This document, to be used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of mounted, semi-mounted, trailed and self-propelled
agricultural sprayers for use with plant protection products (PPP) and liquid fertilizer application,
as placed on the market by the manufacturer and designed for a single operator only. In addition, it
specifies the type of information on safe working practices (including residual risks) to be provid...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61310 specifies requirements for the marking of machinery. It gives general rules on marking for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the design and selection of electrical, mechanical, hydraulic and pneumatic equipment used in all types of cranes and their associated fixed load lifting attachments with the objectives of protecting personnel from hazards affecting their health and safety and of ensuring reliability of function.
NOTE   Specific requirements for particular types of cranes, and for load lifting attachments, are given in the appropriate European Standard.
The elec...
view more

    • sale 10% off
    • Standard
      73 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the design and selection of electrical, mechanical, hydraulic and pneumatic equipment used in all types of cranes and their associated fixed load lifting attachments with the objectives of protecting personnel from hazards affecting their health and safety and of ensuring reliability of function.
NOTE   Specific requirements for particular types of cranes, and for load lifting attachments, are given in the appropriate European Standard.
The elect...
view more

    • sale 10% off
    • Standard
      73 pages
      English language
    • e-Library read for
      1 day

This document, when used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters
and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising
from the intended use of these machines by one person (the operator) in the course of normal operation
and service. In addition, it specifies the type of information on safe working practices to b...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day

ISO 4254-7:2017, when used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be ...view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60204 applies to the application of electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipmen...view more

    • sale 10% off
    • Addendum – translation
      6 pages
      Slovenian language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60204 applies to the application of electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipmen...view more

    • sale 10% off
    • Standard – translation
      123 pages
      Slovenian language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      134 pages
      English language
    • e-Library read for
      1 day

2017-05-02: D156/C084 - Ratified standards not being made available.
DOP = DAV + 6 months
DOW = DAV + 36 months
Annex ZZ for MD 2006/42/EC available in EN 60947-5-5:1997/A11.

    • sale 10% off
    • Amendment
      18 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following. This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled walk-behind electrically powered lawnmowers. This standard applies in conjunction with EN 60335-1. This European Standard does not apply to - lawn trimmers, lawn edge trimmers, lawn edgers, flail mowers, scrub cutters, automatic (robot) lawn mowers, sickle-bar mowers, agricultural mowers, trailing seat/sulky units...view more

    • sale 10% off
    • Standard
      80 pages
      English language
    • e-Library read for
      1 day

2017-05-02: D156/C084 - Ratified standards not being made available.
DOP = DAV + 6 months
DOW = DAV + 36 months
Annex ZZ for MD 2006/42/EC available in EN 60947-5-5:1997/A11.

    • sale 10% off
    • Amendment
      18 pages
      English language
    • e-Library read for
      1 day

This part of ISO 3691 gives safety requirements and the means for their verification, additional to those
of ISO 3691-1, for industrial trucks with a vertical, non-tilting mast:
a) those trucks having an elevating operator position, and order‑picking trucks, as defined in
ISO 5053-1, where the elevating operator position and the load‑handling device lifts to a height of
more than 1 200 mm above ground level;
b) lateral- and front-stacking trucks, as defined in ISO 5053-1, designed to travel...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

ISO 3691-3:2016 gives safety requirements and the means for their verification, additional to those of ISO 3691‑1, for industrial trucks with a vertical, non-tilting mast:
a) those trucks having an elevating operator position, and order‑picking trucks, as defined in ISO 5053‑1, where the elevating operator position and the load‑handling device lifts to a height of more than 1 200 mm above ground level;
b) lateral- and front-stacking trucks, as defined in ISO 5053‑1, designed to travel with a l...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies basic requirements for the laboratory testing of vibration transmission
through a vehicle seat to the occupant. These methods for measurement and analysis make it possible
to compare test results from different laboratories for equivalent seats.
It specifies the test method, the instrumentation requirements, the measuring assessment method and
the way to report the test result.
This document applies to specific laboratory seat tests which evaluate vibration transmiss...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

ISO 10326-1:2016 specifies basic requirements for the laboratory testing of vibration transmission through a vehicle seat to the occupant. These methods for measurement and analysis make it possible to compare test results from different laboratories for equivalent seats.
It specifies the test method, the instrumentation requirements, the measuring assessment method and the way to report the test result.
ISO 10326-1:2016 applies to specific laboratory seat tests which evaluate vibration transm...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies functional requirements and design principles for the emergency
stop function on machinery, independent of the type of energy used.
It does not deal with functions such as reversal or limitation of motion, deflection of emissions (e.g.
radiation, fluids), shielding, braking or disconnecting, which can be part of the emergency stop function.
The requirements for this International Standard apply to all machines, with exception to:
— machines where an eme...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

