This International Standard specifies the test procedures, conditions and methods for
determining the main performance parameters and operational characteristics of electroslag
remelting furnaces.
Measurements and tests that are solely used for the verification of safety requirements of the
installations are outside the scope of this document and are covered by IEC 60519-1 and
IEC 60519-8.
This document applies to industrial electroslag remelting furnaces, the rated capacity of which
is e...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60519 specifies particular safety requirements for electroslag remelting
equipment and installations.
This document specifies safety requirements applicable to mainly electroheating installations
for remelting and, in some cases, for refining processes of metals through direct resistance
heating of a conductive slag.
The object of this document is to specify the particular requirements for the safety of persons
in or around an electroslag remelting furnace. The general req...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

IEC 60779:2020 specifies the test procedures, conditions and methods for determining the main performance parameters and operational characteristics of electroslag remelting furnaces.
Measurements and tests that are solely used for the verification of safety requirements of the installations are outside the scope of this document and are covered by IEC 60519-1 and IEC 60519-8.
This third edition cancels and replaces the second edition published in 2005. It constitutes a technical revision.
Th...
view more

    • sale 15% off
    • Standard
      46 pages
      English and French language

This part of IEC 60519 specifies the general safety requirements for industrial installations or
equipment intended for electroheating (EH) and electroheating based treatment
technologies as well as for electromagnetic processing of materials (EPM). This document
deals with the significant hazards, hazardous situations or hazardous events relevant to
industrial EH and EPM equipment, as listed in Annex A, for normal operation and for single
fault condition as well as under conditions of reas...
view more

    • sale 10% off
    • Standard
      105 pages
      English language
    • e-Library read for
      1 day

IEC 60519-8:2020 specifies particular safety requirements for electroslag remelting equipment and installations.
This document specifies safety requirements applicable to mainly electroheating installations for remelting and, in some cases, for refining processes of metals through direct resistance heating of a conductive slag.
The object of this document is to specify the particular requirements for the safety of persons in or around an electroslag remelting furnace. The general requirements ...
view more

    • sale 15% off
    • Standard
      50 pages
      English and French language

IEC 60519-1:2020 is available as IEC 60519-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60519-1:2020 specifies the general safety requirements for industrial installations or equipment intended for electroheating (EH) and electroheating based treatment technologies as well as for electromagnetic processing of materials (EPM). This document deals with the significant hazards, haz...
view more

    • sale 15% off
    • Standard
      208 pages
      English and French language

EN-IEC 62282-8-201 defines the evaluation methods of typical performances for electricenergy storage systems using hydrogen. This is applicable to the systems that useelectrochemical reaction devices for both power charge and discharge. This document appliesto systems that are designed and used for service and operation in stationary locations (indoorand outdoor).The conceptual configurations of the electric energy storage systems using hydrogen are shownin Figure 1 and Figure 2. Figure 1 shows ...view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

IEC 63078:2019 specifies the test procedures, conditions and methods for determining the main performance parameters and operational characteristics of induction through-heating installations. Measurements and tests that are solely used for the verification of safety requirements of the installations are outside the scope of this document and are covered by IEC 60519-1 and IEC 60519-3.

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

IEC 63078:2019 specifies the test procedures, conditions and methods for determining the main performance parameters and operational characteristics of induction through-heating installations.
Measurements and tests that are solely used for the verification of safety requirements of the installations are outside the scope of this document and are covered by IEC 60519-1 and IEC 60519-3.

    • sale 15% off
    • Standard
      71 pages
      English and French language

IEC 60519-12:2016 specifies safety requirements for industrial electroheating equipment and installations in which infrared radiation – usually generated by infrared emitters – is significantly dominating over heat convection or heat conduction as means of energy transfer to the workload. A further limitation of the scope is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such...view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

IEC TS 62996:2017(E) addresses the safety assessments in the frequency range between 1 kHz and 6 MHz and provides limits for touch and touch currents for industrial installations or equipment for electroheating (EH) and electromagnetic processing of materials (EPM). Indirect contact by capacitive currents to parts of an earthed human body in an open space are also included, since the current is then distributed analogously in the part of the body and differs from cases of induced electric shock.

