The present document describes the principles for powering of Telecommunications Equipment (TE) in access
networks (both traditional copper based and Next Generation fibre and/or hybrid based) and contains requirements for
the powering systems, laying down:
• the characteristics of the input and output interfaces of the power units; the recommendations for TE power
protection, also regarding network integrity and public services availability requirements;
• the management data, necessary to...
view more

    • sale 15% off
    • Standard
      44 pages
      English language
    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      44 pages
      English language

The present document specifies test severities and methods for the verification of the required resistibility of equipment
according to the relevant environmental class.
The tests in the present document apply to stationary use of equipment at weatherprotected locations covering the
environmental conditions stated in ETSI EN 300 019-1-3 [1].

    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language

The present document provides speech transmission performance requirements for narrowband VoIP loudspeaking and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio terminals. DECT terminals are covered in ETSI EN 300 175-8 [i.6] and ETSI EN 300 176-2 [i.7]. In contrast to other standards which define minimum performance requirements it is the intention of the present document to specify terminal equipment requirements which enable ma...view more

    • sale 15% off
    • Standard
      50 pages
      English language
    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 10% off
    • Standardization document
      50 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP handset and headset terminals; it addresses all types of IP based terminals, including wireless and soft phones. DECT terminals are covered in ETSI EN 300 175-8 [i.9] and ETSI EN 300 176-2 [i.10]. In contrast to other standards which define minimum performance requirements it is the intention of the present document to specify terminal equipment requirements which enable manufacturers and service p...view more

    • sale 15% off
    • Standard
      53 pages
      English language
    • sale 15% off
    • Standard
      53 pages
      English language
    • sale 10% off
    • Standardization document
      53 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 3,4 kHz narrowband VoIP handset and headset terminals; it addresses all types of IP based terminals, including wireless and soft phones. DECT terminals are covered in ETSI EN 300 175-8 [i.6] and ETSI EN 300 176-2 [i.7]. In contrast to other standards which define minimum performance requirements it is the intention of the present document to specify terminal equipment requirements which enable manufacturers and servic...view more

    • sale 15% off
    • Standard
      54 pages
      English language
    • sale 15% off
    • Standard
      54 pages
      English language
    • sale 10% off
    • Standardization document
      54 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP loudspeaking and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio terminals. DECT terminals are covered in ETSI EN 300 175-8 [i.6] and ETSI EN 300 176-2 [i.7]. In contrast to other standards which define minimum performance requirements it is the intention of the present document to specify terminal equipment requirements which enabl...view more

    • sale 15% off
    • Standard
      50 pages
      English language
    • sale 15% off
    • Standard
      50 pages
      English language
    • sale 10% off
    • Standardization document
      50 pages
      English language
    • e-Library read for
      1 day

The present document specifies test methods and severities for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to stationary use at underground locations covering the environmental
conditions stated in ETSI EN 300 019-1-8 [1].

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Standard
      15 pages
      English language

The present document contains requirements and measurements methods for the physical interface "A" that is situated
between the power supply system(s) and the power consuming ICT equipment.
The nominal voltage at power interface "A" of ICT equipment defined in the present document is DC voltage -48 V.
The DC power can be supplied by a DC output power system (e.g. based on AC rectifiers on grid or DC/DC converters on
solar system, fuel cell, DC engine or fuel cell generator) and also directly...
view more

    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language

The present document defines measurement and monitoring of power, energy and environmental parameters for ICT equipment in telecommunications or datacenter or customer premises.
It defines the power, energy and environmental parameters monitoring interface of ICT equipment based on generic ETSI ES 202 336-1 [1] interface so that correlations can be made with ICT equipment parameters (traffic, flowrate, number of connected lines, radio setting, QoS KPI, etc.) in the network management system.
C...
view more

    • sale 15% off
    • Standard
      42 pages
      English language
    • sale 15% off
    • Standard
      42 pages
      English language
    • sale 10% off
    • Standardization document
      42 pages
      English language
    • e-Library read for
      1 day

The present document specifies test methods and severities for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to stationary use of equipment at non-weatherprotected locations
covering the environmental conditions stated in ETSI EN 300 019-1-4 [1].

