01.040.83 - Rubber and plastics industries (Vocabularies)
ICS 01.040.83 Details
Rubber and plastics industries (Vocabularies)
Gummiindustrie. Kunststoffindustrie (Begriffe)
Industries des élastomeres et des plastiques (Vocabulaires)
Gumarska industrija in industrija polimernih materialov (Slovarji)
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 01.040.83 - Rubber and plastics industries (Vocabularies)
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies terms and definitions in the field of plastics related to environmental aspects and provides a common vocabulary for:
- bio-based plastics;
- biodegradability;
- carbon and environmental footprint;
- circular economy;
- design;
- plastics in natural environments;
- reuse and recycling;
- waste management.
This document aims to provide a comprehensive glossary which uses the applicable definitions providing when appropriate additional notes to make these definitions understandable without reference to other documents. Definitions are as far as possible adopted from existing standards but when the original intention or definition is unclear additional context or definitions are provided.
- Standard46 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft43 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It specifies symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks.
NOTE 1 The name of the thermoplastic elastomer is intended to be used in technical papers and presentations followed by the abbreviated term used to designate the elastomer in this document.
NOTE 2 Annex A gives thermoplastic-elastomer abbreviated terms that have been used in the past in materials standards, technical bulletins, textbooks, patents, and trade literature.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies terms and definitions in the field of plastics related to any environmental aspects and provides a common vocabulary basis for:
- biodegradability;
- bio-based plastics;
- carbon and environmental footprint;
- plastics in natural environments;
- recycling, e.g. mechanical and chemical recycling ;
- design ;
- waste management;
- circular economy.
This document aims to provide a comprehensive glossary which uses the applicable definitions providing when appropriate additional notes to make these definitions understandable without reference to other documents. Definitions are as far as possible adopted from existing standards but when the intention or definition is unclear additional context or definitions are updated or added.
This standard aims to provide a comprehensive glossary which uses the applicable definitions providing when appropriate additional notes to make these definitions understandable without reference to other documents.
As far as possible definitions are adapted from existing standards. But when the intention or definition is
unclear additional context or definitions are updated or added
Terms which are also applicable to rubber will be indicated.
- Standard46 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft43 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes a nomenclature system for thermoplastic elastomers based on the chemical
composition of the polymer or polymers involved. It specifies symbols and abbreviated terms used to
identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict
with, but to supplement, existing trade names and trademarks.
NOTE 1 The name of the thermoplastic elastomer is intended to be used in technical papers and presentations
followed by the abbreviated term used to designate the elastomer in this document.
NOTE 2 Annex A gives thermoplastic-elastomer abbreviated terms that have been used in the past in materials
standards, technical bulletins, textbooks, patents, and trade literature.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It specifies symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks. NOTE 1 The name of the thermoplastic elastomer is intended to be used in technical papers and presentations followed by the abbreviated term used to designate the elastomer in this document. NOTE 2 Annex A gives thermoplastic-elastomer abbreviated terms that have been used in the past in materials standards, technical bulletins, textbooks, patents, and trade literature.
- Standard7 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This document establishes a vocabulary of and is limited to those terms in general use throughout the rubber industry. It does not define terms intended for particular rubber products, some of which are given in the vocabulary standards listed in the Bibliography. It does not define terms that are generally understood or adequately defined in other readily available sources such as general dictionaries. The terms are listed in the alphabetical order of the English terms, with an index to the corresponding English terms attached. Symbols are included under their full descriptions.
- Standard67 pagesEnglish languagesale 15% off
- Standard69 pagesFrench languagesale 15% off
- Draft67 pagesEnglish languagesale 15% off
- Draft70 pagesFrench languagesale 15% off
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
- Draft1 pageEnglish languagesale 15% off
- Draft1 pageFrench languagesale 15% off
- Standard1 pageEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Draft1 pageEnglish languagesale 15% off
2012-04-25 EMA: WI deleted due to cancellation of equivalent ISO project.
- Amendment15 pagesEnglish languagesale 10% offe-Library read for1 day
2012-04-25 EMA: WI deleted due to cancellation of equivalent ISO project.
