1015/2010 - Commission Regulation (EU) No 1015/2010 of 10 November 2010 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for household washing machines

This Technical Specification provides a method for the evaluation of the rinsing effectiveness of household clothes washing machines, washer dryers and commercial washing machines. The amount of residual linear alkylbenzene sulfonate surfactant (LAS) extracted from the unstained test swatches of the strips used in the washing performance test is determined. This is accomplished by measuring the ultraviolet (UV) light absorbance at the wavelength particular to LAS, a key ingredient of the detergent.
Assuming a fixed linear relationship between LAS amount and quantity of detergent mixture and using a concentration versus absorbance curve developed as part of this procedure, the absorbance values are then converted into detergent concentrations, which together with the test solution mass data, yields detergent quantities. This assumption is done, because in the frame of this test it is not possible to determine the exact amount of LAS involved, even in the concentration curves, but only the amount of detergent used.
On the textiles, this linear relationship is not given, but it is nevertheless used to express the amount of LAS as determined by UV light absorbance measurements in terms of a detergent amount.
Using a concentration versus absorbance curve developed as part of this procedure, the absorbance values can then be converted into detergent concentrations, which together with the test solution mass data, yields detergent quantities.

IEC 60456:2010(E) specifies methods for measuring the performance of clothes washing machines for household use, with or without heating devices utilising cold and/or hot water supply. It also deals with appliances for water extraction by centrifugal force (spin extractors) and is applicable to appliances for both washing and drying textiles (washer-dryers) with respect to their washing related functions. This International Standard also covers washing machines which specify the use of no detergent for normal use. This edition includes the following significant changes from the previous edition. Modified test load mass requirement for cases where: - rated capacity of test machine is not declared; - introduction of soft water option; - expanded stain/soil set; - improved method of loading and folding test load items to better suit vertical axis, horizontal axis and twin tub systems; - revised and amended reference machine specifications reflecting full qualification on new Electrolux Wascator CLS; - new reference programmes for lower temperature and vertical axis systems; - refined rinsing efficiency method; - introduction of low power modes "OFF" and "Left On"; - new annex regarding uncertanity of measurements.

IEC 60456:2010(E) specifies methods for measuring the performance of clothes washing machines for household use, with or without heating devices utilising cold and/or hot water supply. It also deals with appliances for water extraction by centrifugal force (spin extractors) and is applicable to appliances for both washing and drying textiles (washer-dryers) with respect to their washing related functions. This International Standard also covers washing machines which specify the use of no detergent for normal use. This edition includes the following significant changes from the previous edition. Modified test load mass requirement for cases where:
- rated capacity of test machine is not declared;
- introduction of soft water option;
- expanded stain/soil set;
- improved method of loading and folding test load items to better suit vertical axis, horizontal axis and twin tub systems;
- revised and amended reference machine specifications reflecting full qualification on new Electrolux Wascator CLS;
- new reference programmes for lower temperature and vertical axis systems;
- refined rinsing efficiency method;
- introduction of low power modes "OFF" and "Left On";
- new annex regarding uncertanity of measurements.

IEC 60704-2-4:2011 These particular requirements apply to single unit electrical washing machines and the washing and spinning function of combined appliances for household and similar use and to spin extractors for household and similar use. This third edition cancels and replaces the second edition (2001). Main changes are: - measurement uncertainty and standard deviations are taken into account, - definitions of standard test load and standard test program are modified, - test enclosure was replaced by common test enclosure defined in Part 1 and - information to be reported is modified. This publication is to be read in conjunction with  IEC 60704-1:2010.

These particular requirements apply to single unit electrical washing machines and the washing and spinning function of combined appliances for household and similar use and to spin extractors for household and similar use.

This document specifies characteristics for compact laminate panels and HPL composite panels both for non-structural uses in interior or external wall and ceiling finish applications (including in suspended ceiling).
This document deals with compact laminate panels of thickness 2 mm and greater.
The compact laminate panels are produced by using a high pressure process and the HPL composite panels are produced bonding an HPL sheet to a substrate.
This document covers compact laminate panels with the following types of laminates:
-   compact laminates, as defined in EN 438 4:2016;
-   exterior-grade compact laminates, as defined in EN 438 6:2016;
-   pearlescent compact laminates, metal compact laminates and wood veneer compact laminates, as defined in EN 438 8:2018;
-   coloured core layer compact laminates and metal reinforced core layer compact laminates, as defined in EN 438 9:2017.
This document covers full size and cut-to-size compact laminate panels and HPL composite panels, e.g. tiles and sidings.
This document specifies only compact laminate panels and HPL composite panels mechanically fixed using e. g. screws or rivets.
Both the compact laminate panels and HPL composite panels may contain flame retardant to improve their reaction to fire performance.
This document also specifies provisions for the assessment and verification of constancy of performance (AVCP) of the characteristics and includes provisions for marking these panels.
This document does not cover:
a)   HPL sheets less than 2 mm thick as defined in EN 438-3:2016, EN 438-8:2018 or EN 438-9:2017, which are not glued on a substrate;
b)   overlaid or veneered wood-based panels, where the overlay/veneer is not an HPL;
c)   HPL composite panels intended for use as floor coverings;
d)   panels used for fire protection of walls or ceilings;
e)   performances of installed systems for walls and ceilings with compact or composite high pressure laminate panels.

