iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

33.120 - Components and accessories for telecommunications equipment

ICS 33.120 Details

Components and accessories for telecommunications equipment

Bauteile und Zubehor fur Telekommunikationsgerate

Composants et accessoires pour materiel de telecommunication

Komponente in pribor za telekomunikacijsko opremo

General Information

Parent
33 - TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING
Sub-Items
33.120.01 - Components and accessories in general
33.120.10 - Coaxial cables. Waveguides
33.120.20 - Wires and symmetrical cables
33.120.30 - RF connectors
33.120.40 - Aerials
33.120.99 - Other components and accessories

e-Library Subscription

Create subscription and get permanent access to documents within 33.120 - Components and accessories for telecommunications equipment

Type
Monthly Subscription
for
seat
×
$ 227.19
$ 227.19

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
IEC
IEC 61196-13:2023(Main)
Coaxial communication cables - Part 13 - Sectional specification for semi-rigid cables with silicon dioxide dielectric

IEC 61196-13:2023 specifies the materials and cable construction for semi-rigid coaxial communication cables with silicon dioxide dielectric, IEC type designation, identification, marking and labelling, standard rating and characteristics, requirements of finished cables, quality assessment, delivery and storage, etc.
This part of IEC 61196 applies to semi-rigid coaxial communication cables with silicon dioxide dielectric and tubular outer conductor. These cables are intended for use in applications requiring extreme environments as well as in nuclear power plants, oil rigs and aircraft engines.

  • Standard
    26 pages
    English language
    sale 15% off
IEC
IEC 61196-1-119:2023(Main)
Coaxial communication cables - Part 1-119: Electrical test methods - RF power for coaxial cables and cable assemblies

IEC 61196-1-119:2023 provides test methods for RF power rating and power withstanding of RF coaxial cables and cable assemblies at specified frequency, temperature and altitude.
This document is applicable to RF coaxial cables and cable assemblies.

  • Standard
    24 pages
    English language
    sale 15% off
IEC
IEC 61196-8:2023(Main)
Coaxial communication cables - Part 8: Sectional specification for semi-flexible cables with fluoropolymer dielectric

IEC 61196-8:2023 specifies the materials and cable construction for semi-flexible coaxial communication cables with fluoropolymer dielectric, IEC type designation, identification, marking and labelling, standard rating and characteristics, requirements of finished cables, quality assessment, delivery and storage, etc.
This document applies to semi-flexible coaxial communication cables with fluoropolymer dielectric and tin soaked copper wire braid outer conductor. These cables are intended for use in mobile communication base station antenna systems, terrestrial microwave communication, radar systems and wireless equipment or other signal transmission equipment or units. It is read in conjunction with IEC 61196-1:2005.

  • Standard
    19 pages
    English language
    sale 15% off
IEC
IEC 61196-9:2023(Main)
Coaxial communication cables - Part 9: Sectional specification for flexible RF coaxial cables

IEC 61196-9:2023 specifies the materials and cable construction for RF flexible coaxial communication cables with solid or with semi-air-spaced dielectric, IEC type designation, identification, marking and labelling, standard rating and characteristics, requirements of finished cables, quality assessment, delivery and storage, etc.
This document applies to RF flexible coaxial communication cables for use in mobile communication systems, microwave test equipment and other fields. It is read in conjunction with IEC 61196-1:2005.

  • Standard
    18 pages
    English language
    sale 15% off
IEC
IEC 62783-1:2023(Main)
Twinax cables for digital communications - Part 1: Generic specification

IEC 62783-1:2023 specifies definitions, requirements and test methods of twinax cables used in digital communication systems: computer rooms, data centres, servers, etc. These cables are intended to be used indoors.
This document details the requirements and transmission characteristics for single twinax elements as well as multiple twinax elements within the same sheath, i.e. “twinax cable”. IEC 62783-1 ED2 is applicable to twinax cables and also twinax cable assemblies. This document is supplemented with family specifications that give additional requirements based on the specific application, for example, the minimum and maximum specified frequency of the cables.

  • Standard
    20 pages
    English language
    sale 15% off
IEC
IEC 61156-11:2023(Main)
Multicore and symmetrical pair/quad cables for digital communications - Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz - Horizontal floor wiring - Sectional specification

IEC 61156-11:2023 is available as IEC 61156-11:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61156-11:2023 describes cables intended to be used for single balanced pair (office, home, industrial) applications according to ISO/IEC 11801-1. An example of existing application is 1000BASE-T1, see ISO/IEC TR 11801-9906. The transmission characteristics of these cables are specified up to a frequency of 1,25 GHz and at a temperature of 20 °C. The T1-C type cable is specified up to 600 MHz, the T1-D type cable up to 1,25 GHz. Depending on the MICE environment and the installation conditions either unscreened or screened cables can be used. A blank detail specification can be found in Annex A.

