25.040.10 - Machining centres

IEC 62566-2:2020 provides requirements for achieving highly reliable HDL-Programmed Devices (HPDs), for use in I&C systems of nuclear power plants performing functions of safety category B or C as defined by IEC 61226.
The programming of HPDs relies on Hardware Description Languages (HDL) and related software tools. They are typically based on blank Field Programmable Gate Arrays (FPGAs) or similar micro-electronic technologies such as Programmable Logic Devices (PLD), Complex Programmable Logi...view more

This document specifies, with reference to the ISO 230 series, some families of tests for accessory spindle heads used on machining centres or numerically controlled milling machines, etc., where applicable, with horizontal spindle (i.e. horizontal Z-axis). The tests considered in this document are also applicable to manual indexing heads. This document establishes the tolerances or maximum acceptable values for the test results corresponding to general purpose and normal accuracy spindle heads ...view more

This document specifies, by reference to the relevant parts of ISO 230, several families of tests for machining centres with horizontal or vertical spindle or with universal heads of different types, standing alone, or integrated in flexible manufacturing systems. This document also establishes the tolerances or maximum acceptable values for the test results corresponding to general purpose and normal accuracy machining centres. This document is also applicable, totally or partially, to numerica...view more

ISO 10791-1:2015 specifies, with reference to ISO 230 1, the geometric tests for machining centres (or other numerically controlled machines, where applicable) with horizontal spindle (i.e. horizontal Z-axis). It applies to machining centres having three numerically controlled linear axes (X-axis up to 5 000 mm length, Y-axis up to 3 200 mm length, and Z-axis up to 2 000 mm length), but refers also to supplementary movements, such as those of rotary, tilting, and swivelling tables. Movements oth...view more

ISO 10791-6:2014 specifies, with reference to ISO 230‑1 and ISO 230‑4, certain kinematic tests for machining centres, concerning spindle speeds, feed and the accuracy of the paths described by the simultaneous movement of two or more numerically controlled (NC) linear and/or rotary axes. It applies to machining centres having three linear axes (X, Y, and Z) and additionally one or two rotary axes (A, B, or C). Movements other than those mentioned are considered as special features and the releva...view more

This part of ISO 11064 specifies ergonomic principles, recommendations and requirements for the design of workstations found in control centres. It covers workstation design with particular emphasis on layout and dimensions. This standard covers primarily seated, visual-display-based workstations although control workstations at which operators stand are also addressed. These different types of workstation are to be found in applications such as transportation control, process control and securi...view more

ISO 11064-4:2013 specifies ergonomic principles, recommendations and requirements for the design of workstations found in control centres. It covers control workstation design with particular emphasis on layout and dimensions. It is applicable primarily to seated, visual-display-based workstations, although control workstations at which operators stand are also addressed. These different types of control workstation are to be found in applications such as transportation control, process control ...view more

ISO 10791-10:2007 specifies, with reference to ISO 230-3, tests for the evaluation of thermal distortions of the machine structure and positioning system, up to 2 000 mm in length, of machining centres. It gives three test methods: environmental temperature variation error, thermal distortion caused by rotating spindle, and thermal distortion caused by moving linear axes. There is no intention of assigning any numerical tolerances associated with the tests specified.

This part of ISO 11064 establishes ergonomic principles for the evaluation of control centres. It gives requirements, recommendations and guidelines on evaluation of the different elements of the control centre, i.e. control suite, control room, workstations, displays and controls, and work environment. It covers all types of control centres, including those for the process industry, transport systems and dispatching rooms in the emergency services. Although this part of ISO 11064 is primarily i...view more

ISO 11064-6 establishes environmental requirements for the ergonomic design, upgrading or refurbishment of control rooms, control suite and all other rooms such as offices, technical and auxiliary rooms. The following aspects are: - thermal environment, - air distribution principles, - lighting environment, - acoustical environment, - air composition, - vibrations.

ISO - Taking over of a ISO Technical Corrigendum

This Part of ISO 11064 specifies requirements and establishes general principles for the ergonomic design of a new control centre, as well as for control centre expansion, refurbishment, and technology based upgrades. This part of ISO 11064 covers all types of control centres, for example, those found in process plants, transport/logistic control systems, and people deployment transportation systems.

This Part of ISO 11064 specifies requirements and establishes general principles for the ergonomic design of a new control centre, as well as for control centre expansion, refurbishment, and technology based upgrades. This part of ISO 11064 covers all types of control centres, for example, those found in process plants, transport/logistic control systems, and people deployment transportation systems.