2020-07-20 JF: Through the decision C132/2020 taken on 2020-07-08, the CEN Technical Board approved the revised Annex ZA and therefore, the European Amendment, of EN ISO 19085-10:2019. European amendment is under publication.

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

This document deals with all significant hazards, hazardous situations and events which are relevant to:
-   bridge sawing machines;
-   bridge sawing and milling machines;
-   numerical control bridge sawing/milling machines.
These machines are designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifie...
view more

    • sale 10% off
    • Standard
      62 pages
      English language
    • e-Library read for
      1 day

This international standard deals with all significant hazards, hazardous situations and events relevant to stationary multi-blade rip sawing machines, hereinafter referred to as “machines”, designed to cut solid wood and material with similar physical characteristics as wood, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are ta...view more

    • sale 10% off
    • Standard
      52 pages
      English language
    • e-Library read for
      1 day

This international standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), also known as “table saws” (in the USA), hereinafter referred to as “machines”, designed to cut wood and material with similar physical characteristics to wood, when they are operated, adjusted and maintained as intended and under the conditio...view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2018-11-02: this prA covers common mods to prEN IEC 62841-3-9 (PR=67950)

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62841 applies to transportable mitre saws intended to be used with a
toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals
except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might
simply be referred to as saw or tool.
This International Standard does not apply to mitre saws intended to cut other metals, such
as magnesium, steel and iron. This document does not apply to mitre saws with an automatic
feeding...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

2020-01-06 JF: the Annex ZZ which had been approved by  the BT is not the most recent one -> need to submit the correct Annex ZZ to the BT. The BT document under preparation.
2019-11-05 JF: Through the BT decision D163/C100, the BT approved the revised Annex ZZ of the standard. Standard under publlication.
NEXT ACTION: CCMC ACTION BY 2019-08-30: submission of the revised Annex ZZ for the BT approval.
Compliant assessment of the Annex ZA received.
2019-05-08 JF: HAS Consultants confir...
view more

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

EN-IEC 62841-4-1 applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. This standard does not apply to - chain saws for tree service as defined in ISO 11681-2; or - pole-mounted pruners. The chain saws covered by this standard are designed only to be operated with the right hand on ...view more

    • sale 10% off
    • Standard
      68 pages
      English language
    • e-Library read for
      1 day

This international standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to displaceable building site saws, hereinafter referred to as “machines”, designed to cut solid wood and material with similar characteristics to wood (see ISO 19085-1:2016), when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, disman...view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

This international standard deals with all significant hazards, hazardous situations and events as listed in
Clause 4 which are relevant to manually loaded and unloaded vertical panel sawing machines (with or without
integrated feed) hereinafter referred to as "machines" when they are operated, adjusted and maintained as
intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.
Also transport, assembly, dismantling, disabling and scrapping phases are...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to firewood and dual-purpose circular sawing machines for firewood/circular saw benches,with manual loading and/or unloading, hereinafter referred to as machines, designed to cut solid wood." On Combined circular sawing machines for firewood - Log splitting machines only the circular sawing machine for firewood is covered by this European Standard. For the requirements for t...view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      61 pages
      German language
    • e-Library read for
      1 day

2017-03-16 SW: DOW=DOR+24 m.

    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day

This standard applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 360 mm, which hereinafter might simply be referred to as saw or tool.
This standard applies to mitre saws having a mass of:
- maximum 25 kg for tools capable of being lifted by hand by one person;
- maximum 50 kg for tools capable of being lifted by hand by two persons.

    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day

This international standard deals with all significant hazards, hazardous situations and events as listed in
Clause 4 which are relevant to stationary and displaceable dimensions saws, hereinafter referred to as
machines‖, designed to cut wood and material with similar physical characteristics to wood, when they are
operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer
including reasonably foreseeable misuse. Also transport, assembly, dismantling, di...
view more

    • sale 10% off
    • Standard
      62 pages
      English language
    • e-Library read for
      1 day

This international standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to horizontal beam panel sawing machines with the saw carriage of the front cutting line mounted below the workpiece support, which are manually or mechanically loaded and/or unloaded, hereinafter referred to as "machines", when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably fore...view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is applicable, except as follows:
Addition:
This part of EN 50632 applies to transportable mitre saws intended to cut wood and wood-based materials.

    • sale 10% off
    • Standard
      5 pages
      English language
    • e-Library read for
      1 day

This International standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting up, maintenance, and repair) of machines, as defined in clause 3 of this standard, whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a sawing tool.
This international standard takes into account the intended use, reasonably foreseeable misuse...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

ISO 16093:2017 deals with all significant hazards, hazardous situations and events to sawing machines as defined in Clause 3, whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
ISO 16093:2017 is applicable to (metal) sawing machines which are manufactured after the date of publication of this document.
When additional processing (i.e. ...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

Standard applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 360 mm, which hereinafter might simply be referred to as saw or tool. This standard does not apply to mitre saws intended to cut other metals, such as magnesium, steel and iron. This standard does not apply to mitre saws with an automatic feeding device.

