This European Standard specifies a method for determining the fire resistance of horizontal service ducts and vertical service shafts, which pass through walls or floors and enclose pipes and cables. The test examines the behaviour of ducts and shafts exposed to fire from outside and from inside the duct. This European Standard is intended to be read in conjunction with EN 1363-1.
This European Standard does not examine the risk of fire spread as a result of thermal conduction along the piping ...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      26 pages
      English language
    • e-Library read for
      1 day

This document defines a methodology for determining and assessing the energy efficiency of Waste Water Treatment Plants (WWTP). The methodology aims at describing, in a systematic way, the various steps required to establish the Water Treatment Energy Index (WTEI) of a particular WWTP.
The methodology includes the classification of WWTPs in different types, identification of different stages of treatment, identification of key performance indicators (KPIs), overview of existing energy monitorin...
view more

    • sale 10% off
    • Technical report
      62 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      59 pages
      English language
    • e-Library read for
      1 day

This document provides an overview of technologies that are under development to capture carbon dioxide (CO2) that is generated during cement manufacture. This document is intended to inform users about the different technologies, including the characteristics, the maturity and the boundaries of these technologies. This document is applicable to organizations involved in the cement industry and other stakeholders (e.g. policy makers). This document addresses technologies for CO2 capture that hav...view more

    • sale 15% off
    • Technical report
      19 pages
      French language
    • sale 15% off
    • Draft
      18 pages
      English language
    • sale 15% off
    • Technical report
      18 pages
      English language

This document provides guidance for the design and integration of a safeguarding supportive system (SSS) which is intended to include a mode selection as part of an SRP/CS or to add a layer of personnel authentication and authorization to an IMS designed according to ISO 11161. This document is meant to be used in conjunction with ISO 11161. This document is applicable to the SSS but does not address personnel qualification and competency.

    • sale 15% off
    • Draft
      8 pages
      English language
    • sale 15% off
    • Technical report
      8 pages
      English language

This document specifies the material, mechanical and functional (fitness for purpose) requirements for warning devices with visual characteristics manufactured from plastics, intended to indicate the presence of cables and piping systems buried in ground when opening trenches and more generally during digging work.
This document also specifies the test methods referred to in this document.
This document is applicable to two types of visual warning devices: tapes (type 1) and meshes (type 2).

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for the determination of certain cyclic volatile methylsiloxanes (cVMS) in environmental water samples with low density polyethylene (LDPE) as a preservative and subsequent liquid-liquid extraction with hexane containing 13C-labeled cVMS as internal standards. The extract is then analysed by gas chromatography-mass spectrometry (GC-MS). NOTE Using the 13C-labeled, chemically identical substances as internal standards with the same properties as the corresponding ...view more

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Draft
      17 pages
      English language
    • sale 15% off
    • Draft
      15 pages
      English language

This European Standard specifies analysis and evaluation procedures for determining self-ignition temperatures (TSI) of combustible dusts or granular materials as a function of volume by hot storage experiments in ovens of constant temperature. The specified test method is applicable to any solid material for which the linear correlation of lg (V/A) versus the reciprocal self-ignition temperature 1/TSI (with TSI in K) holds (i.e. not limited to only oxidatively unstable materials).
This Europea...
view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      34 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      34 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day

This document provides assistance to the designer/manufacturer of machinery and related components as to how the system of existing type-A, type-B and type-C machinery safety standards should be applied in order to design a machine to achieve a level of tolerable risk by adequate risk reduction. This document explains the general principles of ISO 12100 and how this type-A standard is used for practical cases in conjunction with type-B and type-C machinery safety standards. This document provide...view more

    • sale 15% off
    • Technical report
      16 pages
      English language
    • sale 15% off
    • Draft
      16 pages
      English language

This document specifies a noise test code for determining, efficiently and under standardized conditions, the common noise emission characteristics of portable, hand-held, combustion engine powered forest and garden machines, and specific requirements for chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden blowers/vacuums/knapsack mist blowers. Noise emission characteristics include the A-weighted emission sound pressure level at the operato...view more

    • sale 15% off
    • Standard
      37 pages
      French language
    • sale 15% off
    • Standard
      37 pages
      English language

This document addresses how artificial intelligence machine learning can impact the safety of machinery and machinery systems. This document describes how hazards being associated with artificial intelligence (AI) applications machine learning in machinery or machinery systems, and designed to act within specific limits, can be considered in the risk assessment process. This document is not applicable to machinery or machinery systems with AI applications machine learning designed to act beyond ...view more

    • sale 15% off
    • Draft
      6 pages
      English language
    • sale 15% off
    • Technical report
      6 pages
      English language

