This European Standard (EN) will provide a general methodology for the assessment of the ability to re-manufacture energy related products.
This EN will elaborate the assessment and process of re-manufacturability in a horizontal, cross-product way. However, a correct assessment can only be done in a product-specific way, taking into account specific parameters of a specific energy related product.

    • sale - 10%
    • Standard
      14 pages
      English language
    • sale - 10%
    • Standard
      17 pages
      English language

This document defines product category rules (PCR) for electronic and electrical products and systems (EEPS).
It specifies the process and requirements on how to conduct life cycle assessment in the context of
environmental declarations.
PCR is complemented by additional product-specific rules (PSR), which further define e.g. functional units and
default scenarios in the product-specific context. Therefore, it also provides guidance on how to develop PSR
in corresponding technical committee...
view more

    • sale - 10%
    • Standard
      49 pages
      English language

This Technical Specification provides a measurement and evaluation method for the determination of the representative maximum temperature reached inside the base load during the washing cycle of a washing machine or washer-dryer.
The mean maximum temperature within the base load is measured with three temperature sensors, which are attached to towels and/or pillowcases placed in different, representative locations inside the drum.
This Technical Specification does not provide a method for me...
view more

    • sale - 10%
    • Technical specification
      15 pages
      English language

This European Standard (EN) provides a general methodology for assessing the proportion of recycled material in energy related products.

    • sale - 10%
    • Standard
      24 pages
      English language
    • sale - 10%
    • Standard
      20 pages
      English language

The standard will cover a set of parameters for assessing durability of energy-related products (ErP) and a general method to describe and assess the durability of ErP, i.e. both electrotechnical and non-electro technical products, respectively it shall be applicable to all energy-related products, that is, all products covered by the Ecodesign Directive 2009/125/EC.

    • sale - 10%
    • Standard
      32 pages
      English language
    • sale - 10%
    • Standard
      28 pages
      English language

This standard will fulfil requirements in Standardisation request M/543 by defining parameters and methods relevant for assessing the ability to repair and reuse products; the ability to upgrade products, excluding remanufacturing; the ability to access or remove certain components, consumables or assemblies from products to facilitate repair, reuse or upgrade and lastly by defining reusability indexes or criteria.

    • sale - 10%
    • Standard
      30 pages
      English language
    • sale - 10%
    • Standard
      28 pages
      English language

The standard will cover a set of parameters for assessing durability of energy-related products (ErP) and a general method to describe and assess the durability of ErP, i.e. both electrotechnical and non-electro technical products, respectively it shall be applicable to all energy-related products, that is, all products covered by the Ecodesign Directive 2009/125/EC.

    • sale - 10%
    • Standard
      32 pages
      English language
    • sale - 10%
    • Standard
      28 pages
      English language

1.1   Scope of prEN 16905
This European Standard specifies the requirements, test methods and test conditions for the rating and performance calculation of air conditioners and heat pumps using either air, water or brine as heat transfer media, with gas-fired endothermic engine driven compressors when used for space heating, cooling and refrigeration, hereafter referred to as "GEHP appliance".
This European Standard only applies to GEHP appliances with a maximum heat input (based on net calorifi...
view more

    • sale - 10%
    • Standard
      51 pages
      English language
    • sale - 10%
    • Standard
      57 pages
      English language

This standard will fulfil requirements in Standardisation request M/543 by defining parameters and methods relevant for assessing the ability to repair and reuse products; the ability to upgrade products, excluding remanufacturing; the ability to access or remove certain components, consumables or assemblies from products to facilitate repair, reuse or upgrade and lastly by defining reusability indexes or criteria.

