Prestressing steels - Protected and sheathed strands for prestressing - Part 2: Sliding strands

This document specifies the specific requirements for sliding protected and sheathed strands (type S).
The general requirements for protected and sheathed high strength steel strands are given in prEN 10369-1.

Spannstähle - Geschützte und gehüllte Litzen für Vorspannen - Teil 2: Schiebbare Litzen

Dieses Dokument legt spezifische Anforderungen an geschützte und gehüllte schiebbare Litzen (Typ S) fest.
Allgemeine Anforderungen an geschützte und gehüllte schiebbare Litzen sind in prEN 10369-1 enthalten.

Aciers de précontrainte - Torons de précontrainte protégés et gainés - Partie 2 : Torons coulissants

Le présent document spécifie les exigences applicables aux torons protégés gainés coulissants (type S).
Les exigences générales relatives aux torons en acier à haute résistance protégés gainés sont fournies par le prEN 10369-1.

Prednapeta jekla - Zaščitena in obložena vlakna za prednapenjanje - 2. del: Drsne žice

General Information

Status
Not Published
Public Enquiry End Date
31-Aug-2019
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
13-May-2024
Due Date
18-May-2024
Completion Date
13-May-2024

Buy Standard

Draft
prEN 10369-2:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 10369-2:2019
01-september-2019
Prednapeta jekla - Zaščitena in obložena vlakna za prednapenjanje - 2. del: Drsne
žice
Prestressing steels - Protected and sheathed strands for prestressing - Part 2: Sliding
strands
Spannstähle - Geschützte und gehüllte Litzen für Vorspannen - Teil 2: Schiebbare Litzen
Aciers de précontrainte - Torons de précontrainte protégés et gainés - Partie 2 : Torons
coulissants
Ta slovenski standard je istoveten z: prEN 10369-2
ICS:
77.080.20 Jekla Steels
oSIST prEN 10369-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 10369-2:2019

---------------------- Page: 2 ----------------------
oSIST prEN 10369-2:2019


DRAFT
EUROPEAN STANDARD
prEN 10369-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2019
ICS 77.140.15
English Version

Prestressing steels - Protected and sheathed strands for
prestressing - Part 2: Sliding strands
Aciers de précontrainte - Torons de précontrainte Spannstähle - Geschützte und gehüllte Litzen für
protégés et gainés - Partie 2 : Torons coulissants Vorspannen - Teil 2: Schiebbare Litzen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 4.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10369-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 10369-2:2019
prEN 10369-2:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Classification and designation . 4
4.1 Classification . 4
4.2 Designation. 4
5 Manufacturing process . 5
6 Requirements for materials used for sliding protected and sheathed strands. 5
7 Requirements for sliding protected and sheathed strands . 5
7.1 Overall diameter. 5
7.2 Straightness .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.