03.100.50 - Production. Production management

This document will help the user understand why it is beneficial to carry out an Innovation Management Assessment (IMA), what to assess, how to carry out the IMA, and thus maximize the resulting benefits, which are universally applicable to:
— organizations seeking sustained success in their innovation activities;
— organizations performing IMAs;
— users and other interested parties (e.g. customers, suppliers, partners, funding organizations, universities and public authorities) seeking confi...view more

IEC 62396-8:2020 is intended to provide awareness and guidance with regard to the effects of small particles (that is, protons, electrons, pions and muon fluxes) and single event effects on avionics electronics used in aircraft operating at altitudes up to 60 000 feet (18 300 m). This is an emerging topic and lacks substantive supporting data. This document is intended to help aerospace or ground level electronic equipment manufacturers and designers by providing awareness guidance for this new ...view more

IEC TS 62686-1:2020 is available as IEC TS 62686-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC TS 62686-1:2020 defines the minimum requirements for general purpose "off the shelf" COTS (commercial off-the-shelf) integrated circuits and discrete semiconductors for ADHP (aerospace, defence and high performance) applications. This Technical Specification applies to all components that c...view more

This document provides general guidance on diesel fuel housekeeping. It does not pre-empt national or local regulations but addresses the issues of contamination by water, sediment, inorganic contaminants, or microbial growth that may occur in the supply chain during manufacture, blending, storage and transportation. It does not address contamination by other fuel products nor does it address possible contamination by water or sediment that may occur on-board vehicles. An informative note on veh...view more

This document defines requirements for avoiding the use of counterfeit, recycled and fraudulent components used in the aerospace, defence and high performance (ADHP) industries. It also defines requirements for ADHP industries to maintain their intellectual property (IP) for all of their products and services. The risks associated with purchasing components outside of franchised distributor networks are considered in IEC 62668-2. Although developed for the avionics industry, this document can be...view more

IEC 62668-1:2019 defines requirements for avoiding the use of counterfeit, recycled and fraudulent components used in the aerospace, defence and high performance (ADHP) industries. It also defines requirements for ADHP industries to maintain their intellectual property (IP) for all of their products and services. The risks associated with purchasing components outside of franchised distributor networks are considered in IEC 62668-2. Although developed for the avionics industry, this document can...view more

IEC 62668-2:2019, defines requirements for avoiding the use of counterfeit, recycled and fraudulent components when these components are not purchased from the original component manufacturer (OCM) or are purchased from outside of franchised distributor networks for use in the aerospace, defence and high performance (ADHP) industries. This practice is used, as derogation, only when there are no reasonable or practical alternatives. NOTE: Typically this document is used in conjunction with IEC 62...view more

IEC 62668-1:2019 defines requirements for avoiding the use of counterfeit, recycled and fraudulent components used in the aerospace, defence and high performance (ADHP) industries. It also defines requirements for ADHP industries to maintain their intellectual property (IP) for all of their products and services. The risks associated with purchasing components outside of franchised distributor networks are considered in IEC 62668-2. Although developed for the avionics industry, this document can...view more

IEC TR 63238-1:2019 provides information and a template to create an interface control document (ICD) for any project which includes electronic assemblies, such as electronic circuit card assemblies (CCAs) or electronic devices, connected together. This document proposes electrical signal naming conventions when interfacing electronic assemblies, and an example containing seven signal naming conventions is included. This document supports original equipment manufacturers (OEMs) in the preparatio...view more

IEC 62668-2:2019, defines requirements for avoiding the use of counterfeit, recycled and fraudulent components when these components are not purchased from the original component manufacturer (OCM) or are purchased from outside of franchised distributor networks for use in the aerospace, defence and high performance (ADHP) industries. This practice is used, as derogation, only when there are no reasonable or practical alternatives.
NOTE: Typically this document is used in conjunction with IEC 6...view more

IEC TS 62686-2:2019 defines the minimum requirements for general purpose "off-the-shelf" COTS (commercial off-the-shelf) passive components for aerospace, defence and high performance (ADHP) applications. This document applies to all passive components that can be operated in ADHP applications within the manufacturers’ publicly available data sheet limits in conjunction with IEC TS 62239-1. This document can be used by other high performance and high reliability industries, at their discretion.
...view more

IEC 62239-1:2018 defines the requirements for developing an electronic components management plan (ECMP) to guarantee to customers that all of the electronic components in the equipment of the plan owner are selected and applied in controlled processes compatible with the end application and that the technical requirements detailed in Clause 4 are accomplished. In general, the plan owner of a complete electronic components management plan (ECMP) is the avionics original equipment manufacturer (O...view more

IEC 62239-1:2018 defines the requirements for developing an electronic components management plan (ECMP) to guarantee to customers that all of the electronic components in the equipment of the plan owner are selected and applied in controlled processes compatible with the end application and that the technical requirements detailed in Clause 4 are accomplished. In general, the plan owner of a complete electronic components management plan (ECMP) is the avionics original equipment manufacturer (O...view more

IEC 62239-1:2018 defines the requirements for developing an electronic components management plan (ECMP) to guarantee to customers that all of the electronic components in the equipment of the plan owner are selected and applied in controlled processes compatible with the end application and that the technical requirements detailed in Clause 4 are accomplished. In general, the plan owner of a complete electronic components management plan (ECMP) is the avionics original equipment manufacturer (O...view more

IEC TR 62240-2:2018(E) describes a process and a method for selecting digital semiconductor microcircuits by ensuring that their lifetime is compatible with the requirements of aerospace, defence and high performance (ADHP) applications (generally in connection with functional environments). Methods and guidelines are provided to assess the long term reliability of COTS semiconductor microcircuits in such applications; they mainly apply during the electronic design phase when selecting semicondu...view more

IEC TS 62647-4:2018(E) defines the requirements for replacing solder balls on ball grid array (BGA) component packages in the context of an electronic components management plan (ECMP) for aerospace, defence and high reliability products. The intent of this document is to provide re-balling companies (hereinafter referred to as the re-balling provider) with the administrative and technical requirements to be incorporated within existing processes or for establishing, implementing and maintaining...view more

IEC TR 62240-1:2018 is available as IEC TR 62240-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 62240-1:2018 is a technical report, which provides information when using semiconductor devices in wider temperature ranges than those specified by the device manufacturer. The uprating solutions described herein are considered exceptions, when no reasonable alternatives are availabl...view more

IEC 62396-2:2017(E) aims to provide guidance related to the testing of electronic components for purposes of measuring their susceptibility to single event effects (SEE) induced by neutrons generated by cosmic ray interactions in the Earth’s atmosphere (atmospheric neutrons). Since the testing can be performed in a number of different ways, using different kinds of radiation sources, it also shows how the test data can be used to estimate the SEE rate of electronic components and boards due to a...view more

IEC TR 62396-6:2017 is a technical report which provides information intended to improve the understanding of extreme space weather events; it details the mechanisms and conditions that produce “extreme space weather” (ESW) as a result of a large increase in the activity on the surface of the sun and it discusses the potential radiation environment based on projection of previous recorded ESW.

IEC TR 62396-7:2017 is a technical report which describes a process to account for the effects of atmospheric radiation on electronic equipment. Single event effects (SEE) due to atmospheric radiation are one class of possible failure mechanisms that are addressed in the safety and reliability analyses of electronic equipment and associated functions. This document focuses on electronic components, electronic equipment and associated electronic functions. System level analysis is not addressed i...view more