  • Standard
    27 pages
    English language
    sale 15% off
SIST
SIST EN IEC 60966-3-3:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (Jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable (IEC 60966-3-3:2023)
EN IEC 60966-3-3:2023

This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as, type SMA(IEC 61169-15), type N (IEC 61169-16). It gives subfamily detail requirements and severities which shall be applied.
These cable assemblies are mainly used in the field of microwave and wireless equipment or other signal transmission equipment or units. The operating frequency is up to 18000 MHz.
The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants.
Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60966-3-4:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-4: Detail specification for semi-flexible cable assemblies (Jumper) - Frequency range up to 6 GHz, Type 50-141 semi-flexible coaxial cable (IEC 60966-3-4:2023)
EN IEC 60966-3-4:2023

This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as type 7-16 (IEC 61169-4), type 4,1-9,5 (IEC 61169-11), type S7-16 (IEC 61169-53) ，type 4,3-10 (IEC 61169-54). It gives subfamily detail requirements and severities which shall be applied.
These cable assemblies are mainly used in the field of mobile communication base station antenna system, terrestrial microwave communication and radar systems. The operating frequency is up to 6000 MHz.
The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants.
Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50289-1-2:2023(Main)
Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance
EN 50289-1-2:2023

This document details the test methods to determine the DC resistance characteristics of the conductors of cables used in analogue and digital communication systems. These characteristics are described by the conductor resistance, loop resistance and resistance unbalance.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-3-3:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (Jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable
SIST EN IEC 60966-3-3:2023

This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as, type SMA(IEC 61169-15), type N (IEC 61169-16). It gives subfamily detail requirements and severities which shall be applied. These cable assemblies are mainly used in the field of microwave and wireless equipment or other signal transmission equipment or units. The operating frequency is up to 18000 MHz. The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants. Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50289-1-2:2023(Main)
Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance
SIST EN 50289-1-2:2023

This document details the test methods to determine the DC resistance characteristics of the conductors of cables used in analogue and digital communication systems. These characteristics are described by the conductor resistance, loop resistance and resistance unbalance.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-3-4:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-4: Detail specification for semi-flexible cable assemblies (Jumper) - Frequency range up to 6 GHz, Type 50-141 semi-flexible coaxial cable
SIST EN IEC 60966-3-4:2023

This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as type 7-16 (IEC 61169-4), type 4,1-9,5 (IEC 61169-11), type S7-16 (IEC 61169-53) ，type 4,3-10 (IEC 61169-54). It gives subfamily detail requirements and severities which shall be applied. These cable assemblies are mainly used in the field of mobile communication base station antenna system, terrestrial microwave communication and radar systems. The operating frequency is up to 6000 MHz. The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants. Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61076-3-126:2023(Main)
Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connector for industrial environments with push-pull locking (IEC 61076-3-126:2023)
EN IEC 61076-3-126:2023

IEC 61076-3-126:2023 covers 5-pole rectangular connectors for electric power supply up to 16 A per pole. These connectors consist of fixed and free connectors, both either rewirable or non-rewirable. This document employs the general function principles of the push-pull connector housing system described in IEC 61076‑3‑117 with IP65/IP67 degree of protection according to IEC 60529 for harsh applications.
Male connectors have pin contacts with square cross-section with 1 mm side. Connectors according to this document are without breaking capacity COC according to IEC 61984, therefore they are not intended to be engaged or disengaged in normal use when live or under load.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61076-3-126:2023(Main)
Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
SIST EN IEC 61076-3-126:2023

IEC 61076-3-126:2023 covers 5-pole rectangular connectors for electric power supply up to 16 A per pole. These connectors consist of fixed and free connectors, both either rewirable or non-rewirable. This document employs the general function principles of the push-pull connector housing system described in IEC 61076‑3‑117 with IP65/IP67 degree of protection according to IEC 60529 for harsh applications. Male connectors have pin contacts with square cross-section with 1 mm side. Connectors according to this document are without breaking capacity COC according to IEC 61984, therefore they are not intended to be engaged or disengaged in normal use when live or under load.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 61156-1:2023(Main)
Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

IEC 61156-1:2023 is available as IEC 61156-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61156-1:2023 specifies the definitions, requirements and test methods of multicore, symmetrical pair and quad cables. This document is applicable to communication systems such as local area networks (LANs) and data communication cables. It is also applicable to cables used for industrial applications, customer premises wiring and generic cabling comprising installation cables and cables for work area wiring which are defined in ISO/IEC 11801 (all parts). The cables covered by this document are intended to operate with voltages and currents normally encountered in communication systems. While these cables are not intended to be used in conjunction with low impedance sources, for example the electric power supplies of public utility mains, they are intended to be used to support the delivery of low voltage remote powering applications including but not restricted to Power over Ethernet as specified in ISO/IEC/IEEE 8802-3.