    • sale 15% off
    • Technical specification
      42 pages
      English language

IEC/TS 62997:2017(E) specifies the characteristics of external magnetic nearfields, computations of and requirements on induced electric fields in body tissues in the frequency range from 1 Hz to 6 MHz with respect to induced electric shock phenomena, for electroheating (EH) based treatment technologies and for electromagnetic processing of materials (EPM). The phenomena include specific absorption rates with time integration.

    • sale 15% off
    • Technical specification
      69 pages
      English language

IEC 62090:2017 applies to labels on the packaging of electronic components for automatic handling in B2B processes. These labels use linear bar code and two-dimensional (2D) symbols. Labels for direct product marking and shipping labels are excluded. Labels required on the packaging of electronic components that are intended for the retail channel of distribution in B2C processes are also excluded from this document.
Bar code and 2D symbol markings are used, in general, for automatic identifica...
view more

    • sale 15% off
    • Standard
      64 pages
      English and French language

IEC 60519-12:2016 specifies safety requirements for industrial electroheating equipment and installations in which infrared radiation – usually generated by infrared emitters – is significantly dominating over heat convection or heat conduction as means of energy transfer to the workload. A further limitation of the scope is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by therm...view more

    • sale 15% off
    • Standard
      67 pages
      English and French language

This part of IEC 60519 specifies general safety requirements for industrial installations or
equipment intended for electroheating (EH) and electroheating based treatment
technologies as well as for electromagnetic processing of materials (EPM).
The requirements are applicable to industrial installations or equipment with the possible use
as:
– equipment for direct and indirect resistance heating,
– equipment for electric resistance trace heating,
– equipment for induction heating,
– equ...
view more

    • sale 10% off
    • Standard
      104 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies the basic test procedures, conditions and methods for
establishing the main performance parameters and the main operational characteristics of
industrial installations and equipment intended for electroheating (EH) or electromagnetic
processing of materials (EPM).
Measurements and tests that are solely used for the verification of safety requirements of
equipment for EH or for EPM are outside the scope of this standard and are covered by the
IEC 60519 ...
view more

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This part of EN 50156 applies to the requirements for design, development and approval of safetyrelevant
equipment for the safety related system for furnaces that are operated with solid, liquid or
gaseous fuels and their ancillary equipment.
This part of EN 50156 specifies the requirements for safety-related equipment that is necessary to
meet the safety conditions of furnaces, to reduce the hazards of combustion and to protect the heated
systems from damage e.g. by overheating. Subsystems...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

lEC 60320-1:2015 sets the general requirements for appliance couplers for two poles and two poles with earth contact and for the connection of electrical devices for household and similar onto the mains supply. This part of lEC 60320 is also valid for appliance inlets/appliance outlets integrated or incorporated in appliances. The rated voltage does not exceed 250 V (a.c.) and the rated current does not exceed 16 A. This third edition cancels and replaces the second edition published in 2001 and...view more

    • sale 15% off
    • Standard
      125 pages
      English and French language

IEC 60398:2015 specifies the basic test procedures, conditions and methods for establishing the main performance parameters and the main operational characteristics of industrial installations and equipment intended for electroheating (EH) or electromagnetic processing of materials (EPM). This third edition cancels and replaces the second edition of IEC 60398 published in 1999 and the first edition of IEC TS 62796 published in 2013. This edition constitutes a technical revision. This edition inc...view more

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

IEC 60519-1:2015 specifies general safety requirements for industrial installations or equipment intended for electroheating (EH) and electroheating based treatment technologies as well as for electromagnetic processing of materials (EPM). This fifth edition cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The title and scope of the s...view more

    • sale 10% off
    • Standard
      104 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Corrigendum
      1 page
      English and French language
    • e-Library read for
      1 day

This International Standard specifies test procedures, conditions and methods according to
which the main parameters and the main operational characteristics of industrial infrared
emitters are established.
A limitation of the scope of this standard is that the infrared emitters have a maximum spectral
emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband
continuous spectra such as by thermal radiation or high pressure arcs.
IEC 60519-1:2010 [1] 1 defines i...
view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

IEC 60398:2015 specifies the basic test procedures, conditions and methods for establishing the main performance parameters and the main operational characteristics of industrial installations and equipment intended for electroheating (EH) or electromagnetic processing of materials (EPM). This third edition cancels and replaces the second edition of IEC 60398 published in 1999 and the first edition of IEC TS 62796 published in 2013. This edition constitutes a technical revision. This edition inc...view more

    • sale 15% off
    • Standard
      76 pages
      English and French language
    • sale 10% off
    • Corrigendum
      1 page
      English and French language
    • e-Library read for
      1 day

IEC 62798:2014 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of industrial infrared emitters are established. A limitation of the scope of this standard is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by thermal radiation or high pressure arcs.