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      22 pages
      English language

The present document will provide speech transmission performance requirements for narrowband VoIP loudspeaking
and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio
terminals.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech...
view more

    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 10% off
    • Standardization document
      51 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP handset and
headset terminals; it addresses all types of IP based terminals, including wireless and soft phones.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech performance as perceived by th...
view more

    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 10% off
    • Standardization document
      51 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP loudspeaking
and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio
terminals.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech...
view more

    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 10% off
    • Standardization document
      51 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 4 kHz narrowband VoIP handset and
headset terminals; it addresses all types of IP based terminals, including wireless and soft phones.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech performance as perceived by ...
view more

    • sale 15% off
    • Standard
      48 pages
      English language
    • sale 15% off
    • Standard
      49 pages
      English language
    • sale 10% off
    • Standardization document
      48 pages
      English language
    • e-Library read for
      1 day

The present document specifies test severities and methods for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to transportation of equipment covering the environmental conditions
stated in ETSI EN 300 019-1-2 [1].

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      22 pages
      English language

The present document specifies test severities and methods for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to storage of equipment covering the environmental conditions stated in
ETSI EN 300 019-1-1 [1].

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      22 pages
      English language

This document applies to the interface of equipment designed and intended to be connected
as a communication terminal to an information and communication technology (ICT)
network termination.
This document does not apply to:
• equipment covered by IEC 62368-1; and
• interfaces to other networks.
NOTE 1 An example of ‘other networks’ is a dedicated Home and Building Electronic Systems/Building
Automation and Control Systems HBES/BACS network covered by EN 50491-3.
This document specifies ...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

The present document will provide speech transmission performance requirements for narrowband VoIP loudspeaking
and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio
terminals.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech...
view more

    • sale 15% off
    • Standard
      50 pages
      English language
    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 10% off
    • Standardization document
      50 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP loudspeaking
and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio
terminals.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech...
view more

    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 10% off
    • Standardization document
      51 pages
      English language
    • e-Library read for
      1 day

The present document will provide speech transmission performance requirements for narrowband VoIP loudspeaking
and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio
terminals.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech...
view more

    • sale 15% off
    • Standard
      50 pages
      English language
    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 10% off
    • Standardization document
      50 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP handset and
headset terminals; it addresses all types of IP based terminals, including wireless and soft phones.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech performance as perceived by th...
view more

    • sale 15% off
    • Standard
      49 pages
      English language
    • sale 15% off
    • Standard
      50 pages
      English language
    • sale 10% off
    • Standardization document
      49 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP loudspeaking
and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio
terminals.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech...
view more

    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 15% off
    • Standard
      52 pages
      English language
    • sale 10% off
    • Standardization document
      51 pages
      English language
    • e-Library read for
      1 day

The present document provides speech transmission performance requirements for 4 kHz narrowband VoIP handset and
headset terminals; it addresses all types of IP based terminals, including wireless and soft phones.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech performance as perceived by ...
view more

    • sale 15% off
    • Standard
      49 pages
      English language
    • sale 15% off
    • Standard
      48 pages
      English language
    • sale 10% off
    • Standardization document
      49 pages
      English language
    • e-Library read for
      1 day

The present document contains requirements and measurements methods for the physical interface that is situated
between the power supply system(s) and the power consuming telecommunications and datacom (ICT) equipment; this
point is called interface "A" as defined in clause 4.
The purpose of the present document is to use a power supply system with the same characteristics for all
telecommunications and datacom (ICT) equipment defined in the area of application:
- to facilitate inter workin...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      36 pages
      English language
    • sale 15% off
    • Standard
      36 pages
      English language

The present document covers the EMC requirements for non-radio equipment intended to be used within a public telecommunications network, which provides telecommunications between Network Termination Points (NTPs) (i.e. excluding terminal equipment beyond the NTPs). Examples of such equipment are:
• Switching equipment. Such equipment includes:
- local telephone exchanges;
- remote switching concentrators;
- international switches;
- telex switches;
- network packet switches;
- base statio...
view more