  • Standard
    111 pages
    English and French language
    sale 15% off
IEC
IEC 61196-1-123:2023(Main)
Coaxial communication cables - Part 1-123: Electrical test methods - Test for attenuation constant of radiating cable

IEC 61196-1-123:2023 defines the test method to determine the attenuation constant of radiating coaxial communication cables that are intended for use in wireless communication systems such as tunnels, railways, highways, subways, elevators and other confined areas in which conventional antenna transmission is not satisfactory or even impossible.

  • Standard
    10 pages
    English language
    sale 15% off
IEC
IEC 60966-3-3:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable

IEC 60966-3-3:2023 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as, type SMA (IEC 61169-15), type N (IEC 61169-16). It gives subfamily detail requirements and severities to be applied. These cable assemblies are mainly used in the field of microwave and wireless equipment or other signal transmission equipment or units. The operating frequency is up to 18 000 MHz.

  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 60966-3-4:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-4: Detail specification for semi-flexible cable assemblies (Jumper) - Frequency range up to 6 GHz, Type 50-141 semi-flexible coaxial cable

IEC 60966-3-4:2023 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as, type SMA (IEC 61169-15), type N (IEC 61169-16). It gives subfamily detail requirements and severities to be applied.
These cable assemblies are mainly used in the field of mobile communication base station antenna system, terrestrial microwave communication and radar systems. The operating frequency is up to 6 000 MHz

  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 62807-3-10:2023(Main)
Hybrid communication cables - Part 3-10: Outdoor hybrid cables - Family specification for FTTA hybrid communication cables

IEC 62807-3-10:2023 is a family specification for FTTA (Fibre-To-The-Antenna) outdoor hybrid communication cables. It specifies the design and construction, rated values and characteristics, requirements and test methods, packaging and quality assurance, etc. The FTTA hybrid communication cables are typically but not only installed between the Base Band Unit (BBU) and Remote Radio Unit (RRU; or often called RRH – Remote Radio Head or AAU – Active Antenna Unit), and other scenario that supply electric current to optical communication equipment.

  • Standard
    35 pages
    English language
    sale 15% off
IEC
IEC 61156-7:2023(Main)
Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analogue communication cables

IEC 61156-7:2023 is available as IEC 61156-7:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61156-7:2023 specifies cables that can be used for various communication systems as well as for analogue systems, such as video, that exist or are under development and which may use as many as four pairs simultaneously. In this sense, this sectional specification provides the cable characteristics required by system developers to evaluate new systems as well as to enhance present systems. It covers a cable having four individually screened (S/FTP) pairs. The cable can be provided with a common screen over the cable core. This second edition cancels and replaces the first edition published in 2003 and Amendment 1:2012. This edition includes the following significant technical changes with respect to the previous edition:
a. align clauses with IEC 61156-1:2023;
b. remove the clause related to screening attenuation as it is no longer a test to be performed (replaced by coupling attenuation);
c. replace the IEC 62153-4-2 method (injection clamp) with IEC 61156-4-5 (absorbing clamp) for coupling attenuation measurement to be consistent with all other parts of the IEC 61156 series;
d. include IEC 62153-4-9 test method (triaxial) for coupling attenuation measurement to be consistent with all other parts of the IEC 61156 series;
e. incorporate the blank detail specification.

  • Standard
    54 pages
    English language
    sale 15% off
IEC
IEC 61156-8:2023(Main)
Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification

IEC 61156-8:2023 is available as IEC 61156-8:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61156-8:2023 relates to IEC 61156-1 and IEC 61156-7. The cables described herein are specified up to 1 200 MHz and are specifically designed to build work area cords. It covers a cable having four individually screened (S/FTP) pairs. The cable can be provided with a common screen over the cable core. The cables covered by this sectional specification are intended to operate with voltages and currents normally encountered in communication systems and support the delivery of DC low voltage remote powering applications. These cables are not intended to be used in conjunction with low impedance sources, for example the electric power supply of public utility mains. This second edition cancels and replaces the first edition published in 2009, and Amendment 1:2013. This edition includes the following significant technical changes with respect to the previous edition:
a. align clauses with IEC 61156-1:2023;
b. additional reference to IEC 62153-4-9 test method (triaxial) for coupling attenuation measurement to be consistent with all other parts of the IEC 61156 series;
c. incorporation of blank detail specification.

