This document specifies a method for the determination of the ultimate anoxic biodegradability of plastics made of organic compounds, where the amount of the produced nitrogen and carbon dioxide at the end of the test is measured.
The test substance is exposed to an inoculum stemming from the denitrification tank of a wastewater treatment plant. Testing is performed under defined laboratory conditions.

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This document is used in the framework of the waste processing industry and defines the processing of relevant information for the deposit of garbage between access chips and the collection container systems.
This document is not intended to be used for container identification.
NOTE The container identification is covered by EN 14803.
This document provides the technical specification and the restrictions that are defined on top of the ISO 14443 series (Parts 1, 2 and 3).

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document summarizes methods for the determination of the parameters pH, ammonium, AOX, As, Ba, Cd, Cl-, easily liberatable cyanide, Co, Cr, Cr(VI), Cu, DOC/TOC, electrical conductivity, F-, Hg, Mo, Ni, NO2-, Pb, phenol index, total S, Sb, Se, SO42-, TDS, V and Zn in aqueous eluates for the characterization of waste.

    • sale 10% off
    • Technical report
      37 pages
      English language
    • e-Library read for
      1 day

This document defines the primary space debris mitigation requirements applicable to all elements of systems launched into, or passing through, near-Earth space, including launch vehicle orbital stages, operating spacecraft and any objects released as part of normal operations or disposal actions.
The requirements contained in this document are intended to reduce the growth of space debris by ensuring that spacecraft and launch vehicle orbital stages are designed, operated and disposed of in a ...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for determining the ultimate aerobic biodegradability of plastic
materials under controlled composting conditions by gravimetric measurement of the amount of carbon
dioxide evolved. The method is designed to yield an optimum rate of biodegradation by adjusting the
humidity, aeration and temperature of the composting vessel.
The method applies to the following materials:
— natural and/or synthetic polymers and copolymers, and mixtures of these;
— plastic mat...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.

    • sale 10% off
    • Technical report
      17 pages
      English language
    • e-Library read for
      1 day

This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.

    • sale 10% off
    • Technical report
      17 pages
      English language
    • e-Library read for
      1 day

This clause of part 1 is replaced with the following:
This European Standard is applicable to the treatment of photovoltaic panels as mentioned in the WEEE Directive under Annex 4.
The scope of this document is limited to photovoltaic panels with a minimum surface area of 0,2 m2.
This European Standard applies to the treatment of photovoltaic panels until end-of-waste status is fulfilled, or photovoltaic panel fractions are recycled, recovered or disposed.
This European Standard addresses al...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

Clause 1 is replaced with the following:
This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for photovoltaic panels, FprEN 50625-2-4 and Technical Specification for de-pollution - General CLC/TS 50625-3-1:2015.

    • sale 10% off
    • Technical specification
      16 pages
      English language
    • e-Library read for
      1 day

This clause of part 1 is replaced with the following: This European Standard is applicable to the treatment of photovoltaic panels as mentioned in the WEEE Directive under Annex 4. The scope of this document is limited to photovoltaic panels with a minimum surface area of 0,2 m2. This European Standard applies to the treatment of photovoltaic panels until end-of-waste status is fulfilled, or photovoltaic panel fractions are recycled, recovered or disposed. This European Standard addresses all op...view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

Clause 1 is replaced with the following: This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for photovoltaic panels, FprEN 50625-2-4 and Technical Specification for de-pollution - General CLC/TS 50625-3-1:2015.

    • sale 10% off
    • Technical specification
      16 pages
      English language
    • e-Library read for
      1 day

Clause 1 of CLC/TS 50625-3-1:2015 is replaced with the following:
This European Technical Specification is intended to be used in conjunction with CLC/TS 50625-3-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements, EN 50625 1, Collection, logistics and Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays, EN 50625-2-2 and Collection, logistics and treatment requirements for WEEE - Par...
view more

    • sale 10% off
    • Technical specification
      34 pages
      English language
    • e-Library read for
      1 day

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for temperature exchange equipment, EN 50625-2-3, and the Technical Specification for de-pollution, CLC/TS 50625 3-1.

    • sale 10% off
    • Technical specification
      60 pages
      English language
    • e-Library read for
      1 day

This Technical Specification addresses the processes regarding the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE.
NOTE 1   For the treatment of WEEE EN 50625-1 applies.
This Technical Specification relates to the chemical and metallurgical processes used for the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE, thereby differentiating it from manual/mechanical processing (see Annex A).
All chemical and metallurgical processe...
view more

    • sale 10% off
    • Technical specification
      24 pages
      English language
    • e-Library read for
      1 day

This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility.
This Technical Specification addresses all operators that perform collection and logistics operations.
This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at col...
view more

    • sale 10% off
    • Technical specification
      17 pages
      English language
    • e-Library read for
      1 day

