EN 1793-2:2018

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions

This document specifies the laboratory method for measuring the airborne sound insulation performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic performance of barriers that can reasonably be assembled inside the testing facility described in EN ISO 10140-2 and EN ISO 10140-4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed on roads in non-reverberant conditions.

Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 2: Produktspezifische Merkmale der Luftschalldämmung in diffusen Schallfeldern

Diese Europäische Norm legt das Laborprüfverfahren zur Ermittlung der Luftschalldämm-Eigenschaften von Lärmschutzwänden an Straßen unter halligen Bedingungen fest. Sie ist bei der Bewertung der produktspezifischen Eigenschaften derjenigen Lärmschutzvorrichtungen an Straßen anzuwenden, die für den Einbau in die in EN ISO 10140-2 und EN ISO 10140-4 beschriebene Prüfeinrichtung geeignet sind.
Dieses Verfahren gilt nicht zur Bestimmung der produktspezifischen Merkmale der Luftschalldämmung von Lärmschutzvorrichtungen an Straßen unter nicht halligen Bedingungen.

Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 2 : Caractéristiques intrinsèques de l'isolation aux bruits aériens dans des conditions de champ acoustique diffus

Le présent documentspécifie la méthode de laboratoire permettant de mesurer la performance d'isolation aux bruits aériens des dispositifs de réduction du bruit du trafic routier dans des conditions de réverbération. Elle traite de l'évaluation de la performance intrinsèque des écrans antibruit qui peuvent raisonnablement être assemblés à l'intérieur de l'installation d'essai décrite dans l'EN ISO 10140-2 et l'EN ISO 10140-4.
La présente méthode n'est pas destinée à la détermination des caractéristiques intrinsèques d'isolation aux bruits aériens des dispositifs de réduction du bruit devant être installés sur les routes dans des conditions non réverbérantes.

Protihrupne ovire za cestni promet - Preskusna metoda za ugotavljanje akustičnih lastnosti - 2. del: Karakteristike, značilne za izolacijo pred zvokom v zraku pri razpršenem zvočnem polju

Ta evropski standard določa laboratorijsko metodo za merjenje lastnosti za izolacijo pred zvokom v zraku pri protihrupnih ovirah za cestni promet v odmevnih pogojih. Zajema vrednotenje značilnih lastnosti ovir, ki jih je mogoče razumno zbrati v laboratoriju, opisanem v standardih EN ISO 10140-2 in EN ISO 10140-4.
Ta metoda ni namenjena ugotavljanju karakteristik, značilnih za izolacijo pred zvokom v zraku, pri protihrupnih ovirah za namestitev na cestah v neodmevnih pogojih.

General Information

• Status: Published
• Publication Date: 26-Jun-2018
• Withdrawal Date: 30-Dec-2018
• ICS: 17.140.30 - Noise emitted by means of transport
• ICS: 93.080.30 - Road equipment and installations
• Technical Committee: CEN/TC 226 - Road equipment
• Drafting Committee: CEN/TC 226/WG 6 - Noise reducing devices
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Jun-2018
• Due Date: 19-May-2018
• Completion Date: 27-Jun-2018
• Ref Project: SIST EN 1793-2:2018 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions

Relations

• Replaces: EN 1793-2:2012 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
• Effective Date: 15-Jul-2018
• Revised: prEN 1793-2 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 2: Produktspezifische Merkmale der Luftschalldämmung in diffusen SchallfeldernDispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 2: Caractéristiques intrinsèques de l'isolation aux bruits aériens dans des conditions de champ acoustique diffusRoad traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions93.080.30Cestna oprema in pomožne napraveRoad equipment and installations17.140.30Emisija hrupa transportnih sredstevNoise emitted by means of transportICS:Ta slovenski standard je istoveten z:EN 1793-2:2018SIST EN 1793-2:2018en,fr,de01-september-2018SIST EN 1793-2:2018SLOVENSKI
STANDARDSIST EN 1793-2:20131DGRPHãþD



SIST EN 1793-2:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1793-2
June
t r s z ICS
s yä s v rä u râ
{ uä r z rä u r Supersedes EN
s y { uæ tã t r s tEnglish Version
Road traffic noise reducing devices æ Test method for determining the acoustic performance æ Part
tã Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions Dispositifs de réduction du bruit du trafic routier æ Méthode d 5essai pour la détermination de la performance acoustique æ Partie
t ã Caractéristiques intrinsèques de l 5isolation aux bruits aériens dans des conditions de champ acoustique diffus
Lärmschutzvorrichtungen an Straßen æ Prüfverfahren zur Bestimmung der akustischen Eigenschaften æ Teil
tã Produktspezifische Merkmale der Luftschalldämmung in diffusen Schallfeldern This European Standard was approved by CEN on
s { February
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s y { uæ tã t r s z ESIST EN 1793-2:2018



EN 1793-2:2018 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Symbols and abbreviations . 7 5 Test arrangement . 7 6 Test procedure and evaluation . 8 6.1 Test method . 8 6.2 Single-number rating of airborne sound insulation, DLR . 8 6.3 Expression of results . 9 7 Measurement uncertainty .
...

SLOVENSKI STANDARD
oSIST prEN 1793-2:2017
01-januar-2017
3URWLKUXSQHRYLUH]DFHVWQLSURPHW3UHVNXVQDPHWRGD]DXJRWDYOMDQMHDNXVWLþQLK
ODVWQRVWLGHO.DUDNWHULVWLNH]QDþLOQH]DL]RODFLMRSUHG]YRNRPY]UDNXSUL
UD]SUãHQHP]YRþQHPSROMX
Road traffic noise reducing devices - Test method for determining the acoustic
performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse
sound field conditions
Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen
Eigenschaften - Teil 2: Produktspezifische Merkmale der Luftschalldämmung in diffusen
Schallfeldern
Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination
de la performance acoustique - Partie 2: Caractéristiques intrinsèques de l'isolation aux
bruits aériens dans des conditions de champ acoustique diffus
Ta slovenski standard je istoveten z: prEN 1793-2
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
oSIST prEN 1793-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1793-2:2017

---------------------- Page: 2 ----------------------
oSIST prEN 1793-2:2017


DRAFT
EUROPEAN STANDARD
prEN 1793-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2016
ICS 17.140.30; 93.080.30 Will supersede EN 1793-2:2012
English Version

Road traffic noise reducing devices - Test method for
determining the acoustic performance - Part 2: Intrinsic
characteristics of airborne sound insulation under diffuse
sound field conditions
Dispositifs de réduction du bruit du trafic routier - Lärmschutzvorrichtungen an Straßen - Prüfverfahren
Méthode d'essai pour la détermination de la zur Bestimmung der akustischen Eigenschaften - Teil
performance acoustique - Partie 2: Caractéristiques 2: Produktspezifische Merkmale der
intrinsèques de l'isolation aux bruits aériens dans des Luftschalldämmung in diffusen Schallfeldern
conditions de champ acoustique diffus
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 226.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1793-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1793-2:2017
prEN 1793-2:2016 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Symbols and abbreviations . 6
4 Test arrangement .
...