  • Standard
    26 pages
    English language
    sale 15% off
SIST
SIST EN IEC 62680-1-3:2023(Main)
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C(r) cable and connector specification (IEC 62680-1-3:2022)
EN IEC 62680-1-3:2022

IEC 62680-1-3:2022 defines the USB Type-C® receptacles, plug and cables. The USB Type-C Cable and Connector Specification is guided by the following principles:
- Enable new and exciting host and device form-factors where size, industrial design and style are important parameters
- Work seamlessly with existing USB host and device silicon solutions
- Enhance ease of use for connecting USB devices with a focus on minimizing user confusion for plug and cable orientation
The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices:
- USB Type-C receptacles, including electro-mechanical definition and performance requirements
- USB Type-C plugs and cable assemblies, including electro-mechanical definition and performance requirements
- USB Type-C to legacy cable assemblies and adapters
- USB Type-C-based device detection and interface configuration, including support for legacy connections
- USB Power Delivery optimized for the USB Type-C connector
The USB Type-C Cable and Connector Specification defines a standardized mechanism that supports Alternate Modes, such as repurposing the connector for docking-specific applications. IEC 62680-1-3:2022 cancels and replaces the fourth edition published in 2021 and constitutes a technical revision. This standard is the USB-IF publication Universal Serial Bus Type-C Cable and Connector Specification Revision 2.0. New release primarily for enabling Extended Power Range (EPR) and defining EPR cables aligning with USB Power Delivery Specification R3.1 V1.0. Also includes incorporation of all approved ECNs as the revision date plus editorial clean-up.

  • Standard
    392 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    412 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62680-1-2:2023(Main)
Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification (IEC 62680-1-2:2022)
EN IEC 62680-1-2:2022

IEC 62680-1-2:2022 specification defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and peripheral developers adequate flexibility for product versatility and market differentiation without losing backwards compatibility. This sixt edition cancels and replaces the fifth edition published in 2021 and constitutes a technical revision. Extended Power Range (EPR) including Adjustable Voltage Supply (AVS) has been added. This docuemnt is the USB-IF publication Universal Serial Bus Power Delivery Specification Revision 3.1, Version 1.1.

  • Standard
    710 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    745 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 62807-3:2023(Main)
Hybrid telecommunication cables - Part 3: Outdoor hybrid cables - Sectional specification

IEC 62807-3:2023 is a sectional specification for outdoor hybrid communication cables intended to be used externally in various applications. It specifies terms, definitions, symbols and abbreviated terms, the design and construction, rated values and characteristics, performance requirements and test methods, packaging and quality assurance.
Hybrid cables are designed for networks and customer premises cabling that transmit data, telecommunication, instrumentation, control and signalling services over optical fibres and/or broadband data over coaxial element, wire/pair/quad element and can have the option of supplying electrical current to a remote equipment.
In the IEC 62807 series, the current carrying elements are used only to supply power to the equipment within the communication network. They are not used for electricity distribution or transmission, nor for power supply to domestic appliances. The specific uses are defined in the relevant specification.
The relationship between each of the MICE classifications in ISO/IEC 11801-1, performance requirements and test methods of hybrid cables being proposed in a specific application are fully considered and aligned.

  • Standard
    14 pages
    English language
    sale 15% off
IEC
IEC 61076-3-126:2023(Main)
Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking

IEC 61076-3-126:2023 covers 5-pole rectangular connectors for electric power supply up to 16 A per pole. These connectors consist of fixed and free connectors, both either rewirable or non-rewirable. This document employs the general function principles of the push-pull connector housing system described in IEC 61076‑3‑117 with IP65/IP67 degree of protection according to IEC 60529 for harsh applications.
Male connectors have pin contacts with square cross-section with 1 mm side. Connectors according to this document are without breaking capacity COC according to IEC 61984, therefore they are not intended to be engaged or disengaged in normal use when live or under load.