Clause 1 of CLC/TS 50625-3-1:2015 is replaced with the following: This European Technical Specification is intended to be used in conjunction with CLC/TS 50625-3-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements, EN 50625 1, Collection, logistics and Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays, EN 50625-2-2 and Collection, logistics and treatment requirements for WEEE - Part...view more

    • sale 10% off
    • Technical specification
      34 pages
      English language
    • e-Library read for
      1 day

This Technical Specification addresses the processes regarding the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE. NOTE 1 For the treatment of WEEE EN 50625-1 applies. This Technical Specification relates to the chemical and metallurgical processes used for the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE, thereby differentiating it from manual/mechanical processing (see Annex A). All chemical and metallurgical processes a...view more

    • sale 10% off
    • Technical specification
      24 pages
      English language
    • e-Library read for
      1 day

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for temperature exchange equipment, EN 50625-2-3, and the Technical Specification for de-pollution, CLC/TS 50625 3-1.

    • sale 10% off
    • Technical specification
      60 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to the treatment of waste temperature exchange equipment and other WEEE containing VFC or VHC in refrigerants or blowing agents. This European Standard applies to the treatment of temperature exchange equipment until end-of-waste status is fulfilled, or temperature exchange equipment fractions are recycled, recovered, or disposed of. This European Standard addresses all operators involved in the treatment including related handling, sorting and storage of tem...view more

    • sale 10% off
    • Standard
      46 pages
      English language
    • e-Library read for
      1 day

This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility. This Technical Specification addresses all operators that perform collection and logistics operations. This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at collection...view more

    • sale 10% off
    • Technical specification
      17 pages
      English language
    • e-Library read for
      1 day

This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for lamps, EN 50625-2-1, and the Technical Specification CLC/TS 50625-3-1:2014 for de-pollution - General.

    • sale 10% off
    • Technical specification
      20 pages
      English language
    • e-Library read for
      1 day

This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for lamps, EN 50625-2-1, and the Technical Specification CLC/TS 50625-3-1:2014 for de-pollution - General.

    • sale 10% off
    • Technical specification
      20 pages
      English language
    • e-Library read for
      1 day

This European standard is applicable to the treatments of WEEE containing CRTs and flat panel
displays.
This European standard applies to the treatment of WEEE containing CRTs and flat panel displays
until end-of-waste status is fulfilled, or fractions are recycled, recovered, or disposed of.
This European standard addresses all operators involved in the treatment including related handling,
sorting, and storage.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard EN 50625-1 for most types of WEEE (other documents will be developed to define requirements for specific WEEE requiring more specialised treatment).

    • sale 10% off
    • Technical specification
      27 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following: This European standard is applicable to the treatments of WEEE containing CRTs and flat panel displays. This European standard applies to the treatment of WEEE containing CRTs and flat panel displays until end-of-waste status is fulfilled, or fractions are recycled, recovered, or disposed of. This European standard addresses all operators involved in the treatment including related handling, sorting, and storage.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following:
This European standard is applicable to the treatment of lamps.
This European Standard applies to the treatment of lamps until end-of-waste status is ful-filled, or lamp fractions are recycled, recovered, or disposed of.
This European Standard addresses all operators involved in the treatment including related handling, sorting, and storage of lamps. This European Standard applies to all facilities including those whose treatment opera...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard EN 50625-1 for most types of WEEE (other documents will be developed to define requirements for specific WEEE requiring more specialised treatment).

    • sale 10% off
    • Technical specification
      27 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following: This European standard is applicable to the treatment of lamps. This European Standard applies to the treatment of lamps until end-of-waste status is ful-filled, or lamp fractions are recycled, recovered, or disposed of. This European Standard addresses all operators involved in the treatment including related handling, sorting, and storage of lamps. This European Standard applies to all facilities including those whose treatment operations use...view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

EN 50625-1 is applicable to the treatment of waste electrical and electronic equipment (WEEE). This standard will be supplemented, for example by standards covering specific equipment. NOTE This European Standard is intended to cover WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU. This standard applies to the treatment of WEEE until end-of-waste status is fulfilled, or until the WEEE is prepared for re-use, recycled, recovered, or...view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to the treatment of waste electrical and electronic equipment (WEEE). This standard will be supplemented, for example by standards covering specific equipment. NOTE This European Standard is intended to cover WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU. This standard applies to the treatment of WEEE until end-of-waste status is fulfilled, or until the WEEE is prepared for re-use, recycled, r...view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This part of ISO 14855 specifies a method for the determination of the ultimate aerobic biodegradability of plastics, based on organic compounds, under controlled composting conditions by measurement of the amount of carbon dioxide evolved and the degree of disintegration of the plastic at the end of the test. This method is designed to simulate typical aerobic composting conditions for the organic fraction of solid mixed municipal waste. The test material is exposed to an inoculum which is deri...view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

ISO 14855-1:2012 specifies a method for the determination of the ultimate aerobic biodegradability of plastics, based on organic compounds, under controlled composting conditions by measurement of the amount of carbon dioxide evolved and the degree of disintegration of the plastic at the end of the test. This method is designed to simulate typical aerobic composting conditions for the organic fraction of solid mixed municipal waste. The test material is exposed to an inoculum which is derived fr...view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

