21.260 - Lubrication systems

ISO 3547-3:2017 specifies dimensions of lubrication holes, grooves and bore indentations on wrapped bushes made of mono and multi-layer bearing material for plain bearing applications.
NOTE Wrapped bushes with lubrication holes, grooves or bore indentations in accordance with this document can be ordered with dimensions in accordance with ISO 3547‑1 and made from materials in accordance with ISO 3547‑4.

ISO 4378-3:2017 specifies the most commonly used terms relating to lubrication of plain bearings with their definitions and classification.
For some terms and word combinations, their short forms are given, which can be used where they are unambiguous. Self-explanatory terms are given without definitions.

This document is limited to specifying the requirements when applying lubricants to the wheel-rail interface between the wheel flange and the rail gauge corner (active interface) either directly or indirectly to the wheel flange or to the rail, and includes both trainborne and trackside solutions.
This document defines:
- the characteristics that systems of lubrication of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verific...view more

This document is limited to specifying the requirements when applying lubricants to the wheel-rail interface between the wheel flange and the rail gauge corner (active interface) either directly or indirectly to the wheel flange or to the rail, and includes both trainborne and trackside solutions.
This document defines:
-   the characteristics that systems of lubrication of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verific...view more

IEC 61988-2-3:2009 determines the measuring methods for defects and degradation of colour plasma display (PDP) module in the following areas: a) cell defects; b) image sticking; c) luminance.

This Technical Report is designed to provide currently available technical information with respect to the lubrication of industrial gear drives up to pitch line velocities of 30 m/s. It is intended to serve as a general guideline and source of information about the different types of gear, and lubricants, and their selection for gearbox design and service conditions. This Technical Report is addressed to gear manufacturers, gearbox users and gearbox service personnel, inclusive of manufacturers...view more

This International Standard specifies dimensions for lubrication holes, grooves and pockets for bearing bushes.
These dimensions can be entered, e.g. on drawings, using the designation examples. Their use depends in
particular on the specific operating conditions.
In addition, it enables the user to assign the different types of lubricant feed and distribution to plain bearing bushes
made of copper alloys, thermosetting plastics, thermoplastics or of artificial carbon.
NOTE Different types ...view more

This European standard specifies the requirements when applying lubricant to the interface between the wheel flange and the rail (active interface) either directly or indirectly to the wheel flange or to the rail and includes both trainborne and trackside solutions.
This standard only covers the equipment and application of lubricant to the active interface.
This document defines:
- the characteristics that systems of lubrication of the wheel-rail interface shall achieve, together with appli...view more

This European Standard specifies the requirements of lubricants intended for lubrication of the active interface (wheel flange and the gauge face of the rail/ back of wheel and check rail).
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the lubricant.

This European standard specifies the requirements when applying material to the active interface between the wheel tread and the crown of the rail and includes trainborne and track side equipment.
This technical specification only covers the equipment and application of material to the active interface.
This document defines:
- the characteristics that systems of top of rail equipment for wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried ou...view more

This document is limited to specifying the requirements when applying lubricants to the wheel-rail interface between the wheel flange and the rail gauge corner (active interface) either directly or indirectly to the wheel flange or to the rail, and includes both trainborne and trackside solutions.
This document defines:
-   the characteristics that systems of lubrication of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verific...view more

This document is limited to specifying the requirements when applying material to the active interface between the wheel tread and the crown of the rail and includes trainborne and track side equipment.
This document only covers the equipment and application of material to the active interface.
This document defines:
-   the characteristics that systems of top of rail equipment for wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for ver...view more

This European standard specifies the requirements when applying lubricant to the interface between the wheel flange and the rail (active interface) either directly or indirectly to the wheel flange or to the rail and includes both trainborne and trackside solutions.
This standard only covers the equipment and application of lubricant to the active interface.
This document defines:
- the characteristics that systems of lubrication of the wheel-rail interface shall achieve, together with appli...view more

This document is limited to specifying the requirements when applying lubricants to the wheel-rail interface between the wheel flange and the rail gauge corner (active interface) either directly or indirectly to the wheel flange or to the rail, and includes both trainborne and trackside solutions.
This document defines:
-   the characteristics that systems of lubrication of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verific...view more