    • sale - 10%
    • Standard
      30 pages
      English language
    • sale - 10%
    • Standard
      28 pages
      English language

1.1   Scope of prEN 16905
This European Standard specifies the requirements, test methods and test conditions for the rating and performance calculation of air conditioners and heat pumps using either air, water or brine as heat transfer media, with gas-fired endothermic engine driven compressors when used for space heating, cooling and refrigeration, hereafter referred to as "GEHP appliance".
This European Standard only applies to GEHP appliances with a maximum heat input (based on net calorifi...
view more

    • sale - 10%
    • Standard
      51 pages
      English language
    • sale - 10%
    • Standard
      57 pages
      English language

This European standard (EN) provides a general methodology for:
- Assessing the recyclability of energy related products
- Assessing the recoverability of energy related products
- Assessing the ability to access or remove certain components or assemblies from energy related products to facilitate their potential for recycling or other recovery operations.
- Assessing the recyclability of critical raw materials from energy related products.
This EN will elaborate on recyclability and recove...
view more

    • sale - 10%
    • Standard
      25 pages
      English language
    • sale - 10%
    • Standard
      23 pages
      English language

This draft European Standard defines the characteristics of washer-extractors and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for washer-extractors whose net usable cage volume is 400 dm3 (litres) respectively 40 kg and above. In addition, it is recommended for determination of energy consumption and productivity according to Directive 2009/...view more

    • sale - 10%
    • Standard
      82 pages
      English language

This draft European standard defines the characteristics of continuous tunnel washer and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for continuous tunnel washer. In addition it is recommended for determination of energy consumption and productivity according to Directive 2009/125 EC. This standard excludes the energy consumption for dewater...view more

    • sale - 10%
    • Standard
      80 pages
      English language
    • sale - 10%
    • Standard
      73 pages
      English language

This European standard (EN) provides a general methodology for:
- Assessing the recyclability of energy related products
- Assessing the recoverability of energy related products
- Assessing the ability to access or remove certain components or assemblies from energy related products to facilitate their potential for recycling or other recovery operations.
- Assessing the recyclability of critical raw materials from energy related products.
This EN will elaborate on recyclability and recove...
view more

    • sale - 10%
    • Standard
      25 pages
      English language
    • sale - 10%
    • Standard
      23 pages
      English language

This document defines product category rules (PCR) for electronic and electrical products and systems (EEPS).
It specifies the process and requirements on how to conduct life cycle assessment in the context of
environmental declarations.
PCR is complemented by additional product-specific rules (PSR), which further define e.g. functional units and
default scenarios in the product-specific context. Therefore, it also provides guidance on how to develop PSR
in corresponding technical committee...
view more

    • sale - 10%
    • Standard
      49 pages
      English language

This Standard specifies requirements for the verification of performance including energy consumption of refrigerated storage cabinets and counters for professional use in commercial kitchens, hospitals, canteens, preparation areas of bars, bakeries, gelateria, institutional catering and similar professional areas.
The products covered in this Standard are intended to store foodstuffs. It specifies test conditions and methods for checking that the requirements have been satisfied, as well as cl...
view more

    • sale - 10%
    • Standard
      40 pages
      English language

This document specifies classification, requirements for the construction, performance and energy consumption testing of gelato scooping cabinets and pozzetto used to sale and/or display artisan and self made gelato. It specifies test conditions and methods for checking that the requirements have been satisfied, their marking and the list of their characteristics to be declared by the manufacturer.

    • sale - 10%
    • Standard
      57 pages
      English language

This document defines the characteristics of continuous tunnel washer and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for continuous tunnel washer. In addition it is recommended for determination of energy consumption and productivity according to Directive 2009/125 EC. This document excludes the energy consumption for dewatering of the load...view more

    • sale - 10%
    • Standard
      80 pages
      English language
    • sale - 10%
    • Standard
      73 pages
      English language

This document defines the characteristics of washer-extractors and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for washer-extractors whose net usable cage volume is 400 dm3 (litres) respectively 40 kg and above. In addition, it is recommended for determination of energy consumption and productivity according to Directive 2009/125 EC. Further...view more

    • sale - 10%
    • Standard
      82 pages
      English language