This European Standard covers all life cycle stages, from cradle to grave, namely product stage, construction process stage, use stage and end-of-life stage of glass products (see point 4), used in buildings.
While covering all life cycle stages, this PCR primarily focuses on the product stage, in particular the manufacturing of flat glass and the consequent processing into flat glass products (as listed in point 4.), from cradle to gate. It covers raw materials and energy supply, transport, f...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This document covers all life cycle stages, from cradle to grave, namely product stage, construction process stage, use stage and end-of-life stage of glass products (see Clause 4), used in buildings.
While covering all life cycle stages, this PCR primarily focuses on the product stage, in particular the manufacturing of flat glass and the consequent processing into flat glass products (as listed in point 4.), from cradle to gate. It covers raw materials and energy supply, transport, flat glass...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This Technical Specification specifies a method for digestion of construction products for the analysis of the content of inorganic substances. The method is based on the use of aqua regia. Solutions produced by this method are suitable for analysis by e.g. inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma emission spectrometry (ICP-OES), by atomic absorption spectrometry (CVAAS, CVAFS), for the following elements: aluminium, antimony, arsenic, barium, berylliu...view more

    • sale 10% off
    • Technical specification
      20 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of coated glass for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of gas leakage rate and specifies the requirements for limit values for gas leakage rate and gas concentration for gas filled insulating glass units made
a) in accordance with prEN 1279-1:2015 and prEN 1279-6:2015 or
b) for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This European Standard (all parts) covers the requirements for insulating glass units. The main intended uses of the insulating glass units are installations in windows, doors, curtain walling, structural sealant glazing, roofs and partitions.
The achievement of the requirements of this standard indicates that insulating glass units fulfil the needs for intended use and ensures by means of the evaluation of conformity to this standard that, visual, energetic, acoustic, safety parameters do not ...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of insulating glass units (IGU) for use in buildings.
NOTE 1    For glass products with electrical wiring or connections for e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
NOTE 2   Units for which the intended use is only ‘artistic’ and therefore no essential requirement is required, are not subject to CE marking and are not part of this standard.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and describes the test methods for edge seal components and inserts. This includes the identification, the determination of physical attributes and the evaluation of characteristics for use in substitution rules in accordance with prEN 1279-1:2015.
For the purpose to demonstrate that edge seal components will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6, prEN 1279-2:2015 and prEN 1279-3:2015 ...
view more

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a) in accordance with prEN 1279-1:2015 and prEN 1279-6:2015 or
b) for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the routine factory production control, the periodic testing and inspection and test methods to verify that an insulating glass unit (IGU) conforms to the system description.

    • sale 10% off
    • Draft
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of coated glass for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This document describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018; or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This document covers the product standard of insulating glass units (IGU) for use in buildings.
Units for which the intended use is only artistic and therefore no essential characteristics are required, are not subject to CE marking and are not part of this standard.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This document (all parts) covers the requirements for insulating glass units. The main intended uses of the insulating glass units are installations in windows, doors, curtain walling, bonded glazing for doors, windows and curtain walling, roofs and partitions.
The achievement of the requirements of this standard indicates that insulating glass units fulfil the needs for intended use and ensures by means of the evaluation of conformity to this standard that, visual, energetic, acoustic, safety ...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements and describes the test methods for edge seal components and inserts. This includes the identification, the determination of physical attributes and the evaluation of characteristics for use in substitution rules in accordance with EN 1279 1:2018.
For the purpose to demonstrate that edge seal components will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6, EN 1279 2:2018 and EN 1279 3:2018 also apply.

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of gas leakage rate and specifies the requirements for limit values for gas leakage rate and gas concentration for gas filled insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018, or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document describes the routine factory production control, the periodic testing and inspection and test methods to verify that an insulating glass unit (IGU) conforms to the system description.