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

IEC 62798:2014 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of industrial infrared emitters are established. A limitation of the scope of this standard is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by thermal radiation or high pressure arcs. The contents of the corrigendum of November 2014 ha...view more

    • sale 15% off
    • Standard
      97 pages
      English and French language

This International Standard specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of industrial infrared electroheating installations are established. A limitation of the scope is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by thermal radiation or high pressure arcs. In industrial infrared electroheati...view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

IEC 62395-1 specifies requirements for electrical resistance trace heating systems and includes general test requirements. This standard pertains to trace heating systems that may comprise either factory-fabricated or field-assembled (work-site) units, and which may be series and parallel trace heaters or surface heaters (heater pads and heater panels) that have been assembled and/or terminated in accordance with the manufacturer?s instructions. This standard also includes requirements for termi...view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62395 provides detailed recommendations for the system design, installation, maintenance and repair of electrical resistance trace heating systems in industrial and commercial applications. This standard does not include or provide for any applications in potentially explosive atmospheres. This standard pertains to trace heating systems that may comprise either factory fabricated or field-assembled (work-site) units, and which may be series or parallel trace heaters, or surface ...view more

    • sale 10% off
    • Standard
      89 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following. Replacement: This part of IEC 60519 provides particular safety requirements for electric arc furnace installations and its operating and maintenance personnel. These safety provisions concern the protection of persons and the environment against dangers of electrical origin and also against certain dangers of non-electrical origin. This standard is applicable to electroheating installations such as: a) Furnaces for direct arc heating, forming a...view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC/TS 62395-2:2008 provides detailed recommendations for the system design, installation, maintenance and repair of electrical resistance trace heating systems in industrial and commercial applications. Pertains to trace heating systems that may comprise either factory constructed or field (work-site) assembled units, and which may be series heater cables, parallel heater cables, heater pads or heater panels that have been assembled and/or terminated in accordance with the manufacturer's instru...view more

    • sale 10% off
    • Standard
      89 pages
      English language
    • e-Library read for
      1 day

IEC 62395-1:2013 specifies requirements for electrical resistance trace heating systems and includes general test requirements. This second edition cancels and replaces the previous edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Tests have been added for trace heating on sprinkler systems; - The flammability test has been changed to align with the latest draft of future IEC/...view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

IEC 62395-2:2013 provides detailed recommendations for the system design, installation, maintenance and repair of electrical resistance trace heating systems in industrial and commercial applications. This standard does not include or provide for any applications in potentially explosive atmospheres. This standard cancels and replaces IEC/TS 62395-2:2008. This standard includes the following significant technical changes with respect to IEC/TS 62395-2:2008:
- This document has been changed from...
view more

    • sale 15% off
    • Standard
      180 pages
      English and French language

IEC 62395-1:2013 specifies requirements for electrical resistance trace heating systems and includes general test requirements. This second edition cancels and replaces the previous edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Tests have been added for trace heating on sprinkler systems;
- The flammability test has been changed to align with the latest draft of future IE...
view more

    • sale 15% off
    • Standard
      91 pages
      English and French language

IEC 60519-4:2013 provides particular safety requirements for electric arc furnace installations and its operating and maintenance personnel. These safety provisions concern the protection of persons and the environment against dangers of electrical origin and also against certain dangers of non-electrical origin. This fourth edition cancels and replaces the third edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical ch...view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC 62693:2013 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of industrial infrared electroheating installations are established. A limitation of the scope is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by thermal radiation or high pressure arcs.

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

IEC 60519-4:2013 provides particular safety requirements for electric arc furnace installations and its operating and maintenance personnel. These safety provisions concern the protection of persons and the environment against dangers of electrical origin and also against certain dangers of non-electrical origin. This fourth edition cancels and replaces the third edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical ch...view more

    • sale 15% off
    • Standard
      46 pages
      English and French language

IEC 62693:2013 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of industrial infrared electroheating installations are established. A limitation of the scope is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by thermal radiation or high pressure arcs.