    • sale 10% off
    • Standard
      54 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      54 pages
      English language
    • sale 15% off
    • Standard
      52 pages
      English language
    • sale 15% off
    • Standard
      51 pages
      English language

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP loudspeaking
and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio
terminals.
In contrast to other standards which define minimum performance requirements it is the intention of the present
document to specify terminal equipment requirements which enable manufacturers and service providers to enable good
quality end-to-end speech...
view more

    • sale 10% off
    • Standardization document
      52 pages
      English language
    • e-Library read for
      1 day

The present document specifies test methods and severities for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to stationary use of equipment at non-weatherprotected locations
covering the environmental conditions stated in ETSI EN 300 019-1-4 [1].

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      25 pages
      English language

The present document specifies test severities and methods for the verification of the required resistibility of equipment
according to the relevant environmental class.
The tests in the present document apply to stationary use of equipment at weatherprotected locations covering the
environmental conditions stated in ETSI EN 300 019-1-3 [1].

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      38 pages
      English language

The present document defines measurement and monitoring of power, energy and environmental parameters for ICT
equipment in telecommunications or datacenter or customer premises.
It defines the power, energy and environmental parameters monitoring interface of ICT equipment based on generic
ETSI ES 202 336-1 [1] interface so that correlations can be made with ICT equipment parameters (traffic, flowrate,
number of connected lines, radio setting, QoS KPI, etc.) in the network management system....
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 15% off
    • Standard
      38 pages
      English language

The present document applies to earthing and bonding of ICT equipment operating with DC voltage defined in ETSI
EN 300 132-2 [i.9], in order to facilitate the installation, operation and maintenance of equipment.
It also co-ordinates with the pre-conditions of the installation to achieve the following targets:
- safety from electrical hazards;
- reliable signal reference;
- satisfactory Electromagnetic Compatibility (EMC) performance.
The specification of ICT equipment and of the pre-condi...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      23 pages
      English language
    • sale 15% off
    • Standard
      25 pages
      English language

Harmonization of dimensions for mounting flanges and doors of 300mm and 600mm deep ETSI racks based on EN 300 119-2 and -3. Further improvement for cable duct access, cable management, installation and thermal management is proposed. The NWI takes the new standard IEC 60917-2-5 Annex A1 and A2 into account. A new part 6 should be produced for the series EN 300 119.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      16 pages
      English language

The new WI should detail requirements for subracks for use in harmonized racks/cabinets, as described in EN 300 119 7  [6]. The subrack will normally be supplied as a fully assembled structure, unequipped, partially equipped or fully equipped with plug-in units, etc.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      English language

The present document specifies test severities and methods for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to storage of equipment covering the environmental conditions stated in
EN 300 019-1-1 [1].

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      English language

The present document describes the principles for powering of Telecommunications Equipment (TE) in access networks and contains requirements for the powering systems, laying down:
• the characteristics of the input and output interfaces of the power units;
• the power back-up conditions for TE including a power unit;
• the management data, necessary to guarantee the availability of the service and to ensure the maintenance of the power units.
The present document takes into account the chara...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      26 pages
      English language
    • sale 15% off
    • Standard
      25 pages
      English language

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment being transported from one place to another after being made ready for dispatch from the manufacturer's works. The most commonly used methods of transportation have been taken into account, i.e. ground, wat...view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      English language

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment mounted for stationary use including periods of erection work, down time, maintenance and repair at weatherprotected locations defined in clause 5.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      English language

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed during storage. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %.
NOTE 1: Temporary storage during transport is included in part 1-2: Transportation.
NOTE 2: If the equipment is stored in its package, the environmental conditions apply to the packaged equipment.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      14 pages
      English language

