17.020 - Metrology and measurement in general
Metrology and measurement in general
Metrologie und Me?wesen im allgemeinen
Métrologie et mesurage en général
Meroslovje in merjenje na splošno
General Information
- 1 (current)
- 2
- 3
- 4
- 5
IEC 61010-2-202:2020 is available as IEC 61010-2-202:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-202:2020 constitutes Part 2-202 of a planned series of standards on industrial-process measurement, control and automation equipment. Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in each part. This part incorporates the safety related req...view more
- Standard26 pagesEnglish and French language
sale 15% off
- Amendment7 pagesEnglish language
sale 10% off- e-Library read for1 day
- Amendment4 pagesEnglish language
sale 10% off- e-Library read for1 day
1.1 This document
— specifies basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied;
— provides a practical approach of a basic method for routine use in estimating the bias of measurement methods and laboratory bias;
— provides a brief guidance to all personnel concerned with designing, performing or analysing the results of the measurements for estimating bias.
1.2 It is concerned exclusively with measurement methods wh...view more
- Standard26 pagesEnglish language
sale 15% off- Standard27 pagesFrench language
sale 15% off- Standard31 pagesEnglish language
sale 10% off- e-Library read for1 day
1.1 This document
— amplifies the general principles for designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment;
— provides a detailed practical description of the basic method for routine use in estimating the precision of measurement methods;
— provides guidance to all personnel concerned with designing, performing or analysing the results of the tests for estimating precision.
NOTE Modifications to ...view more
- Standard73 pagesFrench language
sale 15% off- Standard69 pagesEnglish language
sale 15% off- Standard75 pagesEnglish language
sale 10% off- e-Library read for1 day
1.1 This document — specifies basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied; — provides a practical approach of a basic method for routine use in estimating the bias of measurement methods and laboratory bias; — provides a brief guidance to all personnel concerned with designing, performing or analysing the results of the measurements for estimating bias. 1.2 It is concerned exclusively with measurement methods which yi...view more
- Standard26 pagesEnglish language
sale 15% off- Standard27 pagesFrench language
sale 15% off- Standard31 pagesEnglish language
sale 10% off- e-Library read for1 day
1.1 This document — amplifies the general principles for designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment; — provides a detailed practical description of the basic method for routine use in estimating the precision of measurement methods; — provides guidance to all personnel concerned with designing, performing or analysing the results of the tests for estimating precision. NOTE Modifications to this...view more
- Standard73 pagesFrench language
sale 15% off- Standard69 pagesEnglish language
sale 15% off- Standard75 pagesEnglish language
sale 10% off- e-Library read for1 day
This document gives names, symbols, definitions and units for quantities of mechanics. Where
appropriate, conversion factors are also given.
- Standard22 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft27 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 80000-11:2019 gives names, symbols and definitions for characteristic numbers used in the description of transport and transfer phenomena.
- Standard50 pagesEnglish language
sale 15% off
This document presents methods for determining the critical value of the response variable and the minimum detectable value in Poisson distribution measurements. It is applicable when variations in both the background noise and the signal are describable by the Poisson distribution. The conventional approximation is used to approximate the Poisson distribution by the normal distribution consistent with ISO 11843‑3 and ISO 11843‑4. The accuracy of the normal approximation as compared to the exact...view more
- Standard23 pagesEnglish language
sale 15% off
1.1 This document is concerned with polynomial calibration functions that describe the relationship between a stimulus variable and a response variable. These functions contain parameters estimated from calibration data consisting of a set of pairs of stimulus value and response value. Various cases are considered relating to the nature of any uncertainties associated with the data. 1.2 Estimates of the polynomial function parameters are determined using least‐squares methods, taking account of ...view more
- Technical specification52 pagesEnglish language
sale 15% off
Background noise exists ubiquitously in analytical instruments, whether or not a sample is applied to the instrument. This document is concerned with mathematical methodologies for estimating the minimum detectable value in case that the most predominant source of measurement uncertainty is background noise. The minimum detectable value can directly and mathematically be derived from the stochastic characteristics of the background noise. This document specifies basic methods to — extract the st...view more
- Standard18 pagesEnglish language
sale 15% off
NEW!IEC 61010-2-201:2017 is available as IEC 61010-2-201:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-201:2017 specifies safety requirements and related verification tests for any product performing the function of control equipment and/or their associated peripherals. In addition, these products have as their intended use the command and control of machines, automated manufac...view more
- Standard78 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard78 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 18674-3 applies to the measurement of displacements across a measuring line by means
of inclinometers carried out for geotechnical monitoring.
ISO 18674-3 also refers to deflectometers (see Annex B) to supplement inclinometers for the
determination of horizontal displacements across horizontal measuring lines.
- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62828-1:2017 establishes a general framework for defining reference conditions and test procedures applicable to all types of industrial and process measurement transmitters (PMTs) used in measuring and control systems for industrial process and machinery. These reference test conditions are divided into “standard reference conditions”, which apply when determining the accuracy of measurement, and “ambient and process reference conditions”, which are used to assess the influence of external ...view more
- Standard89 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard89 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62828-1:2017 establishes a general framework for defining reference conditions and test procedures applicable to all types of industrial and process measurement transmitters (PMTs) used in measuring and control systems for industrial process and machinery. These reference test conditions are divided into “standard reference conditions”, which apply when determining the accuracy of measurement, and “ambient and process reference conditions”, which are used to assess the influence of external ...view more
- Standard176 pagesEnglish and French language
sale 15% off
This document gives guidance for
— evaluation of measurement uncertainties using data obtained from studies conducted in accordance
with ISO 5725-2, and
— comparison of collaborative study results with measurement uncertainty (MU) obtained using
formal principles of uncertainty propagation (see Clause 14).
ISO 5725-3 provides additional models for studies of intermediate precision. However, while the same
general approach may be applied to the use of such extended models, uncertainty evalu...view more
- Standard40 pagesFrench language
sale 15% off- Standard38 pagesEnglish language
sale 15% off- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard1 pageEnglish language
sale 15% off- Standard1 pageFrench language
sale 15% off
ISO 21748:2017 gives guidance for - evaluation of measurement uncertainties using data obtained from studies conducted in accordance with ISO 5725‑2, and - comparison of collaborative study results with measurement uncertainty (MU) obtained using formal principles of uncertainty propagation (see Clause 14). ISO 5725‑3 provides additional models for studies of intermediate precision. However, while the same general approach may be applied to the use of such extended models, uncertainty evaluation...view more
- Standard40 pagesFrench language
sale 15% off- Standard38 pagesEnglish language
sale 15% off- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 61010-2-202:2016 specifies the safety requirements for electric ACTUATORs and SOLENOIDs, as applied to valves, intended to be installed in an industrial process or discrete control environment. This publication is to be read in conjunction with IEC 61010-1:2010.
- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 61010-2-201:2017 is also available as IEC 61010-2-201:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61010-2-201:2017 specifies safety requirements and related verification tests for any product performing the function of control equipment and/or their associated peripherals. In addition, these products have as their intended use the command and control of machines, automated ma...view more
- Standard156 pagesEnglish and French language
sale 15% off
- 1 (current)
- 2
- 3
- 4
- 5