This specification covers material having a nominal thickness from 0,05 mm to 0,15 mm, supplied either in the form of sheets or rolls.[
]The contents of the corrigendum of August 1995 have been included in this copy.

  • Standard
    24 pages
    English and French language
    sale 15% off

ISO TR 24971:2013 provides guidance in addressing specific areas of ISO 14971 when implementing risk management. This guidance is intended to assist manufacturers and other users of the standard to understand the role of international product safety and process standards in risk management, develop the policy for determining the criteria for risk acceptability, incorporate production and post-production feedback loop into risk management, differentiate between "information for safety" and "disclosure of residual risk", and evaluate overall residual risk.

  • Technical report
    12 pages
    English language
    sale 15% off

IEC 60793-1-54:2012 outlines a method for measuring the steady state response of optical fibres and optical cables exposed to gamma radiation. It can be employed to determine the level of radiation induced attenuation produced in Class B single-mode or Class A, category A1 and A2 multimode optical fibres, in either cabled or uncabled form, due to exposure to gamma radiation. This second edition cancels and replaces the first edition, published in 2003. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: launching conditions and optical sources have been reviewed and are better defined. Keywords: gamma radiation, optical fibres, optical cables

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    26 pages
    English and French language
    sale 15% off

This sheet of IEC 60371-3 applies to several types of rigid materials based on mica splittings or mica paper for commutator separators. These products shall be made from muscovite or phlogopite mica, built up from mica splittings or mica paper by the use of a suitable bonding medium.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN 60371 gives requirements for electrical insulating materials made from mica paper which is to be processed for built-up mica materials according to EN 60371-1, such as rigid flat mica materials, flexible mica materials, curable flexible mica materials and shaped pieces.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 60371 gives requirements for electrical insulating materials made by combining mica paper with glass fabric and bonding them together with a small amount of epoxy resin.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This sheet of IEC 60371-3 applies to several types of rigid materials based on mica splittings or mica paper for commutator separators. These products shall be made from muscovite or phlogopite mica, built up from mica splittings or mica paper by the use of a suitable bonding medium. They are supplied in the following forms:
– sheets in the dimensions in which they are pressed or after trimming;
– strips cut from sheets;
– commutator separators having the shapes and dimensions and in the conditions ordered
by the user. The normal manufacturing thicknesses lie between 0,3 mm and 2 mm.
Materials which conform to this specification meet established levels of performance.
However, the selection of material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Composed of mica splittings or mica paper, with or without reinforcement, bonded with a suitable binder and may be supplied as sheets or rolls. This specification covers material having a nominal thickness from 0,10 mm to 7 mm.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Defines the methods of test which are applicable to built-up mica materials, products based on them and mica paper. The main changes from the previous edition are as follows: a) All clauses re-numbered. b) Relevant template of ISO 67 has been added to this standard as Annex A. c) Clause 8: Tensile strength and elongation at break Procedure modified to give rate of movement instead of time limit. Different rate of movement for raw mica as opposed to reinforced and/or impregnated mica. d) Clause 11: Stiffness Size of test specimen revised. Wording modified so that standard covers materials using carriers other than woven glass cloth and materials that are 3-ply. Revision of terms machine direction and transverse direction. (These were incorrect in second edition (1987).) e) Clause 13: Elastic compression and plastic compression Tolerance on measurement of height of stack changed to within 0,01 mm. Times for change in pressure in procedure changed to 1 min. f) Clause 16: Electric strength Modified in line with Amendment 1 (1994) to the second edition (1987). Changes relate to latest edition of EN 60243-1. g) Clause 19: Detection of defects and conductive particles Revised subclause.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 60371 gives requirements for electrical insulating materials made from mica paper which is to be processed for built-up mica materials according to IEC 60371-1, such as rigid flat mica materials, flexible mica materials, curable flexible mica materials and shaped pieces. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 60371 gives requirements for electrical insulating materials made by combining mica paper with glass fabric and bonding them together with a small amount of epoxy resin. The material is supplied in a flexible state and is designed for use in conjunction with vacuum pressure impregnation (VPI) with compatible impregnates. The final cured properties will be primarily dependent on the VPI resin used. Two bond contents are specified: - low bond with a resin content of (8 ± 3) %; - medium bond with a resin content of (16 ± 3) %. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60371-3-1:2006 applies to several types of rigid materials based on mica splittings or mica paper for commutator separators. These products shall be made from muscovite or phlogopite mica, built up from mica splittings or mica paper by the use of a suitable bonding medium. They are supplied in the following forms:
- sheets in the dimensions in which they are pressed or after trimming;
- strips cut from sheets;
- commutator separators having the shapes and dimensions and in the conditions ordered by the user. The normal manufacturing thicknesses lie between 0,3 mm and 2 mm. This third edition of IEC 60371-3-1 replaces the second edition, published in 1984, and constitutes a technical revision. The main changes with regard to the previous edition concern the modification of clause numbers to align with clause numbering in the latest edition of IEC 60371-2:2004. Keywords: mica splittings or mica paper for commutator separators, muscovite or phlogopite mica

