25.100 - Cutting tools

This document is applicable for bonded abrasive products in general. NOTE 1 Bonded abrasive products are e.g. grinding wheels, segments, sticks and stones. This document specifies: a) ISO type number and shape; b) dimensional symbols; c) standard profiles; d) specification; e) designation; f) marking requirements. NOTE 2 This document is general and is complemented by ISO 603 (all parts) that is applicable for dimensions, by ISO 6103 that is applicable for permissible unbalance and by ISO 13942 ...view more

EN-ISO 19432-1 specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine-driven cut-off machines intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bonded-abrasive and/or super-abrasive (for example diamond) cut-off wheel having a maximum outer diam...view more

This document is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This document also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
This document does not apply to superabrasive products and coated abrasive pro...view more

This document is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This document also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
This document does not apply to superabrasive products and coated abrasive pro...view more

This European Standard only applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels.
This European Standard specifies requirements and/or measures for the removal or reduction of hazards resulting from th...view more

IEC 62841-3-12:2017 applies to transportable threading machines. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, wh...view more

This document specifies the essential limit deviations and run-out tolerances for bonded abrasive products.

This document applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels.
This document specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and applicatio...view more

This document defines the concept of how to design tool items, limited to any kind of burrs, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of burrs. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D models for cutting tools; — creation and exchange of 3D models for cutting items; — cre...view more

This document deals with diamond tools whose cutting edges are made of CVD diamond, either as a solid single piece or as a coating. The tool specifications are differentiated into CVD diamond-coated tools (CVD diamond thin-film coatings) and tools with a CVD diamond cutting insert. According to ISO 513, CVD diamond tools can be classified under "hard coatings of hard metal and ceramic" and "binder-free polycrystalline diamond". In order to differentiate the CVD diamond tools from tools with mono...view more

This document defines the concept of how to design the connection interfaces for adaptive and tool items, limited to any kind of standardized connections, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of connection interface. Not all dimensions given in this document are defined in the ISO 13399 series. The following are outside the scope of this document: — applications where these stan...view more

This document defines the concept of how to design adaptive items, limited to any kind of driven tool units, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of driven tool units. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — con...view more

This document specifies a concept for the design of machine operated feed out tools, limited to any kind of machine operated feed out tools, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of machine operated feed out tools. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D for cutting t...view more

This document specifies the dimensions and the mechanical characteristics of metal slitting saws, metric series. It applies to the following two types of metal slitting saws: — metal slitting saws with fine teeth; — metal slitting saws with coarse teeth. If there is a need to extend the range or introduce other series of teeth, it is intended that such additions be according to the data given in the graph in Annex A.

This document specifies the dimensions for interchangeability between milling cutters with tenon drive and the cutter seating of cutter arbors. It is applicable only to milling cutters of the metric series. It gives the interchangeability dimensions for: — the milling cutters; — the cutter seating on the arbor; — the cutter retaining screw on the cutter arbor.

This document specifies the dimensions of machine bridge reamers. It gives, for a series of diameter ranges, d1, from 6 mm to 50,8 mm, the values, in millimetres, for the following dimensions of these tools: — overall length, l3; — total cutting edge length, l2; — tapered cutting edge length, l1. Unless otherwise stated, these reamers are right-hand cutting.

This document specifies a concept for the design of tool items, limited to any kind drilling and countersinking tools for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of drills and countersinking tools for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D model...view more

This document specifies a concept for the design of tool items, limited to any kind of cartridges for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of cartridges for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D mode...view more

This document specifies requirements for the following grades of wrought tool steels:
a) non-alloy cold-work tool steels;
b) alloy cold-work tool steels;
c) alloy hot-work tool steels;
d) high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1.
NOTE Tables 2, 4, 6 and ...view more

2017-03-16 SW: DOW=DOR+24 m.