- Amendment15 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard10 pagesEnglish languagesale 15% off
ISO 4223-1:2017 defines a number of significant terms related to pneumatic tyres used in the tyre industry, together with corresponding codes, symbols and values. NOTE 1 For other terms used in this field and their equivalents in other languages, see ISO 3877 (all parts). For terms and definitions relating to wheels/rims, see ISO 3911. NOTE 2 Annex A forms a normative part of this document.
- Standard20 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
ISO 6472:2017 establishes unambiguous abbreviated terms for commonly used rubber compounding ingredients of known, specific chemical composition.
- Standard17 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
This European Standard defines terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.
- Standard63 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.
- Standard63 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61), and general terms and definitions of polymer science used in all aspects of plastics technology.
- Standard139 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 472:2013 defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61) and general terms and definitions of polymer science used in all aspects of plastics technology.
In addition to terms in English and French (two of the three official ISO languages), this vocabulary includes the equivalent terms in German; these have been included under the responsibility of the member body for Germany (DIN). However, only the terms and definitions in the official languages can be considered as ISO terms and definitions.
- Standard139 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 1629:2013 establishes a system of symbols for the basic rubbers in both dry and latex forms, based on the chemical composition of the polymer chain. The purpose is to standardize the abbreviated terms used in industry, commerce and government, and it is not intended to conflict with, but rather to act as a supplement to, existing trade names and trademarks.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
ISO 472:2013 defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61) and general terms and definitions of polymer science used in all aspects of plastics technology. In addition to terms in English and French (two of the three official ISO languages), this vocabulary includes the equivalent terms in German; these have been included under the responsibility of the member body for Germany (DIN). However, only the terms and definitions in the official languages can be considered as ISO terms and definitions.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
ISO 1043-1:2011 defines abbreviated terms for the basic polymers used in plastics, symbols for components of these terms, and symbols for special characteristics of plastics. It includes only those abbreviated terms that have come into established use and its aim is both to prevent the occurrence of more than one abbreviated term for a given plastic and to prevent a given abbreviated term being interpreted in more than one way.
Guidance for the preparation of new abbreviated terms, reference lists of symbols for the components of plastics terms used to form the abbreviated terms for plastics, and a classification of abbreviated terms for polymers grouped by type are given in annexes.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 16589-2:2011 establishes the vocabulary for seals utilizing sealing elements manufactured from suitably formulated compounds, based on thermoplastic materials, such as polytetrafluoroethylene (PTFE) that are considered suitable for use under low-pressure conditions.
- Standard35 pagesEnglish languagesale 15% off
- Standard38 pagesEnglish and French languagesale 10% offe-Library read for1 day
ISO 8153-1:2009 defines terms used for all types of hose assemblies. General terms can be made more precise through the addition of supplementary terminology relating to the design, range of application and/or the material of the hose/hose assembly. Terms and definitions specific to metallic hose assemblies are given in ISO 7369.
- Standard18 pagesEnglish languagesale 15% off
ISO 6194-2:2009 establishes the appropriate vocabulary for seals utilizing elastomeric sealing elements where the terms and definitions given in ISO 5598 apply. These seals are considered suitable for use under low-pressure conditions.
- Standard50 pagesEnglish languagesale 15% off
This European Standard specifies definitions and requirements applicable to structural adhesives whose storage life is limited by possible change of properties.
NOTE Structural adhesives and their related materials are herein referred to as "adhesives".
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
This standard lists and defines terms used in the adhesive tapes industry and terms and definitions relating to adhesive tapes in those industries that use adhesive tapes. Electrical and medical adhesive tapes are not covered by this standard. NOTE In addition to terms used in the three official CEN/CENELEC languages (English, French and German), this European standard gives the equivalent terms in the Italian and Spanish languages in an informative annex ; these are published under the responsibility of the National Committee/member body for Italy and Spain. However, only the terms and definitions given in the official languages can be considered as EN terms and definitions.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies definitions and requirements applicable to structural adhesives whose storage life is limited by possible change of properties.
NOTE Structural adhesives and their related materials are herein referred to as "adhesives".
