94/63/EC - Control of volatile organic compound (VOC) emissions resulting from the storageof petrol and its distribution from terminals to service stations

This document covers the vapour manifold vent valve used to provide controlled venting of the vapour manifold to atmosphere.
It specifies the performance requirements and the critical dimensions of the vapour manifold vent valve. It also specifies the tests necessary to verify compliance of the equipment with this document.
The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [1] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub classification as toxic or corrosive.

This document covers the vapour manifold vent valve used to provide controlled venting of the vapour manifold to atmosphere.
It specifies the performance requirements and the critical dimensions of the vapour manifold vent valve. It also specifies the tests necessary to verify compliance of the equipment with this document.
The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [1] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

This European Standard is applicable to non pressure balanced and pressure-balanced footvalves intended for loading and unloading and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no-sub-classification as toxic or corrosive.

This European Standard is applicable to non-pressure balanced and pressure balanced footvalves intended for loading and unloading and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment with this standard.
Footvalves covered by this European standard are unsuitable for use in applications where the product velocity exceeds 5 m/sec
The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road – (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

This European Standard specifies the following points regarding the minimum requirements for an overfill
prevention system:
functions;
major components;
characteristics;
test methods.
This European Standard is applicable to overfill prevention systems for liquid fuels having a flash point up to but not
exceeding 100 °C, excluding liquefied petroleum gas (LPG). The requirements apply to overfill prevention systems
suitable for use at ambient temperatures in the range from -20 °C to +50 °C, subjected to normal operational
pressure variations.

This European Standard specifies the following points regarding the minimum requirements for an overfill prevention system:
-   functions;
-   major components;
-   characteristics;
-   test methods.
This European Standard is applicable to overfill prevention systems for liquid fuels having a flash point up to but not exceeding 100 °C, excluding liquefied petroleum gas (LPG). The requirements apply to overfill prevention systems suitable for use at ambient temperatures in the range from - 20 °C to + 50 °C, subjected to normal operational pressure variations.

The purpose of this standard is to specify the minimum requirements for an overfill prevention system as defined by : - functions ; - major components ; - characteristics ; - certification requirements ; - test methods. The provisions of this standard are applicable to overfill prevention systems to be used on vehicles transporting liquid fuels (class 3 liquids of ADR/RID - European Agreement concerning the International Carriage of Dangerous Goods by Road / European Agreement concerning the International Carriage of Dangerous Goods by Rail) with flashpoints less than 61 °C of the regulations in force (ADR/RID) and on the corresponding gantries.

The purpose of this standard is to specify the minimum requirements for an overfill prevention system as defined by : - functions ; - major components ; - characteristics ; - certification requirements ; - test methods. The provisions of this standard are applicable to overfill prevention systems to be used on vehicles transporting liquid fuels (class 3 liquids of ADR/RID - European Agreement concerning the International Carriage of Dangerous Goods by Road / European Agreement concerning the International Carriage of Dangerous Goods by Rail) with flashpoints less than 61 °C of the regulations in force (ADR/RID) and on the corresponding gantries.