01.040.17 - Metrology and measurement. Physical phenomena (Vocabularies)

IEC 60050-192:2015 gives the general terminology used in the field of dependability. The terms are generic and are applicable to all fields of dependability methodology, including electrotechnical applications. The document is not an exhaustive vocabulary for all IEC standards in the dependability field: definitions for some specialized terms may only be found in the relevant standards. This document replaces sections 1 to 20 of IEC 60050-191:1990, which has been subjected to a systematic, in-de...view more

Provides fundamental definitions for general use in time domain pulse technology. It defines terms for pulse phenomena and characteristics which are prerequisite for efficient communication of technical information. It also defines terms for standards for methods of pulse characteristics measurement, for pulse apparatus, and for apparatus which employ pulse techniques.

This part of ISO 25178 deals with geometrical defects that may be present on the surfaces of material measures and calibration specimens conforming to ISO 5436-1 and ISO 25178-70. It defines classes of these geometrical defects, and defines terms for ways of responding to these defects.
This part of ISO 25178 is applicable as follows:
a) to help customers and users of material measures for surface metrology specify their nominal features (ideal geometrical properties) when purchasing them from...view more

This document defines classes of geometrical defects that might be present on the surfaces of material measures and calibration specimens conforming to ISO 5436-1 and ISO 25178-70, and defines terms for ways of responding to these defects.
This document is applicable as follows:
a) to help customers and users of material measures for surface metrology specify their nominal features (ideal geometrical properties) when obtaining them from manufacturers and suppliers;
b) to enable users of mater...view more

This document defines classes of geometrical defects that might be present on the surfaces of material measures and calibration specimens conforming to ISO 5436-1 and ISO 25178-70, and defines terms for ways of responding to these defects. This document is applicable as follows: a) to help customers and users of material measures for surface metrology specify their nominal features (ideal geometrical properties) when obtaining them from manufacturers and suppliers; b) to enable users of material...view more

This document defines terms relating to rotating machinery equipped with active magnetic bearings. NOTE General terms and definitions of mechanical vibration are given in ISO 2041; those relating to balancing are given in ISO 21940-2; those relating to geometric characteristics such as coaxiality, concentricity and runout are explained in ISO 1101.

This document defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring.

IEC 62933-1:2018 defines terms applicable to electrical energy storage (EES) systems including terms necessary for the definition of unit parameters, test methods, planning, installation, safety and environmental issues. This terminology document is applicable to grid-connected systems able to extract electrical energy from an electric power system, store it internally, and inject electrical power to an electric power system. The step for charging and discharging an EES system may comprise an en...view more

IEC 61970-302:2018 specifies a Dynamics package which contains extensions to the CIM to support the exchange of models between software applications that perform analysis of the steady-state stability (small-signal stability) or transient stability of a power system as defined by IEEE/CIGRE Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions. The model descriptions in this standard provide specifications for each type of dynamic ...view more

IEC 62933-1:2018 defines terms applicable to electrical energy storage (EES) systems including terms necessary for the definition of unit parameters, test methods, planning, installation, safety and environmental issues.
This terminology document is applicable to grid-connected systems able to extract electrical energy from an electric power system, store it internally, and inject electrical power to an electric power system. The step for charging and discharging an EES system may comprise an e...view more

This part of IEC 60051 specifies definitions and general requirements for direct acting
indicating analogue electrical measuring instruments and their accessories.
This part applies to direct acting indicating analogue electrical measuring instruments, such
as:
• ammeters and voltmeters;
• wattmeters and varmeters;
• frequency meters of pointer and vibrating-reed types;
• phasemeters, power-factor meters and synchroscopes;
• ohmmeters(impedance meters) and conductance meters;
• multi-fu...view more

ISO 9849:2017 defines terms relating to geodetic field instruments only, e.g. distance meters, levels, theodolites and others, and their essential component parts which are normally used in terrestrial measuring operations of ordnance survey, topographic survey, plane survey and engineering survey. Therefore, terms concerning fields such as the following are not mentioned, for example, photogrammetry, astronomy, hydrographic survey and industrial metrology. Accessories which are not necessary fo...view more

ISO 18405:2017 defines terms and expressions used in the field of underwater acoustics, including natural, biological and anthropogenic (i.e. man-made) sound. It includes the generation, propagation and reception of underwater sound and its scattering, including reflection, in the underwater environment including the seabed (or sea bottom), sea surface and biological organisms. It also includes all aspects of the effects of underwater sound on the underwater environment, humans and aquatic life....view more