ISO 13850:2015 Standard specifies functional requirements and design principles for the emergency stop function on machinery, independent of the type of energy used.
It does not deal with functions such as reversal or limitation of motion, deflection of emissions (e.g. radiation, fluids), shielding, braking or disconnecting, which can be part of the emergency stop function.
The requirements for this International Standard apply to all machines, with exception to:
- machines where an emergency...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This standard specifies safety and hygiene requirements for the design and manufacture of dough sheeters used in the food industry and shops (bread-making, pastry-making, sweet industries, bakeries, confectioners, delicatessens, catering facilities, etc) for reducing the thickness of a solid mass of dough or pastry by rolling it out. The operation is generally carried out by passing the dough back and forth between the rollers whose distance apart is reduced progressively either by manual adjust...view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety and hygiene requirements for the design and manufacture of dough sheeters, as described in Clause 3, used in the food industry and craft activities (bread-making, pastry-making, sweet industries, bakeries, confectioners, delicatessens, catering facilities, etc.) for reducing the thickness of a solid mass of dough or pastry by rolling it out.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the transpor...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

2013-02-28 EMA: Draft for // vote received in ISO/CS (see notification of 2014-03-28 in dataservice).
2013-02-28 EMA: Draft for // ENQ received in ISO/CS (see notification of 2013-02-28 in dataservice).
2011-10-21 EMA: ISO decided to cancel the revision of ISO 5349-2 and to launch an amendment instead. This WI has been updated accordingly.

    • sale 10% off
    • Amendment
      21 pages
      English language
    • e-Library read for
      1 day

2013-02-28 EMA: Draft for // vote received in ISO/CS (see notification of 2014-03-28 in dataservice).
2013-02-28 EMA: Draft for // ENQ received in ISO/CS (see notification of 2013-02-28 in dataservice).
2011-10-21 EMA: ISO decided to cancel the revision of ISO 5349-2 and to launch an amendment instead. This WI has been updated accordingly.

    • sale 10% off
    • Amendment
      21 pages
      English language
    • e-Library read for
      1 day

This International Standard provides technical information on the design of textile machinery
with reduced noise emissions. Textile machines with a significant noise hazard are defined in
ISO 11111 (all parts).
This International Standard supports the technical designer with the development of low-noise textile
machinery. For this purpose, the significant sources of noise of the individual types of textile machines
and suitable noise control measures are described.
Elements needed for the ...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      34 pages
      German language
    • e-Library read for
      1 day

This European Standard specifies the requirements, test methods, marking and information to be provided by the manufacturer/supplier for Suspended Access Equipment (SAE).
It is applicable to both permanent and temporary equipment which may be powered or hand operated and which are defined in Section 4.
The requirements of this standard include the rails, tracks and other support systems on which SAE depend for their integrity and safety as well as taking into account all associated loads and f...
view more

    • sale 10% off
    • Standard
      131 pages
      English language
    • e-Library read for
      1 day

1.1   Application
This European Standard specifies the requirements, test methods, marking and information to be provided by the manufacturer/supplier for Suspended Access Equipment (SAE).
It is applicable to both permanent and temporary equipment which may be powered or hand operated and which are defined in Clause 3.
The requirements of this standard include the rails, tracks and other support systems on which SAE depend for their integrity and safety as well as taking into account all ass...
view more

    • sale 10% off
    • Standard
      131 pages
      English language
    • e-Library read for
      1 day

EN 50434 specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral electric motor, not exceeding 250 V single phase, with or without vacuum assisted collection which are designed to reduce organic material to smaller pieces and are used in a stationary position by an operator standing on the ground. This standard applies to shredders/chippers with feed intake openings or segments, in this standard referred to as feed safety...view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day

ISO 23771:2015 provides technical information on the design of textile machinery with reduced noise emissions. Textile machines with a significant noise hazard are defined in ISO 11111 (all parts).
ISO 23771:2015 supports the technical designer with the development of low-noise textile machinery. For this purpose, the significant sources of noise of the individual types of textile machines and suitable noise control measures are described.