  • Standard
    84 pages
    English and French language
    sale 15% off
CLC
EN IEC 62680-1-2:2020(Main)
Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification
SIST EN IEC 62680-1-2:2020

IEC 62680-1-2:2019 defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and peripheral developers adequate flexibility for product versatility and market differentiation without losing backwards compatibility. This fourth edition cancels and replaces the third edition published in 2018 and constitutes a technical revision. It is also identified as USB Power Delivery Specification, Revision 3.0, Version 1.2 This updated release of the USB PD specification was made to incorporate all the ECNs that were made to USB PD 3.0, V1.1. This makes a full completed printed specifications with all ECNs incorporated into a hard copy specification.

  • Standard
    541 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    608 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62037-8:2023(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation (IEC 62037-8:2022)
EN IEC 62037-8:2022

IEC 62037-8:2022 defines a radiated passive intermodulation (PIM) test to determine PIM levels generated by a device or object when it is exposed to RF radiation. This test can be conducted on any material or object and is not limited to devices designed to propagate RF signals. This test can be conducted as either a near field or far field test as defined by the test specification in an outdoor test site or in an anechoic test chamber.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62037-8:2022(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation
SIST EN IEC 62037-8:2023

IEC 62037-8:2022 defines a radiated passive intermodulation (PIM) test to determine PIM levels generated by a device or object when it is exposed to RF radiation. This test can be conducted on any material or object and is not limited to devices designed to propagate RF signals. This test can be conducted as either a near field or far field test as defined by the test specification in an outdoor test site or in an anechoic test chamber.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 61196-5:2022(Main)
Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables

IEC 61196-5:2022, which is a sectional specification, applies to coaxial cables for analogue and digital one- and two-way signal transmission, for example for cable networks for television signals, sound signals and interactive services in accordance with IEC 60728-1, IEC 60728-1-1, IEC 60728-101, IEC 60728-10, ISO/IEC 11801-1 and ISO/IEC 11801-4. This includes also the transmission of BCT signals provided by a CATV, MATV or SMATV cable networks.
This document specifies the test procedures and requirements for trunk and distribution cables for temperatures between −40 °C and +65 °C and in the frequency range of 5 MHz to 2 000 MHz.
This fourth edition cancels and replaces the third edition published in 2018. This edition includes the following significant technical changes with respect to the previous edition:
a. complete revision; b. cable identification and marking has been added; c. Table B.1, cable types have been added.

  • Standard
    39 pages
    English language
    sale 15% off
SIST
SIST EN IEC 62037-7:2023(Main)
Passive rf and microwave devices, intermodulation level measurement - Part 7: Field measurements of passive intermodulation (IEC 62037-7:2022)
EN IEC 62037-7:2022

IEC 62037-7:2022 defines test methods for reverse measurement of passive intermodulation (PIM) in systems of RF components deployed in the field. Field PIM measurements can be conducted on RF systems terminated into low PIM loads or on antenna feed systems that broadcast the test signals into the environment.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62037-7:2022(Main)
Passive rf and microwave devices, intermodulation level measurement - Part 7: Field measurements of passive intermodulation
SIST EN IEC 62037-7:2023

IEC 62037-7:2022 defines test methods for reverse measurement of passive intermodulation (PIM) in systems of RF components deployed in the field. Field PIM measurements can be conducted on RF systems terminated into low PIM loads or on antenna feed systems that broadcast the test signals into the environment.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61169-4:2023(Main)
Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 Ω (type 7-16)
EN IEC 61169-4:2022

IEC 61169-4:2008(E) provides information and rules for the preparation of detail specifications (DS) for type 7-16 R.F. coaxial connectors with  screw lock. It describes the interface dimensions for general purpose grade 2 connectors, dimensional details for standard test connectors, grade 0, together with gauging information and the mandatory tests selected from QC 22000 (IEC 61169-1), applicable to all DS relating to type 7-16 connectors.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62680-4-1:2022(Main)
Universal Serial Bus interfaces for data and power - Part 4-1: Universal Serial Bus 4 ™ Specification
SIST EN IEC 62680-4-1:2023

The specification is primarily targeted at peripheral developers and platform/adapter developers, but provides valuable information for platform operating system/BIOS/device driver, adapter independent hardware vendors/independent software vendors, and system OEMs. This specification can be used for developing new products and associated software.

  • Standard
    606 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    599 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 61196-10-1:2022(Main)
Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables with fluoropolymer dielectric

IEC 61196-10-1:2022 applies to coaxial communication cables described in IEC 61196-10, which specifies the requirements of semi-rigid coaxial communication cables with fluoropolymer dielectric and tubular outer conductors. Semi-rigid coaxial communication cables with fluoropolymer dielectric are widely used in mobile communication systems, microwave test equipment, radar, aerospace, electronic countermeasures and other fields.
This part of IEC 61196 is used in conjunction with IEC 61196-1 and IEC 61196-10, which determines the layout and style for detail specifications, based on the blank detail specification, that can be prepared by a national organization, a manufacturer, or a user.
This second edition cancels and replaces the first edition published in 2014. This edition includes the following significant technical changes with respect to the previous edition:
a. Title was changed to: Blank detail specification for semi-rigid cables with fluoropolymer dielectric.
b. Further changes in accordance with IEC 61196-10.

