25.100.01 - Cutting tools in general

This document defines the concept of how to design tool items, limited to any kind of burrs, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of burrs. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D models for cutting tools; — creation and exchange of 3D models for cutting items; — cre...view more

This document deals with diamond tools whose cutting edges are made of CVD diamond, either as a solid single piece or as a coating. The tool specifications are differentiated into CVD diamond-coated tools (CVD diamond thin-film coatings) and tools with a CVD diamond cutting insert. According to ISO 513, CVD diamond tools can be classified under "hard coatings of hard metal and ceramic" and "binder-free polycrystalline diamond". In order to differentiate the CVD diamond tools from tools with mono...view more

This document defines the concept of how to design the connection interfaces for adaptive and tool items, limited to any kind of standardized connections, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of connection interface. Not all dimensions given in this document are defined in the ISO 13399 series. The following are outside the scope of this document: — applications where these stan...view more

This document defines the concept of how to design adaptive items, limited to any kind of driven tool units, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of driven tool units. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — con...view more

This document specifies a concept for the design of machine operated feed out tools, limited to any kind of machine operated feed out tools, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of machine operated feed out tools. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D for cutting t...view more

This document specifies a concept for the design of tool items, limited to any kind drilling and countersinking tools for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of drills and countersinking tools for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D model...view more

This document specifies a concept for the design of tool items, limited to any kind of cartridges for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of cartridges for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D mode...view more

This document specifies requirements for the following grades of wrought tool steels:
a) non-alloy cold-work tool steels;
b) alloy cold-work tool steels;
c) alloy hot-work tool steels;
d) high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1.
NOTE Tables 2, 4, 6 and ...view more

2017-03-16 SW: DOW=DOR+24 m.

ISO 16084:2017 specifies requirements and provides calculations for the permissible static and dynamic residual unbalances of rotating single tools and tool systems. It is based on the guideline that unbalance related centrifugal forces induced by the rotational speed do not harm the spindle bearings, as well as prevent unbalance related impairments of machining processes, tool life and work piece quality. NOTE 1 Tools and tool systems covered by ISO 16084:2017 are, for example, those with hollo...view more

ISO 3364:2017 specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal clearance. These inserts are primarily intended to be mounted by top and hole clamping or by hole alone on turning and boring tools.

This European Standard applies to diamond wire saws being used in quarries as well as in processing plants
for cutting marble, granite and other stones out of a mass of rocks in a quarry or of blocks having been already
extracted. The machines can be either stationary or travelling on rails during operation.
Diamond wire saws in the scope have an electric main motor. This standard deals with machines working in
one main axis as well as in several axes. Furthermore, this standard does not deal wi...view more

ISO/TS 13399-80:2017 specifies the basic principles for the creation and exchange of simplified 3D models of cutting items, tool items, and adaptive items, using related properties and domains of values. Simplified 3D models contain the following: - naming and defining of the basic design features of cutting items, tool items, and adaptive items, with an association to the used properties; - naming and defining of the internal structure of the 3D model that represents the features and the proper...view more

ISO 1832:2017 establishes a code for the designation of the usual types of indexable inserts for cutting tools in hard cutting materials or any other cutting materials, in order to simplify orders and specifications for such inserts. It also specifies the designations for cubic boron nitride (BL, BH, BC) inserts, tipped and solid, as well as polycrystalline diamond (DP) inserts, tipped.

ISO/TS 13399-310:2017 carbide tips, together with the usage of the related properties and domains of values. ISO/TS 13399-310:2017 carbide tips, together with the usage of the related properties and domains of specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of turning tools with carbide tips, with a link to the properties used; - definitions and identifications of the internal structure of the 3D model tha...view more

ISO/TS 13399-305:2017 specifies a concept for the design of tool items, for all kinds of modular tooling systems with adjustable cartridges for boring, together with the usage of the related properties and domains of values. ISO/TS 13399-305:2017 specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of modular tooling systems with adjustable cartridges for boring, with an association to the used properties; - de...view more

IEC corrigendum

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for routers and trimmers for measurements of dust emission.

ISO/TS 13399-70:2016 is intended to be used for the design of tool layouts for the simulation and the documentation of cutting tool components and cutting tool assemblies. It can be used in connection and correlation with other parts of ISO/TS 13399. The main purpose of this layer structure is the graphical layout of cutting tool components and cutting tool assemblies to be used within tool pre-setting, NC programming and the simulation of processes, as well as for the design of the machining eq...view more

ISO/TS 13399-72:2016 defines the necessary text elements of a drawing frame and determines a standardized data exchange format. Therefore, the effort is reduced for the maintenance of documentation because the content of a drawing header is mated into a specific drawing frame by means of using XML technology and an individual mapping table. The benefit of this concept for manufacturer/supplier and end user is the advantage of a central maintenance of the appropriate templates. It covers the foll...view more