13.260 - Protection against electric shock. Live working

IEC 62715-6-3:2020 (E) is to define the standard test methods to evaluate the mechanical robustness of flexible display modules, especially mechanical robustness regarding impact and hardness, which include displays such as liquid crystal displays (LCDs), e-paper, and organic light emitting diode (OLED) displays, against external forces applied to a panel.

This document is applicable to conductive clothing, worn during live working (especially barehand
working) on AC and DC electrical installations, to provide electrical continuity between all
parts of the clothing and a reduction of electric field inside the clothing.
This document is applicable to conductive clothing assembled from a conductive garment
(jackets and trousers or coveralls forming a one-piece garment) and from conductive component
parts (gloves, hoods or helmets, shoes or boot...view more

IEC 62321-10:2020 specifies one normative technique for the determination of polycyclic aromatic hydrocarbons (PAHs) in polymers of electrotechnical products. These PAHs can especially be found in the plastic and rubber parts of a wide range of consumer articles. They are present as impurities in some of the raw materials used in the production of such articles, in particular in extender oils and in carbon black. They are not added intentionally to the articles and do not perform any specific fu...view more

TAN - // IEC Corrigendum

IEC 61482-2 is applicable to protective clothing used in work where there is the risk of exposure to an electric arc hazard. This document specifies requirements and test methods applicable to materials and garments for protective clothing for electrical workers against the thermal hazards of an electric arc. Electric shock hazard is not covered by this document, which is applicable in combination with standards covering such hazards. Other effects than the thermal effects of an electric arc lik...view more

IEC 60895:2020 is applicable to conductive clothing, worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a reduction of electric field inside the clothing.
This document is applicable to conductive clothing assembled from a conductive garment (jackets and trousers or coveralls forming a one-piece garment) and from conductive component parts (gloves, hoods or helmets, shoes or boots,...view more

This document specifies test method procedures to determine the arc rating of flame resistant clothing materials and garments or assemblies of garments intended for use in clothing for workers if there is an electric arc hazard. An open arc under controlled laboratory conditions is used to determine the values of ELIM, ATPV or EBT of materials, garments or assemblies of garments. Other effects than the thermal effects of an electric arc like noise, light emissions, pressure rise, hot oil, electr...view more

Specifies essential requirements regarding protection against electric shock, including basic protection (protection against direct contact) and fault protection (protection against indirect contact) of persons and livestock. It deals also with the application and co-ordination of these requirements in relation to external influences. Requirements are also given for the application of additional protection in certain cases. Has the status of a group safety publication in accordance with IEC Guid...view more

This part of IEC 60050 defines terms specifically relevant to live working. It has the status of a
horizontal standard in accordance with IEC Guide 108, Guidelines for ensuring the coherency
of IEC publications – Application of horizontal standards.
The aim of this IEV part is to provide precise, brief and correct definitions of internationally
accepted concepts in the field of live working, and to name the terms by which these defined
concepts shall be known.
NOTE Complementary terms and ...view more

ISO/TR 22411:2008 presents ergonomics data and guidelines for applying ISO/IEC Guide 71 in addressing the needs of older persons and persons with disabilities in standards development. It provides ergonomics data and knowledge about human abilities - sensory, physical and cognitive - and allergies, as well as guidance on the accessible design of products, services and environments.

Based on IEC corrigendum

IEC 62311:2019 applies to electronic and electrical equipment for which no dedicated product standard or product family standard regarding human exposure to electromagnetic fields applies. It covers equipment with intentional or non-intentional radiators as well as a combination thereof.
This document provides assessment methods and criteria to evaluate equipment against limits on exposure of people related to electric, magnetic and electromagnetic fields. The frequency range covered is from 0 ...view more

IEC/TS 60079-32-1:2013(E) gives guidance about the equipment, product and process properties necessary to avoid ignition and electrostatic shock hazards arising from static electricity as well as the operational requirements needed to ensure safe use of the equipment, product or process. It can be used in a risk assessment of electrostatic hazards or for the preparation of product family or dedicated product standards for electrical or non-electrical machines or equipment. The purpose of this do...view more

2019-09-26 PeC: unflagged for LVD citation, includes modifications
2019-04-10 PeC: corrigendum to EN 60529:1991/A2:2013 which is cited under the LVD

Based on IEC corrigendum

This document is applicable to insulated, insulating and hybrid hand tools used for working
live or close to live parts at nominal voltages up to 1 000 V AC and 1 500 V DC.
The products designed and manufactured according to this document contribute to the safety
of the users provided they are used by skilled persons, in accordance with safe methods of
work and the instructions for use (where appropriate).

TC - Update of EN title; Update of reference in clause 4.4.1; Update of cross-referencing.

NEW!IEC 60900:2018 is available as IEC 60900:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60900:2018 is applicable to insulated, insulating and hybrid hand tools used for working live or close to live parts at nominal voltages up to 1 000 V AC and 1 500 V DC. The products designed and manufactured according to this document contribute to the safety of the users provided they are used ...view more