This document assesses the utility of physical fire models that have been standardized, are commonly used, and/or are cited in national or international standards, for generating fire effluent toxicity data of known accuracy. This is achieved by using the criteria established in ISO 16312-1 and the guidelines established in ISO 19706. The aspects of the models that are considered are: the intended application of the model, the combustion principles it manifests, the fire stage(s) that the model ...view more

    • sale 15% off
    • Draft
      44 pages
      English language
    • sale 15% off
    • Technical report
      45 pages
      English language

This European Standard specifies requirements and gives recommendations for the design, installation, inspection and maintenance of fixed land based water mist systems.
This document is intended to apply to water mist automatic nozzle systems and water mist deluge systems supplied by stand alone or pumped systems.
Aspects of water mist associated with explosion protection are not covered by this European Standard.
This standard does not cover all legislative requirements. In certain countries...
view more

    • sale 10% off
    • Standard
      99 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      63 pages
      English language
    • e-Library read for
      1 day

IEC TS 63058:2021 provides guidance to manufacturers of low-voltage switchgear and controlgear and their assemblies in evaluating and improving the environmental impact of their products, and in enabling effective communication using common references for environmental information throughout the supply chain.

    • sale 15% off
    • Technical specification
      112 pages
      English and French language

IEC TR 62222:2021 describes the test methods for various parameters relating to the reaction to fire properties of metallic and optical fibre communications cables. The parameters have particular importance for cables intended to be installed within buildings and other structures. This document also maps the test methods and associated limits applied to the fire hazards created by particular installation conditions and which can be referenced by other international, regional and national standar...view more

    • sale 15% off
    • Technical report
      45 pages
      English language

This document focuses on monitoring the activity concentrations of radioactive gases. They allow the calculation of the activity releases, in the gaseous effluent discharge from facilities producing positron emitting radionuclides and radiopharmaceuticals. Such facilities produce short-lived radionuclides used for medical purposes or research and can release gases typically including, but not limited to 18F, 11C, 15O and 13N. These facilities include accelerators, radiopharmacies, hospitals and ...view more

    • sale 15% off
    • Standard
      59 pages
      French language
    • sale 15% off
    • Standard
      54 pages
      English language
    • sale 15% off
    • Draft
      59 pages
      French language
    • sale 15% off
    • Draft
      54 pages
      English language
    • sale 15% off
    • Draft
      64 pages
      French language
    • sale 15% off
    • Draft
      62 pages
      English language

ISO/TR 22100-2:2013 describes the general relationship between ISO 12100 and ISO 13849‑1 used to reduce the risk of harm. It focuses on the use of safety-related parts of control systems in relation to risk assessment and the risk reduction process.

    • sale 10% off
    • Technical report
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Technical report
      6 pages
      English language

This International Standard specifies the requirements and test methods for their verification for inspection in use for aerial fixed wing and rotary aircraft spray systems for agriculture, horticulture forestry and human health, with respect to minimizing the risk of environmental.
This part of ISO 16122 relates mainly to the condition of the equipment with respect to its potential risk for the environment and its performance to achieve good applications.
NOTE: Requirements for the protection...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      14 pages
      English language
    • e-Library read for
      1 day

This document gives machine manufacturers guidance on potential security aspects in relation to safety of machinery when putting a machine into service or placing on the market for the first time. It provides essential information to identify and address IT-security threats which can influence safety of machinery.
This document gives guidance but does not provide detailed specifications on how to address IT-security aspects which can influence safety of machinery.
This document does not addres...
view more

    • sale 10% off
    • Technical report
      23 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62832 specifies rules of the Digital Factory framework for managing information
of a production system throughout its life cycle. It also defines how information will be added,
deleted or changed in the DigitalFactory by the various activities during the life cycle of the
production system.
These rules include:
– rules to represent a production system with a DigitalFactory;
– rules to represent a PS asset or a role with a DFasset;
– rules to represent a relationship betwe...
view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      28 pages
      English language
    • e-Library read for
      1 day

This document provides a context for emergency planning, response and recovery for all types of an archive, library or museum collections in light of other existing plans. It provides responders and other stakeholders with an outline for planning, responding and recovering. This document does not address the causes of a critical event, but the consequences and wider impacts. This document outlines a cycle for developing, exercising and reviewing a plan, and how to present a plan. It aims to enco...view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      64 pages
      French language
    • sale 15% off
    • Standard
      59 pages
      English language
    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

This document provides a framework and consistent terminology for specifying user requirements. It specifies the common industry format (CIF) for a user requirement specification including the content elements and the format for stating those requirements.
NOTE 1 A user requirements specification is the formal documentation of a set of user requirements, which aids in the development and evaluation of usable interactive systems.
In this document, user requirements refers to:
a) user-system in...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