This part of this European Standard specifies requirements for compact laminate produced by using an high pressure process and HPL composite panels for interior and/or external wall and ceiling finishes (non-structural) including suspended ceilings.
It covers full size and cut-to-size panels.
The compact laminate panels and HPL composite panels allow to be mechanically fixed using e. g. screws or rivets.
This part of this European Standard also specifies test methods, provisions for the assessment and verification of constancy of performance (AVCP) of these products and includes requirements for marking.
This part of this European Standard does not cover:
a)   HPLs less than 2 mm thick as defined in EN 438 part 3, part 8 and part 9 not glued on a substrate and placed on the market as a separate product;
b)   overlaid or veneered wood-based panels, where the overlay/veneer is not an HPL;
c)   HPL composite panels intended for use as floor coverings;
d)   panels used for fire protection of walls or ceilings.

This Technical Specification provides a method for the evaluation of the rinsing effectiveness of household clothes washing machines, washer dryers and commercial washing machines. The amount of residual linear alkylbenzene sulfonate surfactant (LAS) extracted from the unstained test swatches of the strips used in the washing performance test is determined. This is accomplished by measuring the ultraviolet (UV) light absorbance at the wavelength particular to LAS, a key ingredient of the detergent. Assuming a fixed linear relationship between LAS amount and quantity of detergent mixture and using a concentration versus absorbance curve developed as part of this procedure, the absorbance values are then converted into detergent concentrations, which together with the test solution mass data, yields detergent quantities. This assumption is done, because in the frame of this test it is not possible to determine the exact amount of LAS involved, even in the concentration curves, but only the amount of detergent used. On the textiles, this linear relationship is not given, but it is nevertheless used to express the amount of LAS as determined by UV light absorbance measurements in terms of a detergent amount. Using a concentration versus absorbance curve developed as part of this procedure, the absorbance values can then be converted into detergent concentrations, which together with the test solution mass data, yields detergent quantities.

This European Standard specifies methods for measuring the performance of clothes washing machines for household use, with or without heating devices utilising cold and/or hot water supply. It also deals with appliances for water extraction by centrifugal force (spin extractors) and is applicable to appliances for both washing and drying textiles (washer-dryers) with respect to their washing related functions. This European Standard also covers washing machines which specify the use of no detergent for normal use.
NOTE 1 Tumble dryer performance is assessed to IEC 61121.
The object is to state and define the principal performance characteristics of electric household washing machines and spin extractors and to describe the test methods for measuring these characteristics.
NOTE 2 This European standard applies also to washing machines for communal use in blocks of flats or in launderettes. It does not apply to washing machines for commercial laundries. This European Standard is not intended to be used for the comparative evaluation of detergents.
NOTE 3 This European Standard does not specify acoustical noise requirements for washing machines. Acoustical noise measurements are specified in IEC 60704-1 and IEC 60704-2-4.
NOTE 4 This European Standard does not specify safety requirements for washing machines. Safety requirements are specified in IEC 60335-2-7.

This International Standard specifies methods for measuring the performance of clothes washing machines for household use, with or without heating devices utilising cold and/or hot water supply. It also deals with appliances for water extraction by centrifugal force (spin extractors) and is applicable to appliances for both washing and drying textiles (washerdryers) with respect to their washing related functions. This International Standard also covers washing machines which specify the use of no detergent for normal use. The object is to state and define the principal performance characteristics of electric household washing machines and spin extractors and to describe the test methods for measuring these characteristics.

IEC 60456:2010(E) specifies methods for measuring the performance of clothes washing machines for household use, with or without heating devices utilising cold and/or hot water supply. It also deals with appliances for water extraction by centrifugal force (spin extractors) and is applicable to appliances for both washing and drying textiles (washer-dryers) with respect to their washing related functions. This International Standard also covers washing machines which specify the use of no detergent for normal use. This edition includes the following significant changes from the previous edition. Modified test load mass requirement for cases where: - rated capacity of test machine is not declared; - introduction of soft water option; - expanded stain/soil set; - improved method of loading and folding test load items to better suit vertical axis, horizontal axis and twin tub systems; - revised and amended reference machine specifications reflecting full qualification on new Electrolux Wascator CLS; - new reference programmes for lower temperature and vertical axis systems; - refined rinsing efficiency method; - introduction of low power modes 'OFF' and 'Left On'; - new annex regarding uncertanity of measurements.

This European Standard specifies methods for measuring the performance of clothes washing machines for household use, with or without heating devices utilising cold and/or hot water supply. It also deals with appliances for water extraction by centrifugal force (spin extractors) and is applicable to appliances for both washing and drying textiles (washer-dryers) with respect to their washing related functions. This European Standard also covers washing machines which specify the use of no detergent for normal use.
NOTE 1 Tumble dryer performance is assessed to IEC 61121.
The object is to state and define the principal performance characteristics of electric household washing machines and spin extractors and to describe the test methods for measuring these characteristics.
NOTE 2 This European standard applies also to washing machines for communal use in blocks of flats or in launderettes. It does not apply to washing machines for commercial laundries. This European Standard is not intended to be used for the comparative evaluation of detergents.
NOTE 3 This European Standard does not specify acoustical noise requirements for washing machines. Acoustical noise measurements are specified in IEC 60704-1 and IEC 60704-2-4.
NOTE 4 This European Standard does not specify safety requirements for washing machines. Safety requirements are specified in IEC 60335-2-7.