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
This standard lists and defines terms used in the adhesive tapes industry and terms and definitions relating to adhesive tapes in those industries that use adhesive tapes. Electrical and medical adhesive tapes are not covered by this standard. NOTE In addition to terms used in the three official CEN/CENELEC languages (English, French and German), this European standard gives the equivalent terms in the Italian and Spanish languages in an informative annex ; these are published under the responsibility of the National Committee/member body for Italy and Spain. However, only the terms and definitions given in the official languages can be considered as EN terms and definitions.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesEnglish languagesale 15% off
This part presents definitions of terms, in English and French, relating to solid tyres, in particular: general definitions, definitions concerning structure, components and dimensions of solid tyres. For definitions of terms relating to pneumatic tyres see Part 1. For other terms used in this field, together with their equivalents in other languages see ISO 3877. For terms relating to wheels/rims, and their definitions see ISO 3911. This second edition cancels and replaces the first edition (1983), in which definitions 1.2 and 2.1 have been modified.
- Standard6 pagesEnglish languagesale 15% off
Defines in English and French 36 terms and 25 letter symbols used in the designation, production and use of crosslinkable prepregs. These include the terms concerning raw materials, types of prepreg products, and special grades of prepregs. The symbols, which refer specifically to prepreg products are designating product type, resin type, reinforciment type, reinforcement form and reinforcement orientation.
- Standard6 pagesEnglish languagesale 15% off
Defines in English and French 135 terms of structure, operating conditions, dimensions and geometry of the rollers, surface characteristics of plane and grooved rollers and balance. Alphabetical indices in English and French.
- Technical report12 pagesEnglish languagesale 15% off
Gives the terms in three columns, the first one gives the English terms. The second column gives the French terms, and the third column gives Russian terms; these terms are repeated in alphabetical indexes.
- Standard6 pagesEnglish languagesale 15% off
Gives the terms in three columns, the first one gives the English, the second the French and the third one the Russian terms. The principal terms (1 to 12) are illustrated in the figure. In addition an annex gives the equivalent terms in the Italian language.
- Standard6 pagesEnglish languagesale 15% off
This European Standard defines adhesive backed polymeric film and the performance characteristics of adhesive backed polymeric film for use, on glass, in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to adhesive backed polymeric film that is incorporated into assemblies, e.g. laminated glass or insulating glass units. The additional requirements are specified in the appropriate product standard. Adhesive backed polymeric film, in this case, does not lose its mechanical or thermal characteristics.
- Draft27 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass that has had an adhesive backed polymeric film applied, for use in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC).
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard establishes a nomenclature system for thermoplastic elastomers based on
the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms
used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to
conflict with, but to supplement, existing trade names and trademarks.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 18064:2014 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.
- Standard53 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Report gives recommendations for bioplastics and biopolymers related terminology. These recommendations are based on a discussion of commonly used terms in this field.
This Technical Report also briefly describes the current test methods state of the art in relation to the characterization of bioplastics and products made thereof.
- Technical report13 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.
- Standard53 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.
- Standard53 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 18064:2003 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks.
Thermoplastic-elastomer abbreviated terms that have been used in the past are given in an Annex.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 18064:2003 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks.
Thermoplastic-elastomer abbreviated terms that have been used in the past are given in an Annex.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 18064:2014 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
ISO 8330:2006 defines, in English and in French, terms used in the rubber hose industry.
The standard has been divided into two sections, one for hose terms and the other for hose assembly terms.
- Standard47 pagesEnglish and French languagesale 10% offe-Library read for1 day
Migrated from Progress Sheet (TC Comment) (2000-07-10): Changing of track further to TA (MG) requests - BP (970404) ++ new TC forecast in BP Bli 991026
- Standard234 pagesEnglish languagesale 10% offe-Library read for1 day
Establishes a system of symbols for the basic rubbers in both dry and latex forms, based on the chemical composition of the polymer chain. Standardizes the terms used in industry and commerce and is not intended to come into conflict with existing trade names and trade marks. Replaces the first edition which has been technically revised.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard4 pagesFrench languagesale 15% off
- Standard4 pagesFrench languagesale 15% off