The purpose of this document is to allow users to evaluate bulk materials with regard to the
amount of fine fraction of potentially hazardous substances, especially crystalline silica. This Part
1 describes the requirements and choice of test method. It provides the user with guidance on
how to select the method as well as the preparation of the sample and determination of
crystalline silica by XRD and FTIR.
This document is applicable for bulk materials that contain particles in the size r...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      23 pages
      English language
    • e-Library read for
      1 day

The purpose of this document is to allow users to determine the fine fraction with the calculation
method. It also describes the assumptions and preconditions to be met in order for this method
to be valid. This calculation method is applicable only after experiments have shown that the
results are accurate and consistently equal or higher than the results from sedimentation, as
described in Part 2, for that particular bulk material.
For preparation of the sample and determination of crysta...
view more

    • sale 10% off
    • Standard
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      37 pages
      English language
    • e-Library read for
      1 day

The purpose of this document is to allow users to determine a sizeweighted fine fraction by the
sedimentation method. The method in this part uses a liquid sedimentation technique to
separate the fine fraction, which is then analysed for its substance of interest, e.g. crystalline
silica.
Informative annexes within this document describe specific methods for the evaluation of FF for
specific bulk materials.
This document is applicable for bulk materials that contain particles in the size r...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      13 pages
      English language
    • e-Library read for
      1 day

2020-07-20 JF: Through the decision C132/2020 taken on 2020-07-08, the CEN Technical Board approved the revised Annex ZA and therefore, the European Amendment, of EN ISO 19085-10:2019. European amendment is under publication.

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

Standardisation Request M/543 requires the following: "Definition of parameters and methods relevant for assessing durability, upgradability and ability to repair, re-use and re-manufacture of products". Hence, this Technical Report "Definitions related to material efficiency" will constitute a collection of common terms used in deliverables prepared in accordance with M/543. The purpose of such a collection is to provide a single definition of key terms used in different deliverables from the C...view more

    • sale 10% off
    • Technical report
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for the performance and testing of supplied breathable gas respiratory protective devices (RPD) in accordance with their classification and for use in the workplace to protect the wearer from hazardous atmospheres and/or environments.

    • sale 15% off
    • Standard
      79 pages
      French language
    • sale 15% off
    • Standard
      73 pages
      English language
    • sale 15% off
    • Draft
      73 pages
      English language
    • sale 15% off
    • Draft
      83 pages
      French language
    • sale 15% off
    • Draft
      78 pages
      English language

This document specifies general requirements for the performance and testing of respiratory protective devices (RPD) in accordance with their classification and for use in the workplace to protect the wearer from hazardous atmospheres and/or environments. The requirements are based on human factors and are for complete respiratory systems. Requirements for marking and information supplied by the RPD manufacturer are also included. Additional requirements for special application such as fire serv...view more

    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Draft
      15 pages
      French language
    • sale 15% off
    • Draft
      13 pages
      French language
    • sale 15% off
    • Draft
      12 pages
      English language
    • sale 15% off
    • Draft
      12 pages
      English language

The European Air Quality Directive (Directive on ambient air quality and cleaner air for Europe) identifies different uses for modelling: Assessment, planning, forecast and source apportionment (SA). This CEN/TS addresses source apportionment modelling and specifies performance tests to check whether given criteria for receptor oriented source apportionment (RM) are met. The scope of the tests set out in this CEN/TS is performance assessment of SA of particulate matter using RM in the context of...view more

    • sale 10% off
    • Technical specification
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or ma...
view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day

This document describes a methodology for reducing the overall environmental impact through product design and development that is tailored to mechanical products as defined in 3.1.
This methodology is particularly well suited to the redesign of an existing product; it can also be applied for the design of a new product provided the necessary assumptions regarding a (virtual) reference product are taken.
It addresses companies which have decided to integrate an ecodesign approach to optimise...
view more

    • sale 10% off
    • Standard
      87 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      85 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for the performance and testing of filtering respiratory protective devices (RPD) in accordance with their classification and for use in the workplace to protect the wearer from hazardous atmospheres and/or environments. Requirements for RPD elements and components are also specified in this document.

    • sale 15% off
    • Standard
      76 pages
      English language
    • sale 15% off
    • Standard
      84 pages
      French language
    • sale 15% off
    • Draft
      84 pages
      French language
    • sale 15% off
    • Draft
      82 pages
      French language
    • sale 15% off
    • Draft
      76 pages
      English language
    • sale 15% off
    • Draft
      78 pages
      English language

This European Standard specifies the safety requirements for the design, manufacture and information for the safe use of compactors that compact waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials.
This European Standard applies to:
-   compactors using a horizontally moving screw, pendulum or plate as compacting part and where the materials move horizontally; and
-   compactors that are mechanically fed and/or...
view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

These international guidelines are based on the assumption that monitoring of environmental components (atmosphere, water, soil and biota) as well as food quality ensure the protection of human health[2][4][5][6][7][8]. The guidelines constitute a basis for the setting of national regulations and standards, inter alia, for monitoring air, water and food in support of public health, specifically to protect the public from ionizing radiation. This document provides — guidance to collect data neede...view more