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      34 pages
      German language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following.
This European Standard specifies safety requirements and their verification for the design and
construction of electric powered hand-held scissors type grass shears with a maximum cutting
width of 200 mm designed primarily for cutting grass, their rated voltage being not more than 250 V
for a.c. or 75 V d.c.
In this European Standard the term “machine” means “electric powered scissors type grass shear”.
This European Standard does not app...
view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following.
This European Standard specifies safety requirements and their verification for the design and
construction of electric powered walk-behind and hand-held lawn trimmers and lawn edge
trimmers, with cutting element(s) of non-metallic filament line or freely pivoting non-metallic
cutter(s), with a kinetic energy of not more than 10 J each, used by a standing operator for cutting
grass, their rated voltage being not more than 250 V for a.c. or...
view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

This standard specifies safety and hygienic design requirements for the manufacture of machines used for the production of pies, tarts, pasties, en croute products and other similar items where the pastry cases are formed by the closing under pressure of one or more forming heads. The standard applies to the following three basic types of machine:
- machines where operators hands enter hazard zone 1 (see 4.1) at each cycle;
- machines which are loaded outside hazard zone 1;
- automatic machin...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies the maximum permissible values of unbalances for bonded
abrasive wheels with an outside diameter D ≥ 125 mm and maximum operating speed vs ≥ 16 m/s, in the
as-delivered condition.
It also specifies the method for measuring the unbalance and the practical method for testing whether
a grinding wheel is acceptable or not.
This International Standard is applicable to bonded abrasive wheels in the as-delivered condition.
This International Standard is not a...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

1.1   This European Standard specifies safety and hygiene requirements for the design and manufacture of intermediate provers with powered moving pocket carriers as described in Clause 3 and used in the food industry, pastry-making, bakeries, etc. for giving a resting time to dough between different phases of the process.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the installation, adjustment, operation, cleaning, maintenance, dismantlin...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

ISO 6103:2014 specifies the maximum permissible values of unbalances for bonded abrasive wheels with an outside diameter D ≥ 125 mm and maximum operating speed vs ≥ 16 m/s, in the as-delivered condition. It also specifies the method for measuring the unbalance and the practical method for testing whether a grinding wheel is acceptable or not.
It is applicable to bonded abrasive wheels in the as-delivered condition.
It is not applicable to diamond, cubic boron nitride or natural stone grinding ...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

EN 16228-3, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014.

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

EN 16228-5, together with part 1, deals with all significant hazards for diaphragm walling equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

EN ISO 11200 is the frame standard introducing the basic group, ISO 11201, ISO 11202, ISO 11203, ISO 11204 and ISO 11205, on the determination of emission sound pressure levels at work stations and other specified positions. It gives guidance for: - facilitating the writing of noise test codes; - providing physical explanations of this noise emission quantity compared to other noise quantities (see 4.1 to 4.3); - comparing the different measurement methods offered by the group (see Table 1); - f...view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

EN 16228-4, together with part 1, deals with all significant hazards for foundation equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014 This document does not repeat the requirements from EN 16228-1:2014 but adds or replaces the requirements for appli...view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

EN 16228-7, together with part 1, deals with all significant hazards for interchangeable auxiliary equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014. This document does not repeat the requirements from EN 16228-1, but adds or replaces the requiremen...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

EN 16228-1 specifies the common safety requirements for drilling and foundation equipment. Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment (see Annex A), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage...view more

    • sale 10% off
    • Standard
      152 pages
      English language
    • e-Library read for
      1 day

EN 16228-2, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). In this document the general term “mobile drill rig” covers several different types of machines for use in: - civil engineering; - geotechnical engineering (inclu...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

EN 16228-6, together with part 1, deals with all significant hazards for jetting, grouting and injection equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014 This document does not repeat the requirements from EN 16228-1:2014, but adds or replaces the ...view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following. This European Standard specifies safety requirements and their verification for the design and construction of electric powered hand-held scissors type grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass, their rated voltage being not more than 250 V for a.c. or 75 V d.c. In this European Standard the term “machine” means “electric powered scissors type grass shear”. This European Standard does not apply to ...view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following. This European Standard specifies safety requirements and their verification for the design and construction of electric powered walk-behind and hand-held lawn trimmers and lawn edge trimmers, with cutting element(s) of non metallic filament line or freely pivoting non-metallic cutter(s), with a kinetic energy of not more than 10 J each, used by a standing operator for cutting grass, their rated voltage being not more than 250 V for a.c. or 75 V...view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

EN 12881-1 describes four methods for measuring the propagation of a flame along a conveyor belt which has been exposed to a relatively high localized heat source such as a fire. The damage suffered by the conveyor belt, as well as its tendency to support combustion, is measured by observing the extent to which the fire spreads along the test piece. Method A uses a test piece 2 m in length and consumes propane gas through the burner at the rate of (1,30 ± 0,05) kg per 10 min. Method B uses a tes...view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral electric motor, not exceeding 250 V single phase, with or without vacuum assisted collection which are designed to reduce organic material to smaller pieces and are used in a stationary position by an operator standing on the ground. This standard applies to shredders/chippers with feed intake openings or segments, in this standard referred to ...view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day