  • Standard
    11 pages
    English language
    sale 15% off
IEC
IEC 61196-10:2022(Main)
Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with fluoropolymer dielectric

IEC 61196-10:2022 specifies the materials and cable construction for semi-rigid coaxial communication cables with fluoropolymer dielectric, IEC type designation, identification, marking and labelling, standard rating and characteristics, requirements of finished cables, quality assessment, delivery and storage, etc. This part of IEC 61196 applies to semi-rigid coaxial communication cables with fluoropolymer dielectric and tubular outer conductor. Semi-rigid coaxial communication cables with fluoropolymer dielectric are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields.
This second edition cancels and replaces the first edition published in 2014. This edition includes the following significant technical changes with respect to the previous edition:
a. Title was changed to: Sectional specification for semi-rigid cables with fluoropolymer dielectric b. Dielectric: other fluoropolymer materials (such as FEP, PFA) were added c. Table 1 – Distinguishing number was added d. Table 2 – Rated temperature was added e. 7.4.8, Thermal cycling was deleted f. Annex A: Performance requirements of typical cables was added g. Annex B: Requirements for thermal shock was added

  • Standard
    25 pages
    English language
    sale 15% off
IEC
IEC 62037-8:2022(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation

IEC 62037-8:2022 defines a radiated passive intermodulation (PIM) test to determine PIM levels generated by a device or object when it is exposed to RF radiation. This test can be conducted on any material or object and is not limited to devices designed to propagate RF signals. This test can be conducted as either a near field or far field test as defined by the test specification in an outdoor test site or in an anechoic test chamber.

  • Standard
    22 pages
    English and French language
    sale 15% off
IEC
IEC 62037-7:2022(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 7: Field measurements of passive intermodulation

IEC 62037-7:2022 defines test methods for reverse measurement of passive intermodulation (PIM) in systems of RF components deployed in the field. Field PIM measurements can be conducted on RF systems terminated into low PIM loads or on antenna feed systems that broadcast the test signals into the environment.

  • Standard
    22 pages
    English and French language
    sale 15% off
CLC
EN IEC 62680-1-5:2019(Main)
Universal serial bus interfaces for data and power - Part 1-5: Common components - USB Audio 3.0 device class definition
SIST EN IEC 62680-1-5:2020

IEC 62680-1-5:2019 describes the minimum capabilities and characteristics an audio device shall support to comply with the USB. This document also provides recommendations for optional features. The Audio Device Class Definition applies to all devices or functions embedded in composite devices that are used to manipulate audio, voice, and sound-related functionality. This includes both audio data (analog and digital) and the functionality that is used to directly control the audio environment, such as Volume and Tone Control. The Audio Device Class does not include functionality to operate transport mechanisms that are related to the reproduction of audio data, such as tape transport mechanisms or CD-ROM drive control.

  • Standard
    154 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    149 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62680-1-6:2019(Main)
Universal serial bus interfaces for data and power - Part 1-6: Common components - USB Audio 3.0 device class definition basic functions
SIST EN IEC 62680-1-6:2020

The purpose of IEC 62680-1-6:2019 is to create a higher level of interoperability among Hosts and Audio Devices. By establishing a set of essential audio features, users can expect a consistent experience, Device manufacturers have a solid template to follow, and Host drivers may be simplified. The USB Audio Device Class Definition for Basic Audio Functions applies to all USB Audio Functions that are based on the Universal Serial Bus Device Class Definition for Audio Devices Release 3.0. It defines baseline audio functionality for all ADC 3.0 compliant Hosts and Devices.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62680-1-8:2019(Main)
Universal serial bus interfaces for data and power - Part 1-8: Common components - USB Audio 3.0 device class definition terminal types
SIST EN IEC 62680-1-8:2020

