33.040 - Telecommunication systems

This document specifies a protocol for point-to-point transmission of alarms and faults, as well as communications monitoring, between a Supervised Premises Transceiver and a Receiving Centre Transceiver using the Internet Protocol (IP).
The protocol is intended for use over any network that supports the transmission of IP data. These include Ethernet, xDSL, GPRS, WiFi, UMTS and WIMAX.
The system performance characteristics for alarm transmission are specified in EN 50136-1.
The performance c...view more

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, t...view more

This European Standard specifies requirements for the following aspects of information technology cabling:
a)   installation specification, quality assurance documentation and procedures;
b)   documentation and administration;
c)   operation and maintenance.
This European Standard is applicable to all types of information technology cabling including generic cabling systems designed in accordance with the EN 50173 series.

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be adapted for manual techniques. Apart from in annex I, the...view more

The present document defines the Behaviour Types package of TTCN-3. TTCN-3 can be used for the specification of all types of reactive system tests over a variety of communication ports. Typical areas of application are protocol testing (including mobile and Internet protocols), service testing (including supplementary services), module testing, testing of APIs, etc. TTCN-3 is not restricted to conformance testing and can be used for many other kinds of testing including interoperability, robustn...view more

The present document specifies the control interfaces for TTCN-3 test system implementations. The TTCN-3 Control
Interfaces provide a standardized adaptation for management, test component handling and encoding/decoding of a test
system to a particular test platform. The present document defines the interfaces as a set of operations independent of a
target language.
The interfaces are defined to be compatible with the TTCN-3 standard (see clause 2). The interface definition uses the
CORBA I...view more

The present document defines a normative way of using ASN.1 as defined in Recommendations ITU-T X.680 [2], X.681 [3], X.682 [4] and X.683 [5] with TTCN-3. The harmonization of other languages with TTCN-3 is not covered by the present document.

The present document defines the Core Language of TTCN-3. TTCN-3 can be used for the specification of all types of
reactive system tests over a variety of communication ports. Typical areas of application are protocol testing (including
mobile and Internet protocols), service testing (including supplementary services), module testing, testing of CORBA®
based platforms, APIs, etc. TTCN-3 is not restricted to conformance testing and can be used for many other kinds of
testing including interop...view more

The present document defines the Extended TRI package of TTCN-3. TTCN-3 can be used for the specification of all types of reactive system tests over a variety of communication ports. Typical areas of application are protocol testing (including mobile and Internet protocols), service testing (including supplementary services), module testing, testing of CORBA based platforms, APIs, etc. TTCN-3 is not restricted to conformance testing and can be used for many other kinds of testing including inter...view more

The present document proposes an evolved version of the Green Abstraction Layer formulation capable of operating within ETSI NFV environments.

The present document provides speech transmission performance requirements for narrowband and wideband media gateways from a QoS perspective as perceived by the user. Media gateways can be network or home based, they may include a transcoding function. The present document covers the following types of IP-based media gateways:
• ATA (Analogue Terminal Adapter), home gateway IP to POTS
• ITA (ISDN Terminal Adapter), home gateway IP to ISDN
• IAD (Integrated Access device), home router includin...view more

The present document defines the mapping rules for W3C® XML Schema (as defined in [7] to [9]) to TTCN-3 as defined in ETSI ES 201 873-1 [1] to enable testing of XML-based systems, interfaces and protocols.

The present document aims at further simplifying end-user access to ICT devices, services, and applications by providing
recommended terms for basic and commonly-used ICT-related objects and activities, limited to those terms that end
users are commonly exposed to. Recommended terms are provided in five languages: English, French, German, Italian,
and Spanish (as spoken in their respective European countries).
The recommended terms apply to mobile ICT devices and mobile applications (whether...view more

This Technical Report describes the following:
a)   the functional elements and structure of the cabling, external to homes, supporting community antenna television (CATV) and master antenna television/satellite master antenna television (MATV/SMATV) networks in accordance with EN 60728-1;
b)   the location and accommodation of the home network interface (HNI) in accordance with EN 60728-1;
c)   requirements for additional cabling performance requirements (i.e. insertion loss slope between 47 MHz a...view more

This document addresses the mitigation and protection of telecommunications cabling from electromagnetic interference by describing:
a)   coupling mechanisms and possible countermeasures;
b)   assessment of the electromagnetic environment;
c)   filtering, isolation and surge protections measures.
Safety (electrical safety and protection, optical power, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by standards and regulation...view more

The present document defines the metrics and measurement methods for the energy efficiency of functional components
of NFV environment. The NFV functional components include Virtualised Network Functions (VNFs) and NFV
Infrastructure (NFVI) defined in NFV architecture framework as described in ETSI GS NFV 002 [i.1]. Management
and Orchestration (MANO) is not included as system under test, but will be eventually taken as test environment.
The measurement method described in the present docume...view more

The present document defines the mapping rules for W3C® XML Schema (as defined in [7] to [9]) to TTCN-3 as
defined in ETSI ES 201 873-1 [1] to enable testing of XML-based systems, interfaces and protocols.

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, t...view more

IEC PAS 63256:2020(E) defines the broadband fieldbus specification AUTBUS. AUTBUS implements real-time, high reliability and deterministic transmission and application for both industrial fieldbus data and ISO/IEC/IEEE 8802-3 Ethernet data by shared medium bus.
This document explains the structure and content of AUTBUS, and describes the definition and specification of Physical Layer (PhL) protocol / service, Data-link Layer (DLL) protocol / service and Application Layer (AL) protocol / service...view more