The purpose of the present document is to define a class of environmental conditions and their severities to which equipment may be exposed. Only severe conditions, which may be harmful to the equipment, are included. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment mounted for stationary use including periods of erection work, down time, maintenance and repair at non-weatherprotected locati...view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Standard
      15 pages
      English language

The present document applies to earthing and bonding of ICT equipment installed in data and telecom centres and similar installations operating within the normal service voltage range up to 400 VDC defined in EN 300 132-3-1 [1]. Earthing and bonding network of the building (CBN), the bonding network of the equipment (SRPP), and the interconnection between these two networks are treated in the present document. It contributes to the standardization of telecommunication and datacom equipment insta...view more

    • sale 10% off
    • Standard
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      40 pages
      English language

The present document specifies test methods and severities for verification of the required resistibility of equipment according to the relevant environmental class. The tests defined in the present document apply to stationary use of equipment at non-weatherprotected locations covering the environmental conditions stated in EN 300 019-1-4 [1].

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      22 pages
      English language

The present document specifies test severities and methods for verification of the required resistibility of equipment according to the relevant environmental class. The tests defined in the present document apply to transportation of equipment covering the environmental conditions stated in EN 300 019-1-2 [1].

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

The present document specifies test severities and methods for the verification of the required resistibility of equipment according to the relevant environmental class. The tests in the present document apply to stationary use of equipment at weatherprotected locations covering the environmental conditions stated in EN 300 019-1-3 [1].

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

The present document applies to monitoring and control of AC inverter power systems for telecommunication equipment supply using 48 Vdc or 400 Vdc input. The present document does not apply to inverters included in UPS which are covered in ES 202 336-3 [i.8]. The back-up battery connected to the inverter power system is outside the scope of the present document; they are covered in the standard dealing with the control and monitoring of DC system (ES 202 336-2 [i.7]). The present document define...view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

The present document covers the EMC requirements for non-radio equipment intended to be used within a public telecommunications network, which provides telecommunications between Network Termination Points (NTPs) (i.e. excluding terminal equipment beyond the NTPs). Examples of such equipment are:
Switching equipment. Such equipment includes:
- local telephone exchanges;
- remote switching concentrators;
- international switches;
- telex switches;
- network packet switches;
- base station...
view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

to revise the EN300019-2-2 to: -Correct the reference basic standard for the free fall tests Align the requirement for “free fall” test with Telcordia GR63 issue 3

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

Scope of this work item is to revise the EN300753 to: -align it with the latest ISO 7779 standard (there are inconsistencies in clause 6 of EN300753) to include references on the National regulations on acoustic noise in Annex B for open air outdoor equipment

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

To prepare a new version of EN 300 132-2 taking in to account the related contributions presented and discussed during the EE#31, EE#32 and EE#33 meetings and contributions/proposals forwarded by correspondence two months before EE#34. Clarify the equipments covered by EN 300 132-2 and the applicability of EN 300 132-2 on equipment not located in telecom centers: Street cabinet, shelters selecting which requirement of the standard are applicable at this installation.

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

The present document covers the EMC requirements for non-radio equipment intended to be used within a public telecommunications network, which provides telecommunications between Network Termination Points (NTPs) (i.e. excluding terminal equipment beyond the NTPs). Examples of such equipment are:
• Switching equipment. Such equipment includes:
- local telephone exchanges;
- remote switching concentrators;
- international switches;
- telex switches;
- network packet switches;
- base statio...
view more

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      51 pages
      English language

The present document details requirements for miscellaneous racks and cabinets supplied unequipped. The miscellaneous racks/cabinets shall be used for housing telecommunication equipment forming part of a public telecommunication network installed either on the public telecommunication operators' sites or in the premises of operator's customers. The miscellaneous racks/cabinets shall be able to accommodate various equipments, e.g. subracks (see EN 300 119-4 [3]) and shall have provision for door...view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      English language

The present document details requirements for racks/cabinets which are supplied fully equipped. The racks/cabinets shall be used for housing telecommunication equipment forming part of a public telecommunication network installed either on the public telecommunication operators' sites, or in the premises of operators' customers.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      English language