This Technical Report gives guidelines for estimating, assessing and documenting the daily vibration exposure due to the use of hand-held power tools and hand-guided machines, according to the requirements of the European Physical Agents Directive (vibration) 2002/44/EC. This Technical Report is addressed to competent services for the assessment of vibration exposure at the workplace and to national authorities and industrial organisations. It helps to establish documentation for specific machin...view more

    • sale - 10%
    • Technical report
      39 pages
      English language
    • sale - 10%
    • Technical report
      38 pages
      English language

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2018-11-02: this prA covers common mods to prEN IEC 62841-3-9 (PR=67950)

    • sale - 10%
    • Amendment
      9 pages
      English language

IEC 62841-3-9:2020 is available as IEC 62841-3-9:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62841-3-9:2020 applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might simply be referred to as saw or too...view more

    • sale - 10%
    • Standard
      38 pages
      English language

2020-01-06 JF: the Annex ZZ which had been approved by  the BT is not the most recent one -> need to submit the correct Annex ZZ to the BT. The BT document under preparation.
2019-11-05 JF: Through the BT decision D163/C100, the BT approved the revised Annex ZZ of the standard. Standard under publlication.
NEXT ACTION: CCMC ACTION BY 2019-08-30: submission of the revised Annex ZZ for the BT approval.
Compliant assessment of the Annex ZA received.
2019-05-08 JF: HAS Consultants confir...
view more

    • sale - 10%
    • Amendment
      9 pages
      English language

This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of feeding machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this ...view more

    • sale - 10%
    • Standard
      27 pages
      English language
    • sale - 10%
    • Standard
      22 pages
      English language

This European Standard specifies the safety requirements of self-propelled variable-reach rough-terrain trucks (hereafter referred to as trucks), intended to handle loads, equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is fitted.
For the purpose of this standard, rough-terrain variable-reach trucks are designed to transport, lift and place loads and can be driven on unimproved terrain.
Fork arms are considered to be part o...
view more

    • sale - 10%
    • Standard
      69 pages
      English language

Processing mineral and by-products (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore, production and demolition waste, slag handling, hard and soft rock aggregates, coal) in construction and surface mining.
It deals with the following types of individual machines for the mechanical processing of minerals and similar solid materials:
-   feeding machinery as per part 2;
-   crushing machinery as per part 3;
-   milling machinery as per part 3;
-   screening machinery ...
view more

    • sale - 10%
    • Standard
      89 pages
      English language
    • sale - 10%
    • Standard
      72 pages
      English language

This part of prEN 1009 to be used together with prEN 1009-1, specifies the safety requirements and their verification for the design and construction of machinery for cleaning, water recycling, mud treatment and sorting (other than screens) for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
The requirements of this ...
view more

    • sale - 10%
    • Standard
      39 pages
      English language
    • sale - 10%
    • Standard
      37 pages
      English language

This part of prEN 1009, to be used together with prEN 1009-1, specifies the safety requirements and their verification for the design and construction of screening machinery for the mechanical processing in quarrying, recycling and processing mineral and by-products as defined in 3.1.
In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this part of prEN 1009 are different from those whic...
view more

    • sale - 10%
    • Standard
      37 pages
      English language
    • sale - 10%
    • Standard
      30 pages
      English language

This part of prEN 1009 to be used together with prEN 1009-1, specifies the safety requirements and their verification for the design and construction of crushing and milling machinery for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this part of prEN 1009 are different from those which are sta...
view more

    • sale - 10%
    • Standard
      32 pages
      English language
    • sale - 10%
    • Standard
      28 pages
      English language

This document, to be used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of mounted, semi-mounted, trailed and self-propelled
agricultural sprayers for use with plant protection products (PPP) and liquid fertilizer application,
as placed on the market by the manufacturer and designed for a single operator only. In addition, it
specifies the type of information on safe working practices (including residual risks) to be provid...
view more

    • sale - 10%
    • Standard
      36 pages
      English language
    • sale - 10%
    • Standard
      27 pages
      English language

This European Standard applies to "Side by Side machines" or "SbSs" as defined in Clause 3, propelled by internal combustion engines using liquid fuels (petrol, diesel, bio-fuels, lpg) and/or electric drive, intended to be used primarily on unpaved surfaces and not intended to be used on public roads ).
This European Standard defines safety requirements relating to the elements of design, operation, and maintenance of Side by Side machines and deals with all significant hazards, hazardous situa...
view more

    • sale - 10%
    • Standard
      88 pages
      English language
    • sale - 10%
    • Standard
      80 pages
      English language

EN-ISO 11553-1 describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825).Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553-3:2013.This document is applicable to machines using laser radiation to process materia...view more

    • sale - 10%
    • Standard
      31 pages
      English language
    • sale - 10%
    • Standard
      23 pages
      English language

Replace the two dashed items in the fourth paragraph by:  
-   children playing with the appliance;
-   the use of the appliance by children;
It is recognized that very vulnerable people may have needs beyond the level addressed in this standard.

    • sale - 10%
    • Amendment
      14 pages
      English language

1 Scope
Replace the second and third paragraphs with the following:
This European Standard deals with the safety of electric appliances for skin exposure to ultraviolet and infrared radiation, their maximum rated voltages being not more than 250 V for single phase and 480 V for all others.
NOTE Z101 Examples of appliance for household environment are appliances for typical housekeeping functions used in the household environment and appliances for typical housekeeping functions used by non-...
view more

    • sale - 10%
    • Amendment
      12 pages
      English language

This document specifies safety requirements and their verification for design and construction of transportable, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping.
This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components and by separat...
view more

    • sale - 10%
    • Standard
      74 pages
      English language
    • sale - 10%
    • Standard
      64 pages
      English language

EN-ISO 19432-1 specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine-driven cut-off machines intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bonded-abrasive and/or super-abrasive (for example diamond) cut-off wheel having a maximum outer diam...view more

    • sale - 10%
    • Standard
      62 pages
      English language
    • sale - 10%
    • Standard
      56 pages
      English language

Next steps: the formal vote of the European Amendment
2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.

    • sale - 10%
    • Amendment
      6 pages
      English language

This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825).
Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553‑3:2013.
This document is applicable to machines using laser radiation to process mate...
view more

    • sale - 10%
    • Standard
      31 pages
      English language
    • sale - 10%
    • Standard
      23 pages
      English language