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

D147/C001: NWI aproved for UAP * Draft available at CCMC*2014-04-03: UAP alloacted to cpalagi@cencenelec.eu

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies all significant hazards, hazardous situation and events as listed in Clause 4, relevant to stationary and displaceable manual horizontal cutting cross-cut circular sawing machines with one saw unit (manual radial arm saws), hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials if they are covered with plastic edging and/or plastic laminates, when they are used as intended and under the condition...view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the man...view more

    • sale 10% off
    • Standard
      62 pages
      English language
    • e-Library read for
      1 day

This amendment was developed to bring EN 61029-2-5:2011 in line with the European Machinery Directive 2006/42/EC

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the design and manufacturing of band saw machines. The machines covered by this European Standard are used to cut bone and meat. The band saw machines covered by this European Standard do not include band saw machines for processing wood and similar materials, and the requirements of EN 1807 do not apply.
Band saw machines for domestic use are not included in this European Standard.
This European Standard only applies to machines which are manu...
view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

EN IEC 62841-2-5 applies to hand-held circular saws, which hereinafter will be referred to as saws. This standard does not apply to saws designed for use with abrasive wheels.

    • sale 10% off
    • Standard
      46 pages
      English language
    • e-Library read for
      1 day

EN IEC 62841-3-1 applies to transportable table saws with - a toothed single blade; or - stacked blades that cut a single groove or slot; or - a moulding head cutter intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter between 105 mm and 315 mm, which hereinafter may simply be referred to as saw or tool. This standard does not apply to table saws intended to cut other metals, such as magnesium, steel and iron. This standard ...view more

    • sale 10% off
    • Standard
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to pendulum cross-cut sawing, herein after referred to as 'machines', designed to cut solid wood, chipboard, fibreboard, plywood and also these materials when covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This European Stan...view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to transportable combined mitre and bench saws with a saw blade diameter not exceeding 315 mm and intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium.

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to semi-automatic horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws), hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials when covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the man...view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

IEC 60317-20:2013 specifies the requirements of solderable enamelled round copper winding wire of class 155 with a sole coating based on polyurethane resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE: A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters cov...view more

    • sale 15% off
    • Standard
      20 pages
      English and French language

2013-07-10 - Publication editing allocated to cpalagi@cencenelec.eu 2013-02-04 - UAP text to be sent to Consultant prior to UAP D144/C006: NWI approved*2013-03-22: UAP processing allocated to aclausse@cencenelec.eu

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable log band sawing machines with either manual or automatic loading and/or unloading, hereinafter referred to as "machines", designed to cut solid wood, when they are used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse.
This European Standard does not apply to:
a)   table band sa...
view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      60 pages
      English language
    • e-Library read for
      1 day

This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to single blade automatic and semi-automatic up-cutting cross cut sawing machines with one sawing unit herein after referred to as ‘machines’ designed to cut solid wood, chipboard, fibreboard, plywood and also these materials when they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the ...view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable table band saws and band re-saws with manual loading and/or unloading, also when mounted to and powered by a motor tractor, hereinafter together referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood, nd also these materials covered with plastic edging and/or plastic/light alloy laminates, when they are u...view more

    • sale 10% off
    • Standard
      70 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      70 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to transportable combined mitre and bench saws with a saw blade diameter not exceeding 315 mm and intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium.

    • sale 10% off
    • Standard
      65 pages
      English language
    • e-Library read for
      1 day

This International Standard applies to transportable circular saws intended for cutting wood and similar materials with a blade diameter not exceeding 260 mm as defined in 2.101.

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This document applies to ...view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double blade circular sawing machines for cross-cutting with integrated feed of the saw units and with manual loading and/or unloading, hereinafter referred to as 'machines'. These are machines designed to cut solid wood, chipboard, fibreboard and plywood, and also these materials when covered with plastic edging and/or plastic/light alloy laminate, when they are...view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to circular saw benches/up-cutting cross-cut sawing machines, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials (where) they are covered with plastic edging and/or plastic/light alloy laminates #when they are used as intended and under the conditions foreseen by the manufacturer including reasonably for...view more

    • sale 10% off
    • Standard
      67 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double mitre sawing machines for V-cutting with a maximum cutting capacity (width and height) of ≤ 200 mm, fitted or not with pneumatic systems, hereinafter referred to as the machine, designed to cut solid wood, chipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings, when they are used as intended and und...view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to single blade circular log sawing machines with saw blade diameter ≥ 600 mm and with integrated feed table with manual loading and/or unloading, (hereinafter referred to as machines), designed to cut solid wood when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This European Standard is not...view more

    • sale 10% off
    • Standard
      62 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies all requirements and/or measures to reduce the hazards and limit the risks on multi-blade cross-cut sawing machines (with minimum two saw unit) with integrated feed of the work-piece and manual loading and/or unloading fitted with a saw blade drive motor for each saw unit, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy ...view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

    • sale 10% off
    • Standard
      65 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to manually loaded and unloaded vertical panel sawing (with or without integrated feed) machines fitted with:
-   the facility for scoring;
-   an angle cutting device;
-   a middle support device;
-   a programmable stop for parallel vertical cuts;
-   the facility for grooving with a width of at most 20 mm in one pass by using a milling tools,
hereinafter referred to a...
view more

    • sale 10% off
    • Standard
      57 pages
      English language
    • e-Library read for
      1 day

Applies to transportable band saws having a length of saw band not more than 2 500 mm and band wheels having a diameter of not more than 315 mm.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

Applies to transportable band saws having a length of saw band not more than 2 500 mm and band wheels having a diameter of not more than 315 mm.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day