  • Standard
    21 pages
    English and French language
    sale 15% off

Gives definitions of terms used to describe built-up mica materials, products based on them and mica paper. It also deals with general requirements and conditions of supply. Changes in this new edition include: - a new Clause 2: Normative references; - under Clause 4: Description of material - new Subclause 4.2.1 to cover flexible mica material impregnated with B stage resin, - new Subclause 4.2.2 to cover flexible mica material, porous for post-impregnation; - a new Clause 5 covering general requirements and conditions of supply.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Defines the methods of test which are applicable to built-up mica materials, products based on them and mica paper. The main changes from the previous edition are as follows: a) All clauses re-numbered. b) Relevant template of ISO 67 has been added to this standard as Annex A. c) Clause 8: Tensile strength and elongation at break Procedure modified to give rate of movement instead of time limit. Different rate of movement for raw mica as opposed to reinforced and/or impregnated mica. d) Clause 11: Stiffness Size of test specimen revised. Wording modified so that standard covers materials using carriers other than woven glass cloth and materials that are 3-ply. Revision of terms machine direction and transverse direction. (These were incorrect in second edition (1987).) e) Clause 13: Elastic compression and plastic compression Tolerance on measurement of height of stack changed to within 0,01 mm. Times for change in pressure in procedure changed to 1 min. f) Clause 16: Electric strength Modified in line with Amendment 1 (1994) to the second edition (1987). Changes relate to latest edition of EN 60243-1. g) Clause 19: Detection of defects and conductive particles Revised subclause.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60371-3-5:2005 gives requirements for electrical insulating materials made by combining mica paper with glass fabric and bonding them together with a small amount of epoxy resin. The material is supplied in a flexible state and is designed for use in conjunction with vacuum pressure impregnation (VPI) with compatible impregnates. The final cured properties will be primarily dependent on the VPI resin used. Two bond contents are specified:
- low bond with a resin content of (8 ± 3) %;
- medium bond with a resin content of (16 ± 3) %. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This second edition cancels and replaces the first edition, published in 1992, and constitutes a technical revision. The main changes with regard to the previous edition include adjustments needed to align this standard with changes included in the latest edition of IEC 60371-2. Keywords: electrical insulating materials, mica paper, glass fabric, vacuum pressure impregnation (VPI)

  • Standard
    21 pages
    English and French language
    sale 15% off

IEC 60371-3-2:2006 gives requirements for electrical insulating materials made from mica paper which is to be processed for built-up mica materials according to IEC 60371-1, such as rigid flat mica materials, flexible mica materials, curable flexible mica materials and shaped pieces. This second edition cancels and replaces the first edition, published in 1991, and constitutes a technical revision. The main changes with regard to the previous edition include adjustments to align this standard with changes included in the latest edition of IEC 60371-2. Keywords: electrical insulating materials, mica paper