    • sale 15% off
    • Standard
      61 pages
      English and French language
    • sale 10% off
    • Standard – translation
      42 pages
      Slovenian language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following.
Replacement: This part of IEC 60519 provides safety requirements for electrical resistance trace heating systems used in industrial and commercial applications for piping, vessels, roofs, concrete slab heating and other similar applications. This standard pertains to trace heating systems that may comprise either factory fabricated or field (work-site) assembled units, and which may be series heater cables, parallel heater
cables, heater pads...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

IEC 60519-10:2013 provides safety requirements for electrical resistance trace heating systems used in industrial and commercial applications for piping, vessels, roofs, concrete slab heating and other similar applications. This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - The structure has been amended and adjusted t...view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

IEC 60519-10:2013 provides safety requirements for electrical resistance trace heating systems used in industrial and commercial applications for piping, vessels, roofs, concrete slab heating and other similar applications. This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- The structure has been amended and adjusted ...
view more

    • sale 15% off
    • Standard
      34 pages
      English and French language

This International Standard specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of electric arc furnaces (EAF) operated either with alternating current (EAFac) or with direct current (EAFdc) with a capacity above 500 kg/heat are established. The EAF technology is also applicable to furnaces, in which liquid metal is kept at high temperature or superheated to casting temperature (e.g. in a ladle furnace (LF), operated w...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

IEC 60676:2011 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of electric arc furnaces (EAF) operated either with alternating current (EAFac) or with direct current (EAFdc) with a capacity above 500 kg/heat are established. This third edition cancels and replaces the previous edition published in 2002 and constitutes a technical revision. Significant technical changes with respect to the previous edition are as fo...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

Will supersede HD 599 S1:1992

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

La CEI 60683:2011 spécifie les procédures, les conditions et les méthodes d'essai selon lesquelles les paramètres principaux et les caractéristiques de fonctionnement principales des fours à arc submergé dont les niveaux de puissance électrique assignée sont supérieurs à 500 kVA sont établis. La présente norme est applicable aux fours à arc submergé à une ou plusieurs électrodes. Afin de déterminer d'autres évaluations techniques ou économiques, des essais supplémentaires peuvent être nécessaire...view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

IEC 60676:2011 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of electric arc furnaces (EAF) operated either with alternating current (EAFac) or with direct current (EAFdc) with a capacity above 500 kg/heat are established. This third edition cancels and replaces the previous edition published in 2002 and constitutes a technical revision. Significant technical changes with respect to the previous edition are as fo...view more

    • sale 15% off
    • Standard
      38 pages
      English and French language

IEC 60683:2011 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of a submerged-arc furnace (SAF) with rated electrical power levels above 500 kVA are established. This standard is applicable to SAF with one or more electrodes. In order to determine further technical or economic assessments, additional tests may be necessary. Tests for some special equipment for semiconductor converter controlled furnaces, such as co...view more

    • sale 15% off
    • Standard
      29 pages
      English and French language

This International Standard specifies test methods for the determination of the available microwave output power and the efficiency of frequency conversion from the electrical input in industrial microwave heating installations. This standard also specifies test methods for assessing the microwave power deposition in the microwave workload - the microwave workload power, in microwave-only installations. This standard is applicable to industrial microwave heating equipment and installations in th...view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

IEC 61307:2011 specifies test methods for the determination of the available microwave output power and the efficiency of frequency conversion from the electrical input in industrial microwave heating installations. This standard also specifies test methods for assessing the microwave power deposition in the microwave workload - the microwave workload power, in microwave-only installations. This standard is applicable to industrial microwave heating equipment and installations in the frequency r...view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

IEC 61307:2011 specifies test methods for the determination of the available microwave output power and the efficiency of frequency conversion from the electrical input in industrial microwave heating installations. This standard also specifies test methods for assessing the microwave power deposition in the microwave workload - the microwave workload power, in microwave-only installations. This standard is applicable to industrial microwave heating equipment and installations in the frequency r...view more

    • sale 15% off
    • Standard
      29 pages
      English and French language