    • sale 10% off
    • Draft
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This Technical Specification specifies methods for obtaining the aqua regia digestible content of construction products. Solutions produced by this method are for analysis by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled spectrometry (ICP-OES) for the following 67 elements:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), cesium (Cs), chromium (Cr), cobalt (Co), copper (Cu...
view more

    • sale 10% off
    • Technical specification
      20 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of basic alumino silicate glass products for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies minimum quality requirements (in respect of optical, visual and edge faults) and durability tests for painted glass for internal use in building.
This standard applies to testing of paints that can be used to produce painted glass. The test of durability are undertaken on soda lime silicate glass  as being a representative substrate.
Painted glass, that conforms to this standard, may have substrate as follows: basic glass, special basic glass, chemically strengt...
view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the assessment and verification of constancy of performance and the factory production control of basic alumino silicate glass products for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies minimum quality requirements (in respect of optical, visual and edge faults) and durability tests for painted glass for internal use in building.
This standard applies to testing of paints that can be used to produce painted glass. The test of durability are undertaken on soda lime silicate glass  as being a representative substrate.
Painted glass, that conforms to this standard, may have substrate as follows: basic glass, special basic glass, chemically strengt...
view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

1   Scope
This European Standard gives principles of glazing as well as recommendations on the selection of components, e.g. frame sections, beads, drainage holes, etc., for fitting glass into frames of any material.
This European Standard applies to all basic types of edge supported vertical and sloping glazing systems, in all types of fixed or opening frames used in buildings.
This European standard specifies also the functions, requirements and installation of glazing blocks within a frame duri...
view more

    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This European Standard defines principles of glazing as well as recommendations on the selection of components, e.g. frame sections, beads, drainage holes, etc., for fitting glazing into frames of any material.
This European Standard applies to all basic types of edge supported vertical and sloping glazing systems, in all types of fixed or opening frames used in buildings.
This European standard specifies also the functions, requirements and installation of glazing blocks within a frame during...
view more

    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies and classifies basic alumino silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and their minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to basic alumino silicate glasses supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a di...
view more

    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies and classifies basic alumino silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and their minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to basic alumino silicate glasses supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a di...
view more

    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This draft European Standard specifies additional information necessary to carry out efficiently and under standardized conditions the determination of the sound reduction index of drywall systems of plasterboard with steel studs according to EN ISO 10140-2 “Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation”. It specifies the additional requirements of the sound reduction measurements, the operating and mounting conditi...view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies information additional to EN ISO 10140 1 necessary to carry out efficiently and under standardized conditions the determination of the sound reduction index of drywall systems of plasterboard with steel studs according to EN ISO 10140 2 “Acoustics — Laboratory measurement of sound insulation of -building elements — Part 2: Measurement of airborne sound insulation”. Observe that all demands in EN ISO 10140 2 should still be fulfilled. In order to decrease the unce...view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass product that has had an adhesive backed polymeric film applied, for use in
buildings. The adhesive backed polymeric film is based on biaxially oriented polyester film as defined in EN 15752-1. This applies to both site and factory applications. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). O...
view more

    • sale 10% off
    • Draft
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

EN 13022-2 deals with the assembling and bonding of glass elements in a frame, window, door or curtain walling construction, or directly into the building by means of structural bonding of the glass element into or onto framework or directly into the building. It gives information to the assembler to enable him to organise his work and comply with requirements regarding quality control. Structural sealant glazing can be incorporated into the façades (curtain walls, doors and windows) or roofs as...view more

    • sale 10% off
    • Draft
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

EN 13022-1 specifies requirements for the suitability for use of supported and unsupported glass products for use in “Structural Sealant Glazing” (SSG) applications. Four schematic drawings of SSG systems are shown in Figure 1 and three section drawings of an SSG type II system are shown in Figure 2 for illustration purposes. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability...view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

EN 15752-1 defines adhesive backed polymeric film based on biaxially oriented polyester film, and the performance characteristics of adhesive backed polymeric film for use on glass in buildings. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to other glass or glazing products, e.g. laminated glass or insulating glass units, when adhesive backed polymeric film is inc...view more

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass product that has had an adhesive backed polymeric film applied, for use in buildings. The adhesive backed polymeric film is based on biaxially oriented polyester film as defined in
FprEN 15752-1. This applies to both site and factory applications.
This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PV...
view more