IEC 62680-1-8:2019 is to describe in detail all the Terminal Types that are supported by the Audio Device Class. This document is considered an integral part of the Audio Device Class Specification, although subsequent revisions of this document are independent of the revision evolution of the main Audio Device Class Specification. This is to easily accommodate the addition of new Terminal Types without impeding the core Audio Device Class Specification. The Audio Device Class Definition applies to all devices or functions embedded in composite devices. All audio signals inside an audio function start at an Input Terminal, pass through some Units, and leave the function through an Output Terminal. Units can manipulate the signal in various ways. Terminals represent the connections of the function to the outside world. As part of the Terminal descriptor, the wTerminalType field specifies the vendor’s suggested use of the Terminal. For example, a pair of speakers is a more suitable target for music output than a telephone line. This feature allows a vendor to ensure that applications use the device in a consistent and meaningful way.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 62680-4-1:2022(Main)
Universal Serial Bus interfaces for data and power - Part 4-1: Universal Serial Bus 4 ™ Specification

IEC 62680-4-1:2022 provides Universal Serial Bus 4™ Specification.
USB 3.1 and USB 3.2 were evolutionary steps to increase bandwidth. The goal for USB4 remains the same with the added goal of helping to converge the USB Type-C® connector ecosystem and minimize end-user confusion. Several key design areas to meet this goal are listed below:
• Offer display, data, and load/store functionality over a single USB Type-C connector.
• Retain compatibility with existing ecosystem of USB and Thunderbolt™ products.
• Define Port Capabilities for predictable and consistent user experience.
• Provide increased host flexibility to configure bandwidth, power management, and other performance-related parameters for system needs
This document contains USB4™ Specification, Version 1.0 with Errata and ECN through May 19, 2021.

  • Standard
    604 pages
    English language
    sale 15% off
  • Standard
    1314 pages
    English and French language
    sale 15% off
CLC
EN IEC 61169-64:2019(Main)
Radio frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 Ω (type 0,8)
SIST EN IEC 61169-64:2020

IEC 61169-64:2019, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for IEC 61169 (all parts) coaxial connectors with 0,8 mm coupling. The connectors are used with cables with characteristic impedance 50 Ω in an operating frequency range up to 145 GHz. The connectors are widely used in communications and measurements. It describes the interface dimensions for general purpose connectors with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all detail specifications relative to type 0,8 connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers all tests schedules and inspection requirements.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63138-1:2019(Main)
Multi-channel radio frequency connectors - Part 1: Generic specification - General requirements and test methods
SIST EN IEC 63138-1:2020

IEC 63138-1:2019 which is a generic specification, specifies general requirements for multi-channel radio-frequency connectors, including terms and definitions, design and construction, ratings and characteristics, climatic categories, IEC type designation, requirements and test procedures, quality assessment, marking, etc. It provides the basis for establishing the sectional specifications for various multi­channel radio­frequency connector types. This document applies to multi-channel radio-frequency connectors (called "connectors", hereinafter) for use in communications, electronics and other equipment.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-1-2:2019(Main)
Radio-frequency connectors - Part 1-2: Electrical test methods - Insertion loss
SIST EN IEC 61169-1-2:2020

IEC 61169-1-2:2019 provides test methods for the insertion loss of radio-frequency (RF) connectors. This document is applicable to cable RF connectors, microstrip RF connectors and RF connector adapters. It is also applicable to RF channels in multi-RF channel connectors and hybrid connectors which contain any combination of coaxial contact, optical fibres contact, and current-carrying electrical contact element.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62680-1-3:2022(Main)
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® cable and connector specification
SIST EN IEC 62680-1-3:2023

IEC 62680-1-3:2022 defines the USB Type-C® receptacles, plug and cables. The USB Type-C Cable and Connector Specification is guided by the following principles: - Enable new and exciting host and device form-factors where size, industrial design and style are important parameters - Work seamlessly with existing USB host and device silicon solutions - Enhance ease of use for connecting USB devices with a focus on minimizing user confusion for plug and cable orientation The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices: - USB Type-C receptacles, including electro-mechanical definition and performance requirements - USB Type-C plugs and cable assemblies, including electro-mechanical definition and performance requirements - USB Type-C to legacy cable assemblies and adapters - USB Type-C-based device detection and interface configuration, including support for legacy connections - USB Power Delivery optimized for the USB Type-C connector The USB Type-C Cable and Connector Specification defines a standardized mechanism that supports Alternate Modes, such as repurposing the connector for docking-specific applications. IEC 62680-1-3:2022 cancels and replaces the fourth edition published in 2021 and constitutes a technical revision. This standard is the USB-IF publication Universal Serial Bus Type-C Cable and Connector Specification Revision 2.0. New release primarily for enabling Extended Power Range (EPR) and defining EPR cables aligning with USB Power Delivery Specification R3.1 V1.0. Also includes incorporation of all approved ECNs as the revision date plus editorial clean-up.

