This document defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines terms and describes component parts for laminated glass and laminated safety
glass for use in building.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines terms relating to raw optical glass and related manufacturing processes. The list is not complete and only comprises those terms for which the definition is considered necessary for correct and adequate understanding of the terminology. It is understood that the interpretations given are those corresponding to the practical usage in this field and that they do not necessarily coincide with those used in other fields.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off

This document defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Draft
    7 pages
    English language
    sale 15% off

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of EN 572 specific to each product type:
-   EN 572-2   Float glass;
-   EN 572-3   Polished wired glass;
-   EN 572-4   Drawn sheet glass;
-   EN 572-5   Patterned glass;
-   EN 572-6   Wired patterned glass;
-   EN 572-7   Wired or unwired channel shaped glass;
-   EN 572-8   Supplied and final cut sizes;
-   EN 572-9   Evaluation of conformity/Product standard.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 3536:2016 defines terms relating to safety glazing materials for road vehicles.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of EN 572 specific to each product type:
-   EN 572-2   Float glass;
-   EN 572-3   Polished wired glass;
-   EN 572-4   Drawn sheet glass;
-   EN 572-5   Patterned glass;
-   EN 572-6   Wired patterned glass;
-   EN 572-7   Wired or unwired channel shaped glass;
-   EN 572-8   Supplied and final cut sizes;
-   EN 572-9   Evaluation of conformity/Product standard.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the characteristics, properties and classification of coated glass for use in building.
Test methods and procedures used to establish durability are in Parts 2 and 3 of this standard.
Factory production control and evaluation of conformity, including Annex ZA, are in Part 4 of this standard.
Test methods for determination of self cleaning performances of coated glass are in Part 5.
This standard applies to coated glass for glazing application for use in normally occupied domestic or commercial premises.
This standard is not applicable to:
   adhesive backed polymeric films on glass (prEN 15755-1);
   mirrors made from silvered float glass (EN 1036-1);
   enamelled glass (EN 12150-1).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the characteristics, properties and classification of coated glass for use in building.
Test methods and procedures used to establish durability are in Parts 2 and 3 of this standard.
Factory production control and evaluation of conformity, including Annex ZA, are in Part 4 of this standard.
Test methods for determination of self cleaning performances of coated glass are in Part 5.
This standard applies to coated glass for glazing application for use in normally occupied domestic or commercial premises.
This standard is not applicable to:
-   adhesive backed polymeric films on glass (prEN 15755-1);
-   mirrors made from silvered float glass (EN 1036-1);
-   enamelled glass.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 11458-1:2011 specifies terminology and definitions for curved glass used in general building construction, furniture, display and various other non-automotive applications.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

This document is a vocabulary which provides a list of terms and associated definitions which are typically used for advanced technical ceramic materials, products, applications, properties and processes. The document contains, in separate lists, those abbreviations which have found general acceptance in scientific and technical literature; they are given together with the corresponding terms and definitions or descriptions.
NOTE 1   This document does not include terms which, though used in the field of advanced technical ceramics, are of a more general nature and are also well known in other fields of technology.
NOTE 2    A list of some European Standards, European Prestandards and Draft European Standards of CEN Technical Committee 184 “Advanced technical ceramics” containing terms defined in this document, is given in the Bibliography.

  • Standard
    97 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

This European Prestandard is a vocabulary which provides a list of terms and associated definitions which are typically used for advanced technical ceramic materials, products, applications, properties and processes. The document contains, in separate lists, those abbreviations which have found general acceptance in scientific and technical literature; they are given together with the corresponding terms and definitions or descriptions.
NOTE 1 This European Prestandard does not include terms which, though used in the field of advanced technical ceramics, are of a more general nature and are also well known in other fields of technology.
NOTE 2 A list of some European Standards, European Prestandards and Draft European Standards of CEN Technical Committee 184 "Advanced technical ceramics" containing terms defined in this European Prestandard, is given in the Bibliography.

  • Standard
    97 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

This document defines and classifies borosilicate glasses for use in building.  It indicates their chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (in respect of optical and visual faults).
This document applies to borosilicate glasses supplied in stock sizes or in cut sizes for final end use.
This document does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m².