    • sale 10% off
    • Draft
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard defines adhesive backed polymeric film based on biaxially oriented polyester film, and the performance characteristics of adhesive backed polymeric film for use on glass in buildings.
This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC).
Other requirements, not specified in this standard, may apply to other glass or glazing products, e.g. laminated glass or insulating glass units, when adhesive backed polymer...
view more

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with the assembling and bonding of glass elements in a frame, window, door or curtain walling construction, or directly into the building by means of structural bonding of the glass element into or onto framework or directly into the building.
It gives information to the assembler to enable him to organize his work and comply with requirements regarding quality control.
Structural sealant glazing can be incorporated into the façades (curtain walls, doors and window...
view more

    • sale 10% off
    • Draft
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in Structural Sealant Glazing (SSG) applications. Four schematic drawings of SSG systems are shown in Figure 1 and three section drawings of an SSG type II system are shown in Figure 2 for illustration purposes. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the s...view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

EN 15683-2 covers the evaluation of conformity and the factory production control of thermally toughened soda lime silicate channel shaped safety glass for use in buildings. This also includes requirements subject to regulation.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
This also includes requirements subject to regulation.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings. Information on curved heat soak thermally toughened alkaline earth silicate safety glass is given in Annex B, but this product does not form part of this document. Other requirements, not specified in this document, can apply...view more

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies tolerances, flatness of web and flanges, flange deviation, edgework, fragmentation and physical and mechanical characteristics of monolithic thermally toughened soda lime silicate channel shaped safety glass for use in buildings. Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate channel shaped safety glass, which undergoes an additional treatment, e.g. coating. The additional requirements are specified in the ...view more

    • sale 10% off
    • Draft
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings. For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings. Information on curved heat soak thermally toughened alkaline earth silicate safety glass is given in Annex B, but this product does not form part of this document.
Other requirements, not specified in this document, can appl...
view more

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings.
For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies tolerances, flatness of web and flanges, flange deviation, edgework, fragmentation and physical and mechanical characteristics of monolithic thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate channel shaped safety glass, which undergoes an additional treatment, e.g. coating. The additional requirements are specified in the...
view more

    • sale 10% off
    • Draft
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This Technical Report describes a procedure, based on a diffusion model, to be applied to the estimation of specific migration of substances into drinking water from organic materials intended to come into contact with drinking water. The modelling approach is readily applicable to certain organic materials, as explained in this report. In principle, the diffusion modelling approach is applicable to other organic materials but practical difficulties, in relation to obtaining data to feed into th...view more

    • sale 10% off
    • Technical report
      33 pages
      English language
    • e-Library read for
      1 day

This Technical Report describes a procedure, based on a diffusion model, to be applied to the estimation of specific migration of substances into drinking water from organic materials intended to come into contact with drinking water.
The modelling approach is readily applicable to certain organic materials, as explained in this report. In principle, the diffusion modelling approach is applicable to other organic materials but practical difficulties, in relation to obtaining data to feed into t...
view more

    • sale 10% off
    • Technical report
      33 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of painted glass for internal use in buildings.
Note   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      30 pages
      English language
    • e-Library read for
      1 day

This European Standard gives the principles of determining the load resistance of glass. It gives
-  the general method of calculation, and
-  determination of load resistance by testing for any application.
This European Standard does not determine suitability for purpose. Resistance to applied loads is only one part of the design process, which may also need to take into account
-  environmental factors (e.g. sound insulation, thermal properties),
-  safety characteristics (e.g. fire per...
view more

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a test method for determining the mechanical viscoelastic properties of interlayer materials. The interlayers under examination are those used in the production of laminated glass and/or laminated safety glass. The interlayer properties are needed in order to determine the load resistance of laminated glass as part of a general calculation method for the load resistance of glass.
NOTE   CEN/TC 129/WG 8 "Mechanical strength" is preparing a draft for the calculation...
view more

    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies minimum quality requirements (in respect of optical, visual and edge faults) and durability tests for painted glass for internal use in building.This standard applies only to painted glass  manufactured from annealed soda lime silicate float glass or coated annealed soda lime silicate float glass (see EN 572-1, 572-2 and EN 1096-4). The painted glass may be  translucent, transparent or opaque and supplied in stock/standard sizes and as-cut finished sizes. NOTE 1:...view more

    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day