23.120 - Ventilators. Fans. Air-conditioners

This document deals with the likely degradation of air performance of fans tested in standardized airways in accordance with ISO 5801 when compared with the performance of fans tested under actual site conditions. It deals with the performance of a number of generic types of fan and fittings. The results given are intended as guidelines and only provide trends, as the system effect depends on the exact geometry of the fan and disturbing component. The test data presented in this document are tak...view more

This part of IEC 63086 applies to electrically powered household and similar air cleaners
intended for use on rated single-phase AC input voltage circuits not exceeding 250 V and DC
input voltage circuits not exceeding 48 V.
NOTE 1 See Clause 4 for examples of different technologies and placements of household and similar air cleaners.
NOTE 2 If the test methods in this document are applied to combination products (air conditioners, humidifiers,
dehumidifiers, heaters, etc.) with air cleani...view more

IEC 63086-1:2020 applies to electrically powered household and similar air cleaners intended for use on rated single-phase AC input voltage circuits not exceeding 250 V and DC input voltage circuits not exceeding 48 V.
If the test methods in this document are applied to combination products (air conditioners, humidifiers, dehumidifiers, heaters, etc.) with air cleaning function, they are only aimed at their air cleaning function when tested.
Battery-operated appliances are within the scope of ...view more

IEC 60704-2-7 applies to electrical fans (including their accessories and their componentparts) for household and similar use, designed for AC or DC supply.The motor, the impeller and their housing, if any, form a single unit.These particular requirements apply to:- conventional fans,- table fans,- pedestal fans,- ceiling fans,- bladeless fans,- wall bracket fans,- ceiling bracket fans,- louver fans,- tower fans,- ventilating and partition ventilating fans.This standard does not apply to:- fans ...view more

IEC 60704-2-7:2020 is available as IEC 60704-2-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60704-2-7:2020 applies to electrical fans (including their accessories and their component parts) for household and similar use, designed for AC or DC supply. The motor, the impeller and their housing, if any, form a single unit. These particular requirements apply to: – conventional fans, –...view more

IEC 60704-2-7:2020 is available as IEC 60704-2-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60704-2-7:2020 applies to electrical fans (including their accessories and their component parts) for household and similar use, designed for AC or DC supply. The motor, the impeller and their housing, if any, form a single unit. These particular requirements apply to:
– conventional fans...view more

This Standard establishes only the vocabulary of fork arms and load handling attachments. This document gives no safety requirements of fork arms and load handling attachments. For the purpose of this document, the term attachment describes a device that is mounted to an industrial truck to allow an alternative way to use the lifting system.

This document establishes a system for the classification of fan efficiency for all fan types driven by motors of nominal rating 0,125 kW and above. It applies to driven fans only, but not to the system (finished original equipment manufacturer's product, for example box fans and roof fans or ventilation system) in which they might be installed. This document describes a number of different procedures to classify the efficiency of a fan or to apply a minimum efficiency limit (MEL). Those procedu...view more

This document establishes a system for the classification of fan efficiency for all fan types driven by motors of nominal rating 0,125 kW and above. It applies to driven fans only, but not to the system (finished original equipment manufacturer's product, for example box fans and roof fans or ventilation system) in which they might be installed. This document describes a number of different procedures to classify the efficiency of a fan or to apply a minimum efficiency limit (MEL). Those procedu...view more

ISO 29464:2017 establishes a terminology for the air filtration industry and comprises terms and definitions only.
ISO 29464:2017 is applicable to particulate and gas phase air filters and air cleaners used for the general ventilation of inhabited enclosed spaces. It is also applicable to air inlet filters for static or seaborne rotary machines and UV-C germicidal devices.
It is not applicable to cabin filters for road vehicles or air inlet filters for mobile internal combustion engines for wh...view more

This standard specifies the performance-measuring methods of comfort fans and regulators for household and similar purposes, including conventional fans, tower fans and bladeless fans, their rated voltage being not more than 250 V for single-phase fans and 480 V for other fans, and their rated power input being less than 125 W. Wherever applicable, the term "fan" used in this document includes its associated regulator, if any.

IEC 60879:2019 specifies the performance-measuring methods of comfort fans and regulators for household and similar purposes, including conventional fans, tower fans and bladeless fans, their rated voltage being not more than 250 V for single-phase fans and 480 V for other fans, and their rated power input being less than 125 W. According to the testing method, the comfort fans are classified into two groups: – pedestal fans, table fans, wall fans, louvre fans, tower fans, bladeless fans; – ceil...view more

IEC 60879:2019 specifies the performance-measuring methods of comfort fans and regulators for household and similar purposes, including conventional fans, tower fans and bladeless fans, their rated voltage being not more than 250 V for single-phase fans and 480 V for other fans, and their rated power input being less than 125 W.
According to the testing method, the comfort fans are classified into two groups:
– pedestal fans, table fans, wall fans, louvre fans, tower fans, bladeless fans;
– c...view more

This European Standard applies to high efficiency particulate and ultra low penetration air filters (EPA, HEPA and ULPA) used in the field of ventilation and air conditioning and for technical processes, e.g. for applications in clean room technology or pharmaceutical industry.
It establishes a procedure for the determination of the efficiency on the basis of a particle counting method using a liquid (or alternatively a solid) test aerosol, and allows a standardized classification of these filt...view more

This document provides guidance for practical applications of those principles in the measurement of the performance of ventilators falling under the scope of ISO 16494:2014. The references listed in the Bibliography give detailed information on the principles and theory of uncertainty as applied to measurements.

This document establishes a classification for fan efficiency. It applies to all electric-motor-driven fan systems that utilize a specific combination of components as defined below: a) fan airflow performance determined in accordance with an accepted performance standard; b) polyphase induction motors with nominal motor efficiency specified in this document; NOTE 1 Other types of motors are explicitly excluded. c) pulse-width modulated variable frequency drives (VFDs) for use with single motors...view more