  • Standard
    392 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    412 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 61196-1-326:2022(Main)
Coaxial communication cables - Part 1-326: Mechanical test methods - Hanger test

IEC 61196-1-326:2022 describes the test methods to evaluate the suitability of hangers to support a cable on an antenna tower, or on other constructions. This document also provides generic criteria to evaluate performance.

  • Standard
    12 pages
    English language
    sale 15% off
CLC
EN IEC 62680-1-2:2022(Main)
Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification
SIST EN IEC 62680-1-2:2023

IEC 62680-1-2:2022 specification defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and peripheral developers adequate flexibility for product versatility and market differentiation without losing backwards compatibility. This sixt edition cancels and replaces the fifth edition published in 2021 and constitutes a technical revision. Extended Power Range (EPR) including Adjustable Voltage Supply (AVS) has been added. This docuemnt is the USB-IF publication Universal Serial Bus Power Delivery Specification Revision 3.1, Version 1.1.

  • Standard
    710 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    745 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61726:2022(Main)
Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:2022)
EN IEC 61726:2022

This standard describes the measurement of screening attenuation by the reverberation chamber measurement method, also called mode stirred chamber method.
This standard is applicable to screening attenuation measurements of cable assemblies, cables, connectors, and passive microwave components, such as waveguides, phase shifters, diplexers/multiplexers, power dividers/combiners and etc.
Modern electronic equipments have shown a demand for methods for testing screening attenuation performance of microwave components over their whole frequency range. Convenient measurement methods have existed for lower frequencies and components of regular shape. These measurement methods are described in IEC 62153 series standards. For much higher frequencies and for components of irregular shape, the reverberation chamber method should be used. Theoretically, the reverberation chamber method has no upper limit of the measurement frequency, but it is limited by the quality and sensitivity of the measurement system, and the lower limit of the measurement frequency is restricted by the size of the reverberation chamber.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 61196-4:2022(Main)
Coaxial communication cables - Part 4: Sectional specification for radiating cables

IEC 61196-4:2022 applies to radiating coaxial communication cables, and specifies the terms and definitions, material and construction, IEC type designation, standard rating and characteristics, identification, marking and labelling, requirements of finished cables, quality assessment, delivery and storage, etc.
This fourth edition cancels and replaces the third edition published in 2015 This edition includes the following significant technical changes with respect to the previous edition:
a. rewrote "1 Scope" to be consistent with other blank detail specifications of coaxial cables; b. updated different standards in "Clause 2 Normative references"; c. added the definitions of uniformly radiating type cable, stop frequency band and link loss; d. added different materials and constructions in 4.2 to 4.5; e. added "Clause 5 IEC type designation"; f. added a detailed rated temperature range of different materials in "6.2 Rated temperature range"; g. added detailed frequencies in "6.3 Operating frequency range"; h. added "6.4 Stop frequency band" and "6.5 Radiating characteristics"; i. added different detail requirements or typical values in 8.2.4, 8.2.7, 8.2.8, 8.4.3 to 8.4.8; j. deleted "7.4.4 Ovality of outer conductor"; k. added "8.2.11 Link loss", "8.4.9 Adhesion of dielectric", "8.4.10 Shrinkage for insulations", "8.4.11 Maximum pulling force of cable";
i. used IEC 61196-1-123 and IEC 61196-1-124 in the electrical requirements to replace Annex A and Annex B respectively and deleted Annex A and Annex B; m. added "Figure A.1 Example of testing coupling loss around circumferential orientation of radiating cable (Y-Z)" in Annex A.

  • Standard
    83 pages
    English language
    sale 15% off
CLC
EN IEC 63137-1:2019(Main)
Standard test radio-frequency connectors - Part 1: Generic specification - General requirements and test methods
SIST EN IEC 63137-1:2020

IEC 63137-1:2019 defines general requirements for standard test radio frequency (RF) connectors (grade 0), including terms and definitions, ratings and characteristics, general requirements, test methods, quality assessment procedures, and etc. Standard test radio frequency (RF) connectors (grade 0) are intended to measure grade 1 and grade 2 RF connectors for electrical performances. Typically, a standard test radio frequency (RF) connector (grade 0) is an adapter with one end (normally a precision connector interface) which can be connected with measurement equipment and the other end (normally a standard test connector interface) which can be connected with grade 1 or grade 2 connectors. This specification applies to grade 0 standard test connectors (called connector, hereinafter). The corrigendum of January 2020 applies to the French language only.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
50