This document provides specifications and test methods for unused and recycled mineral
insulating oils (see Clause 3 for definitions). It applies to mineral oil delivered according to the
contractual agreement, intended for use in transformers, switchgear and similar electrical
equipment in which oil is required for insulation and heat transfer. Both unused oil and
recycled oil under the scope of this document have not been used in, nor been in contact with
electrical equipment or other equ...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

IEC 60296:2020 provides specifications and test methods for unused and recycled mineral insulating oils. It applies to mineral oil delivered according to the contractual agreement, intended for use in transformers, switchgear and similar electrical equipment in which oil is required for insulation and heat transfer. Both unused oil and recycled oil under the scope of this document have not been used in, nor been in contact with electrical equipment or other equipment not required for manufacture...view more

    • sale 15% off
    • Standard
      82 pages
      English and French language

IEC 60312:2019 defines requirements for the characterization of unused modified esters or blends of unused esters used as insulating liquids for electrotechnical applications. It does not cover liquids that contain any proportion of used liquids. The liquids covered by this document are intended mainly for transformer applications. Unused modified/synthetized esters are derived from a natural or synthetic base, or are blends of both. This document covers a variety of ester liquids not covered by...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

IEC 63012:2019 defines requirements for the characterization of unused modified esters or blends of unused esters used as insulating liquids for electrotechnical applications. It does not cover liquids that contain any proportion of used liquids. The liquids covered by this document are intended mainly for transformer applications.
Unused modified/synthetized esters are derived from a natural or synthetic base, or are blends of both. This document covers a variety of ester liquids not covered b...
view more

    • sale 15% off
    • Standard
      41 pages
      English and French language

IEC 62961:2018 establishes the measurement of the interfacial tension between insulating liquid and water by means of the Du Noüy ring method close to equilibrium conditions. In order to obtain a value that provides a realistic expression of the real interfacial tension, a measurement after a surface age of approximately 180 s is recorded.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

IEC 62961:2018 establishes the measurement of the interfacial tension between insulating liquid and water by means of the Du Noüy ring method close to equilibrium conditions. In order to obtain a value that provides a realistic expression of the real interfacial tension, a measurement after a surface age of approximately 180 s is recorded.

    • sale 15% off
    • Standard
      41 pages
      English and French language

This document describes a test method for evaluating the oxidation stability of insulating
liquids in the delivered state under accelerated conditions regardless of whether or not
antioxidant additives are present. The duration of the test can be different depending on the
insulating liquid type and is defined in the corresponding standards (e.g. in IEC 60296,
IEC 61099, IEC 62770). The method can be used for measuring the induction period, the test
being continued until the volatile acidit...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

IEC 61125:2018 describes a test method for evaluating the oxidation stability of insulating liquids in the delivered state under accelerated conditions regardless of whether or not antioxidant additives are present. The duration of the test can be different depending on the insulating liquid type and is defined in the corresponding standards (e.g. in IEC 60296, IEC 61099, IEC 62770). The method can be used for measuring the induction period, the test being continued until the volatile acidity si...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

IEC TR 62697-3:2018(E) specifies a test method for the quantitative determination of elemental sulfur in used and unused insulating liquids over a 2 mg kg–1 to 400 mg kg–1 concentration range.

    • sale 15% off
    • Technical report
      24 pages
      English language

IEC TR 62697-2:2018(E) specifies a test method for the quantitative determination of total corrosive sulfur (TCS) in unused and used insulating liquids and solid matrices through the conversion of corrosive sulfur species to metal (copper, silver etc.) sulfides. The sulfides formed are quantitatively converted to sulfates; sulfates are determined through turbidity measurement or with ion chromatography.
The method is applicable with the following matrices:
a) Unused and used insulating liquids...
view more

    • sale 15% off
    • Technical report
      19 pages
      English language

IEC 61125:2018 describes a test method for evaluating the oxidation stability of insulating liquids in the delivered state under accelerated conditions regardless of whether or not antioxidant additives are present. The duration of the test can be different depending on the insulating liquid type and is defined in the corresponding standards (e.g. in IEC 60296, IEC 61099, IEC 62770). The method can be used for measuring the induction period, the test being continued until the volatile acidity si...view more

    • sale 15% off
    • Standard
      54 pages
      English and French language

IEC TS 60079-46:2017 specifies requirements for the design, construction, assembly, testing, inspection, marking, documenting and assessment of equipment assemblies for use in explosive atmospheres under the responsibility of the manufacturer of the equipment assembly. The requirements of this document apply to individual items according to the IEC 60079 series or ISO 80079 series that comprise the assembly and that have individual certificates. These individual items are then integrated as part...view more

    • sale 15% off
    • Technical specification
      33 pages
      English and French language

IEC 62766-4-1:2017(E) specifies the protocols, which apply to the following reference point interfaces identified in the architecture described in Annex B of IEC 62766-1:2017.
- The UNI interfaces, between the consumer domain and the network or service provider domains.
- The HNI interfaces, between the functional entities in the consumer network domain.
- Interfaces to external systems, which include DLNA networks in the consumer domain.

    • sale 15% off
    • Standard
      350 pages
      English language

This International Standard describes how the concentrations of dissolved gases or free
gases may be interpreted to diagnose the condition of oil-filled electrical equipment in service
and suggest future action.
This standard is applicable to electrical equipment filled with mineral insulating oil and
insulated with cellulosic paper or pressboard-based solid insulation. Information about
specific types of equipment such as transformers (power, instrument, industrial, railways,
distribution...
view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

IEC 60599:2015 is available as IEC 60599:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60599:2015 describes how the concentrations of dissolved gases or free gases may be interpreted to diagnose the condition of oil-filled electrical equipment in service and suggest future action. This standard is applicable to electrical equipment filled with mineral insulating oil and insulated with...view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

IEC 60836:2015 covers specifications and test methods for unused silicone liquids intended for use in transformers and other electrotechnical equipment. Besides the standard transformer applications there are other applications of silicone liquids, such like cable accessories, capacitors, electrical magnets etc. This edition includes the following major technical changes with regard to the second edition: a) classification of liquids according to IEC 61039 have been adapted with respect to the l...view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

IEC 60599:2015 is available as IEC 60599:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60599:2015 describes how the concentrations of dissolved gases or free gases may be interpreted to diagnose the condition of oil-filled electrical equipment in service and suggest future action. This standard is applicable to electrical equipment filled with mineral insulating oil and insulated wi...
view more

    • sale 15% off
    • Standard
      78 pages
      English and French language

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
-   flatness;
-   residual curvature;
-   edge camber;
-   deviation from the shearing line due to internal stresses;
-   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.

    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

IEC 60836:2015 covers specifications and test methods for unused silicone liquids intended for use in transformers and other electrotechnical equipment. Besides the standard transformer applications there are other applications of silicone liquids, such like cable accessories, capacitors, electrical magnets etc. This edition includes the following major technical changes with regard to the second edition:
a) classification of liquids according to IEC 61039 have been adapted with respect to the ...
view more

    • sale 15% off
    • Standard
      21 pages
      English and French language

IEC TS 60079-39:2015(E) specifies the construction, testing, installation and maintenance of Power-i apparatus and systems which utilise electronically controlled spark duration limitation to maintain an adequate level of intrinsic safety. This Technical Specification contains requirements for intrinsically safe apparatus and wiring intended for use in explosive atmospheres and for associated apparatus intended for connection to intrinsically safe circuits entering such atmospheres. This Technic...view more

    • sale 15% off
    • Technical specification
      51 pages
      English language
    • sale 15% off
    • Technical specification
      51 pages
      English language