25.160.20 - Welding consumables

This document specifies the preparation of test pieces and specimens for all-weld metal tests in steel,
nickel and nickel alloys.
The test pieces and specimens are used to determine the mechanical properties of all-weld metal where
required by consumable classification standards or for other purposes, in arc welding of steel, nickel
and nickel alloys.
This document is not applicable to single- or two-run welding or fillet welding. For these cases,
ISO 15792-2 and ISO 15792-3 apply.

This document specifies requirements for the classification of solid wire electrodes, solid wires and
rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical
composition.
The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wire
electrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser
beam welding, and other fusion welding processes.

This document specifies requirements for classification of wire electrodes and weld deposits in the
as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of
non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile
strength of up to 570 MPa. One wire electrode can be tested and classified with different shielding gases.
This document constitutes a combined specification providing classification utilizing a...view more

This document specifies the preparation of butt weld test pieces and specimens.
The test pieces and specimens are used to determine the strength and impact properties of welded
joints when testing welding consumables with single-run and two-run techniques.
This document is applicable to welding consumables for arc welding of steel.
This document is not suitable for electro-slag or electro-gas welding.

This document specifies requirements for the classification of covered electrodes and deposited metal
in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of
non-alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile
strength of up to 570 MPa.
This document is a combined specification providing for classification utilizing a system based on the
yield strength and the average impact energy of 47 J of all-...view more

This document specifies the procedure to be used for deposition of a weld metal pad for chemical
analysis.
This document applies to deposition of a weld metal pad by use of covered electrodes, wire electrodes
for gas shielded metal arc welding, tubular cored electrodes for gas shielded metal arc welding and for
non-gas shielded metal arc welding, solid rods and tubular cored rods for gas tungsten arc welding, and
wire-flux and strip-flux combinations for submerged arc welding or electroslag...view more

This document specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One wire electrode can be tested and classified with different shielding gases. This document constitutes a combined specification providing classification utilizing a sys...view more

This document specifies the procedure to be used for deposition of a weld metal pad for chemical analysis. This document applies to deposition of a weld metal pad by use of covered electrodes, wire electrodes for gas shielded metal arc welding, tubular cored electrodes for gas shielded metal arc welding and for non-gas shielded metal arc welding, solid rods and tubular cored rods for gas tungsten arc welding, and wire-flux and strip-flux combinations for submerged arc welding or electroslag weld...view more

This document specifies requirements for the classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. This document is a combined specification providing for classification utilizing a system based on the yield strength and the average impact energy of 47 J of all-weld ...view more

This document specifies the preparation of butt weld test pieces and specimens. The test pieces and specimens are used to determine the strength and impact properties of welded joints when testing welding consumables with single-run and two-run techniques. This document is applicable to welding consumables for arc welding of steel. This document is not suitable for electro-slag or electro-gas welding.

This document specifies the preparation of test pieces and specimens for all-weld metal tests in steel, nickel and nickel alloys. The test pieces and specimens are used to determine the mechanical properties of all-weld metal where required by consumable classification standards or for other purposes, in arc welding of steel, nickel and nickel alloys. This document is not applicable to single- or two-run welding or fillet welding. For these cases, ISO 15792‑2 and ISO 15792‑3 apply.

This document provides a Japanese grouping system for materials for welding purposes, classified in
accordance with the grouping system of ISO/TR 15608.
It can also apply for other purposes, such as heat treatment, forming, and non-destructive testing.
Types of steels are listed in accordance with the grouping system of ISO/TR 15608:2017, Table 1.
Types of aluminium and aluminium alloys are listed in accordance with the grouping system of
ISO/TR 15608:2017, Table 2.
Types of titanium and t...view more

This document specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical composition. The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wire electrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser beam welding, and other fusion welding processes.

This document provides a Japanese grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608. It can also apply for other purposes, such as heat treatment, forming, and non-destructive testing. Types of steels are listed in accordance with the grouping system of ISO/TR 15608:2017, Table 1. Types of aluminium and aluminium alloys are listed in accordance with the grouping system of ISO/TR 15608:2017, Table 2. Types of titanium and titaniu...view more

This document specifies requirements for classification of fluxes for submerged arc welding and
electroslag welding for joining and overlay welding using wire electrodes, tubular cored electrodes,
and strip electrodes.
NOTE This document was based on EN 760:1996.

This document specifies requirements for classification of solid wire electrodes, tubular cored
electrodes and electrode/flux combinations (all-weld metal deposits) for submerged arc welding of
creep resisting and low-alloy elevated-temperature application steels. One electrode can be tested
and classified with different fluxes. The solid wire electrode is also classified separately based on its
chemical composition.
This document is a combined specification providing a classification syste...view more

This document specifies requirements for classification of fluxes for submerged arc welding and electroslag welding for joining and overlay welding using wire electrodes, tubular cored electrodes, and strip electrodes.
NOTE This document was based on EN 760:1996.

This document specifies requirements for classification of solid wire electrodes, tubular cored electrodes and electrode/flux combinations (all-weld metal deposits) for submerged arc welding of creep resisting and low-alloy elevated-temperature application steels. One electrode can be tested and classified with different fluxes. The solid wire electrode is also classified separately based on its chemical composition.
This document is a combined specification providing a classification system ba...view more

This document specifies requirements for classification of solid wire electrodes, tubular cored electrodes and electrode/flux combinations (all-weld metal deposits) for submerged arc welding of creep resisting and low-alloy elevated-temperature application steels. One electrode can be tested and classified with different fluxes. The solid wire electrode is also classified separately based on its chemical composition. This document is a combined specification providing a classification system bas...view more

This document specifies requirements for classification of fluxes for submerged arc welding and electroslag welding for joining and overlay welding using wire electrodes, tubular cored electrodes, and strip electrodes. NOTE This document was based on EN 760:1996.