    • sale 15% off
    • Standard
      30 pages
      English language
    • sale 15% off
    • Draft
      30 pages
      English language
    • sale 15% off
    • Draft
      28 pages
      English language

This document provides guidelines to organizations for establishing the basic elements, strategies and processes for preventing and reducing crime and the fear of crime at a new or existing built environment. It recommends the establishment of countermeasures and actions to treat crime and security risks in an effective and efficient manner by leveraging environmental design. Within this document, the term "security" is used in a broad manner to include all crime, safety and security-specific ap...view more

    • sale 15% off
    • Standard
      25 pages
      French language
    • sale 15% off
    • Draft
      30 pages
      French language
    • sale 15% off
    • Standard
      23 pages
      English language
    • sale 15% off
    • Draft
      23 pages
      English language
    • sale 15% off
    • Draft
      25 pages
      English language

This document covers the general design, minimum performance requirements and methods of test for wildland firefighting footwear. This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, ISO 18639 series PPE for firefighters undertaking specific rescue activities or for use where a reflective outer surface is required (see ISO 15538). Activities in support of wildland firefighting, such as the cut...view more

    • sale 15% off
    • Standard
      23 pages
      English language
    • sale 15% off
    • Draft
      24 pages
      English language
    • sale 15% off
    • Draft
      24 pages
      English language

This document provides guidance for calculating the CO2 intensity at steel plants with all types of process routes, by defining the boundary, CO2 emission factors and the intermediate products for which upstream emissions are considered for all types of process routes. In particular, this document provides guidance applicable to the ISO 14404 series to the types of steel plants listed below. This document also includes the Universal Calculation Sheet, which covers all relevant emission sources f...view more

    • sale 15% off
    • Standard
      40 pages
      English language
    • sale 15% off
    • Draft
      40 pages
      English language
    • sale 15% off
    • Draft
      36 pages
      English language

This document gives guidelines for assisting organizations in establishing, documenting, implementing, maintaining and continually improving material circulation in their design and development in a systematic manner, using an environmental management system (EMS) framework. These guidelines are intended to be used by those organizations that implement an EMS in accordance with ISO 14001. The guidelines can also help in integrating material circulation strategies in design and development when u...view more

    • sale 15% off
    • Standard
      48 pages
      French language
    • sale 15% off
    • Standard
      44 pages
      English language
    • sale 15% off
    • Draft
      44 pages
      English language
    • sale 15% off
    • Draft
      48 pages
      French language
    • sale 15% off
    • Draft
      47 pages
      French language
    • sale 15% off
    • Draft
      43 pages
      English language

This document provides both general and specific ergonomic requirements and recommendations for accessible tactile/haptic interactive systems, including accessible tactile/haptic interactions. This document provides guidance for increasing the accessibility of interactive systems making use of tactile/haptic input/output modalities such as gestures, vibration, and force feedback. The guidance provided also supports alternative input modalities and the use of different output representations. Thi...view more

    • sale 15% off
    • Draft
      21 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Draft
      18 pages
      English language

This European Standard EN 13819-1 specifies physical test methods for hearing protectors. The purpose of these tests is to enable assessment of the performance of the hearing protector as specified in the appropriate product standard.

    • sale 10% off
    • Standard
      52 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      51 pages
      English language
    • e-Library read for
      1 day

Modification of annex ZA and addition of an European informative annex

    • sale 10% off
    • Amendment
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      7 pages
      English language
    • e-Library read for
      1 day

This European Standard EN 13819-2 specifies acoustic test methods for hearing protectors. The purpose of these tests is to enable assessment of the performance of the hearing protector as specified in the appropriate product standard.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      13 pages
      English language
    • e-Library read for
      1 day

This standard specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions.

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This document gives guidelines for organizations on how to manage the risks arising from COVID-19 to protect work-related health, safety and well-being. This document is applicable to organizations of all sizes and sectors, including those that: a) have been operating throughout the pandemic; b) are resuming or planning to resume operations following full or partial closure; c) are re-occupying workplaces that have been fully or partially closed; d) are new and planning to operate for the first ...view more

    • sale 15% off
    • Technical specification
      36 pages
      English language

This document specifies a system for sampling procedures for testing plastics waste and recyclates which take into account the specifics of the plastics waste and recyclates. It is intended to cover all stages of the plastic recycling process.
The sampling procedures include the statistical specifics of the plastic waste and the behaviour of recyclates.
The sampling method is expected to produce a representative testing sample. Differences can arise due to:
-   the mixture of plastics;
-   the o...
view more

    • sale 10% off
    • Technical specification
      20 pages
      English language
    • e-Library read for
      1 day