  • Standard
    25 pages
    English and French language
    sale 15% off

Gives definitions of terms used to describe built-up mica materials, products based on them and mica paper. It also deals with general requirements and conditions of supply. Changes in this new edition include: - a new Clause 2: Normative references; - under Clause 4: Description of material - new Subclause 4.2.1 to cover flexible mica material impregnated with B stage resin, - new Subclause 4.2.2 to cover flexible mica material, porous for post-impregnation; - a new Clause 5 covering general requirements and conditions of supply.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Defines the methods of test which are applicable to built-up mica materials, products based on them and mica paper. The main changes from the previous edition are as follows: a) All clauses re-numbered. b) Relevant template of ISO 67 has been added to this standard as Annex A. c) Clause 8: Tensile strength and elongation at break Procedure modified to give "rate of movement" instead of "time limit". Different rate of movement for raw mica as opposed to reinforced and/or impregnated mica. d) Clause 11: Stiffness Size of test specimen revised. Wording modified so that standard covers materials using carriers other than woven glass cloth and materials that are 3-ply. Revision of terms ""machine direction" and "transverse direction". (These were incorrect in second edition (1987).) e) Clause 13: Elastic compression and plastic compression Tolerance on measurement of height of stack changed to within 0,01 mm. Times for change in pressure in procedure changed to 1 min. f) Clause 16: Electric strength Modified in line with Amendment 1 (1994) to the second edition (1987). Changes relate to latest edition of IEC 60243-1. g) Clause 19: Detection of defects and conductive particles Revised subclause.

  • Standard
    55 pages
    English and French language
    sale 15% off

Gives definitions of terms used to describe built-up mica materials, products based on them and mica paper. It also deals with general requirements and conditions of supply. Changes in this new edition include: - a new Clause 2: Normative references; - under Clause 4: Description of material - new Subclause 4.2.1 to cover flexible mica material impregnated with B stage resin, - new Subclause 4.2.2 to cover flexible mica material, porous for post-impregnation; - a new Clause 5 covering general requirements and conditions of supply.

  • Standard
    11 pages
    English and French language
    sale 15% off

Covers minimum performance requirements for ventilated and electrically heated precision ovens for thermal endurance evaluation of electrical insulating materials and other appropriate applications. It covers ovens designed to operate over all or part of the temperature range from 20 K above room temperature up to 300°C. Two possible methods of achieving the required performance are described: a) where the required performance is achieved by precise control of temperature in a simple single chamber oven, i.e., upgraded versions of ovens conforming to IEC 60216-4-1, and, otherwise b)where the required performance is achieved by utilizing a second chamber (iso-box), mounted within the chamber of a single-chamber oven, the purpose of which is to reduce the magnitude of any temperature changes to an acceptable level whilst maintaining the required levels of air changes and circulation.

  • Standard
    33 pages
    English and French language
    sale 15% off

Covers the minimum requirements for ventilated and heated multi-chamber ovens used for thermal endurance evaluation of electrical insulation and of any other appropriate thermal conditioning application where the use of single-chamber ovens is inappropriate. Covers ovens designated to operate over all or part of the temperature range from 20 K above ambient to 500°C. Gives acceptance tests and in-service monitoring tests for both unloaded and loaded multi-chamber ovens and conditions of use.

  • Standard
    27 pages
    English and French language
    sale 15% off

This specification covers material having a nominal thickness from 0,05 mm to 0,15 mm, supplied either in the form of sheets or rolls.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Gives requirements for materials made by combining mica paper with a single polyester film and impregnating the mica paper with an epoxy resin. The material is supplied in a flexible state for final cure after application in the form of sheets or rolls.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Gives requirements for materials made by combining mica paper with glass fabric and impregnating the mica paper with an epoxy resin. The material is supplied in a flexible state for final cure after application in the form of sheets or rolls.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This specification covers material having a nominal thickness from 0,07 mm to 0,12 mm and supplied in roll form.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Gives requirements for several types of mica materials based on mica splittings or mica paper for application in electrical heating equipment.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to several types of rigid materials based on mica splittings or mica paper for commutator separators.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to mica papers which are to be processed for built-up mica materials. They are classified in several types depending on the nature of the mica minerals used and the manufacturing procedure.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Gives requirements for materials made by combining mica paper with glass fabric and bonding them together with an epoxy resin. The material is supplied in a flexible state and is designed for use in conjunction with vacuum pressure impregnation (VPI) with compatible impregnants.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Defines the methods of test which are applicable to built-up mica materials, products based on them and mica paper.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Gives definitions of terms used to describe built-up mica materials, products based on them and on mica paper.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off