In the Council Decision of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC, the test methods are described for determining the acceptability of waste at landfills. In section 3 of the annex of this decision the following umbrella European Standards are included for the analysis of eluates:
-   ENV 12506 Analysis of eluates - Determination of pH, As, Ba, Cd, Cl, Co, Cr, Cr(VI), Cu, Mo, Ni,...
view more

    • sale 10% off
    • Technical report
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and procedures to determine the compostability or anaerobic treatability of plastic materials by addressing four characteristics:
I)      biodegradability,
II)      disintegration during biological treatment,
III)      effect on the biological treatment process and
IV)      effect on the quality of the resulting compost.
NOTE   For packaging EN 13432 applies.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for the determination of the ultimate anoxic biodegradation of plastics made of organic compounds, where the amount of the produced nitrogen and carbon dioxide at the end of the test is measured.
The test substance is exposed to an inoculum stemming from the denitrification tank of a wastewater treatment plant. Testing is performed under defined laboratory conditions.
Claims of performance are limited to the numerical result obtained in the test and not used fo...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and procedures to determine the compostability or anaerobic treatability of plastic materials by addressing four characteristics:
I)      biodegradability,
II)      disintegration during biological treatment,
III)      effect on the biological treatment process and
IV)      effect on the quality of the resulting compost.
NOTE   For packaging EN 13432 applies.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and a procedure by which a person or organization responsible for placing packaging or packed product on the market (the supplier) may combine the application of five (mandated) packaging standards and one (mandated) CEN report (in two parts).

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a procedure for assessment of packaging to ensure that the weight and/or volume of its material content is at the minimum commensurate with the maintenance of :
-functionality throughout the supply and user chain ;
-safety and hygiene for both product and user/consumer ;
-acceptability of the packed product to the user/consumer.
This European Standard also specifies the methodology and procedure for determining the presence of the four heavy metals named in a...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for a packaging to be classified as recoverable in the form of energy and sets out procedures for assessment of conformity with those requirements. The scope is limited to factors under the control of the supplier.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a procedure for assessment of packaging to ensure that the weight and/or volume of its material content is at the minimum commensurate with the maintenance of :
-functionality throughout the supply and user chain ;
-safety and hygiene for both product and user/consumer ;
-acceptability of the packed product to the user/consumer.
This European Standard also specifies the methodology and procedure for determining the presence of the four heavy metals named in a...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for a packaging to be classified as recoverable in the form of energy and sets out procedures for assessment of conformity with those requirements. The scope is limited to factors under the control of the supplier.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and a procedure by which a person or organization responsible for placing packaging or packed product on the market (the supplier) may combine the application of five (mandated) packaging standards and one (mandated) CEN report (in two parts).

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a method for the evaluation of the ultimate aerobic biodegradability of packaging materials based on organic compounds under controlled composting conditions by measurement of released carbon dioxide at the end of the test. This method is designed to resemble typical aerobic composting conditions for the organic fraction of mixed municipal solid waste. The packaging material is exposed in a laboratory test to an inoculum which is derived from compost. The aerobic...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This European Standard is used to evaluate the disintegration of packaging materials in a pilot-scale aerobic composting test under defined conditions. Other methods should be used to measure the biodegradability of the packaging materials. Packaging materials are mixed with biowaste and spontaneously composted for 12 weeks in practical oriented composting conditions. At the end of the composting cycle the disintegration is measured by sieving of the compost and the calculation of a mass balance...view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This European Standard is used to evaluate the disintegration of packaging materials in a pilot-scale aerobic composting test under defined conditions. Other methods should be used to measure the biodegradability of the packaging materials. Packaging materials are mixed with biowaste and spontaneously composted for 12 weeks in practical oriented composting conditions. At the end of the composting cycle the disintegration is measured by sieving of the compost and the calculation of a mass balance...view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a method for the evaluation of the ultimate aerobic biodegradability of packaging materials based on organic compounds under controlled composting conditions by measurement of released carbon dioxide at the end of the test. This method is designed to resemble typical aerobic composting conditions for the organic fraction of mixed municipal solid waste. The packaging material is exposed in a laboratory test to an inoculum which is derived from compost. The aerobic...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

The objective of this report is to identify and define properties of packaging and packaging waste to allow optimization of energy recovery.
This report takes a wide approach to the process of energy recovery in order to identify the items to be standardised according to the Directive and the Mandate.

    • sale 10% off
    • Standardization document
      26 pages
      English language
    • e-Library read for
      1 day

The objective of this report is to identify and define properties of packaging and packaging waste to allow optimization of energy recovery.
This report takes a wide approach to the process of energy recovery in order to identify the items to be standardised according to the Directive and the Mandate.

    • sale 10% off
    • Standardization document
      26 pages
      English language
    • e-Library read for
      1 day