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines, specifies and classifies glass ceramics for use in building.  It indicates their chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (in respect of optical and visual faults).
This document applies to glass ceramics supplied in stock sizes or in cut sizes for final end use.
This document does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m².

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines, specifies and classifies glass ceramics for use in building.  It indicates their chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (in respect of optical and visual faults).
This document applies to glass ceramics supplied in stock sizes or in cut sizes for final end use.
This document does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines and classifies borosilicate glasses for use in building.  It indicates their chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (in respect of optical and visual faults).
This document applies to borosilicate glasses supplied in stock sizes or in cut sizes for final end use.
This document does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies regulations for the methods of manufacture and quality control referring to factory made glass blocks and glass pavers. Glass Blocks are used for the construction of building parts like non-bearing walls They have to be used in such a way that they only support their own weight in parallel with the visible surfaces and horizontal load, generated by wind and by impact loads perpendicular to the visible surfaces.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard describes terms used in International Standards dealing with refractory materials and products and that assist in the understanding of the terms and the standards themselves. The descriptions are those generally understood within the refractories industry and should not be taken as absolute definitions.

  • Standard
    35 pages
    English language
    sale 15% off

This European Standard specifies and classifies special basic products - glass ceramics, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to special basic products - glass ceramics supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies and classifies special basic products - glass ceramics, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to special basic products - glass ceramics supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this European Standard specific to each product type:
-   EN 572-2   Float glass
-   EN 572-3   Polished wired glass
-   EN 572-4   Drawn sheet glass
-   EN 572-5   Patterned glass
-   EN 572-6   Wired patterned glass
-   EN 572-7   Wired or unwired channel shaped glass
-   EN 572-8   Supplied and final cut sizes
-   EN 572-9   Evaluation of conformity/Product standard

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines adhesive backed polymeric film and the performance characteristics of adhesive backed polymeric film for use, on glass, in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to adhesive backed polymeric film that is incorporated into assemblies, e.g. laminated glass or insulating glass units. The additional requirements are specified in the appropriate product standard. Adhesive backed polymeric film, in this case, does not lose its mechanical or thermal characteristics.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass that has had an adhesive backed polymeric film applied, for use in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC).

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems.
Only soda lime silicate glasses are taken into consideration in this European Standard.
Plastic glazing is excluded from the scope of this European Standard.
Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 ) "Structural sealant glazing system".
All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2006.
When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines terms for those refractory products and materials, which are classed as AES wool products.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines adhesive backed polymeric film and the performance characteristics of adhesive backed polymeric film for use, on glass, in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to adhesive backed polymeric film that is incorporated into assemblies, e.g. laminated glass or insulating glass units. The additional requirements are specified in the appropriate product standard. Adhesive backed polymeric film, in this case, does not lose its mechanical or thermal characteristics.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass that has had an adhesive backed polymeric film applied, for use in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC).

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this European Standard specific to each product type:
-   EN 572-2   Float glass
-   EN 572-3   Polished wired glass
-   EN 572-4   Drawn sheet glass
-   EN 572-5   Patterned glass
-   EN 572-6   Wired patterned glass
-   EN 572-7   Wired or unwired channel shaped glass
-   EN 572-8   Supplied and final cut sizes
-   EN 572-9   Evaluation of conformity/Product standard

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines terms for those refractory products and materials which are classed as ceramic fibre products.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of this European Standard defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 12543-1:2011 defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part of this European Standard specifies and classifies basic glass products, indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria. Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this European Standard specific to each product type: - EN 572-2 Float glass - EN 572-3 Polished wired glass - EN 572-4 Drawn sheet glass - EN 572-5 Patterned glass - EN 572-6 Wired patterned glass - EN 572-7 Wired or unwired channel shaped glass - EN 572-8 Supplied and final cut sizes - EN 572-9 Evaluation of conformity/Product standard.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this European Standard specific to each product type:
-   EN 572-2   Float glass
-   EN 572-3   Polished wired glass
-   EN 572-4   Drawn sheet glass
-   EN 572-5   Patterned glass
-   EN 572-6   Wired patterned glass
-   EN 572-7   Wired or unwired channel shaped glass
-   EN 572-8   Supplied and final cut sizes
-   EN 572-9   Evaluation of conformity/Product standard

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. Four schematic drawings of SSG systems are shown in Figure 1 and three section drawings of an SSG type II system are shown in Figure 2 for illustration purposes. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems.
Only soda lime silicate glasses are taken into consideration in this European Standard.
Plastic glazing is excluded from the scope of this European Standard.
Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 ) "Structural sealant glazing system".
All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2006.
When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines terms relating to unshaped refractory products and establishes the classification for the various types of products.
Raw materials and crushed or granulated refractory materials which do not contain any binder are excluded.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines terms relating to unshaped refractory products and establishes the classification for the various types of products.
Raw materials and crushed or granulated refractory materials which do not contain any binder are excluded.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part of this European Standard specifies and classifies basic glass products, indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this standard specific to each product type:
EN 572-2   Float glass
EN 572-3   Polished wire glass
EN 572-4   Drawn sheet glass
EN 572-5   Patterned glass
EN 572-6   Wired patterned glass
EN 572-7   Wired or unwired channel shaped glass
EN 572-8   Supplied and final cut sizes
EN 572-9   Evaluation of conformity/Product standard

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part of this European Standard specifies and classifies basic glass products, indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this standard specific to each product type:
EN 572-2   Float glass
EN 572-3   Polished wire glass
EN 572-4   Drawn sheet glass
EN 572-5   Patterned glass
EN 572-6   Wired patterned glass
EN 572-7   Wired or unwired channel shaped glass
EN 572-8   Supplied and final cut sizes
EN 572-9   Evaluation of conformity/Product standard

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened borosilicate safety glass for use in buildings.
Information on curved thermally toughened borosilicate safety glass is given in annex B, but this product does not form part of this standard.
Other requirements, not specified in this standard, may apply to thermally toughened borosilicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating.  The additional requirements are specified in the appropriate product standard.  Thermally toughened borosilicate safety glass, in this case, does not lose its mechanical or thermal characteristics.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the characteristics, properties and classification of coated glass for use in building.  Test methods and procedures used to establish durability are indicated in parts two and three of this standard.  This standard applies to coated glass for glazing application for use in normally occupied domestic or commercial premises.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the characteristics, properties and classification of coated glass for use in building.  Test methods and procedures used to establish durability are indicated in parts two and three of this standard.  This standard applies to coated glass for glazing application for use in normally occupied domestic or commercial premises.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of this European Standard defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of this European Standard defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 12543-1:2011 defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

This European Prestandard is a vocabulary which provides a list of terms and associated definitions which are typically used for advanced technical ceramic materials, products, applications, properties and processes. The document contains, in separate lists, those abbreviations which have found general acceptance in scientific and technical literature; they are given together with the corresponding terms and definitions or descriptions.
NOTE 1  This prestandard does not include terms which, though used in the field of advanced technical ceramics, are of a more general nature and are also well known in other fields of technology.
NOTE 2  A list of some European Standards, European Prestandards and Draft European Standards of CEN Technical Committee 184 "Advanced technical ceramics" containing terms defined in this European Prestandard, is given in the Bibliography.

  • Standardization document
    103 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

This European Prestandard is a vocabulary which provides a list of terms and associated definitions which are typically used for advanced technical ceramic materials, products, applications, properties and processes. The document contains, in separate lists, those abbreviations which have found general acceptance in scientific and technical literature; they are given together with the corresponding terms and definitions or descriptions.
NOTE 1  This prestandard does not include terms which, though used in the field of advanced technical ceramics, are of a more general nature and are also well known in other fields of technology.
NOTE 2  A list of some European Standards, European Prestandards and Draft European Standards of CEN Technical Committee 184 "Advanced technical ceramics" containing terms defined in this European Prestandard, is given in the Bibliography.

  • Standardization document
    103 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines terms for those refractory products and materialswhich are classed as ceramic fibre products.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines terms for those refractory products and materialswhich are classed as ceramic fibre products.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off