IEC/TR 62785:2013(E) reiterates all the key normative "shall" texts included in IEC 62430 that specify requirements and procedures to integrate environmental aspects into the design and development processes of electrical and electronic products, including combinations of products, and the materials and components of which they are composed. This report also conveys information on the experiences and best practices of environmental consciousness of fibre optics related products and subsystems. K...view more

    • sale 15% off
    • Technical report
      11 pages
      English language

This part of IEC 61280 is applicable to the measurement of attenuation and determination of
polarity and length of installed multimode and single-mode optical fibre cabling plant, terminated
with MPO connectors, using test equipment having an MPO interface. This cabling plant can
include multimode or single-mode optical fibres, connectors, adapters, splices, and other
passive devices. The cabling can be installed in a variety of environments including residential,
commercial, industrial, an...
view more

    • sale 10% off
    • Standard
      76 pages
      English language
    • e-Library read for
      1 day

IEC TR 62572-4:2020 is available as IEC TR 62572-4:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC/TR 62572-4:2020, which is a Technical Report, provides guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers. It includes details about handling receptacle style optical transceivers, internal structures of optical transceivers, information...
view more

    • sale 15% off
    • Technical report
      25 pages
      English language

IEC 61280-4-5:2020 is applicable to the measurement of attenuation and determination of polarity and length of installed multimode and single-mode optical fibre cabling plant, terminated with MPO connectors, using test equipment having an MPO interface. This cabling plant can include multimode or single-mode optical fibres, connectors, adapters, splices, and other passive devices. The cabling can be installed in a variety of environments including residential, commercial, industrial, and data ce...view more

    • sale 15% off
    • Standard
      149 pages
      English and French language
    • sale 15% off
    • Standard
      73 pages
      English language

This part of IEC 62496 defines the standard interface dimensions for a terminated waveguide
optical circuit board (OCB) assembly (referred to simply as "assembly") using single-row thirtytwo-
channel connectors for polymer waveguides connected with a symmetric PMT connector.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

IEC 62614-1:2020 describes the launch condition requirements used for measuring multimode attenuation in passive components and in installed cable plants. In this document, the fibre types that are addressed include category A1-OMx, where x = 2, 3, 4 and 5 (50 µm/125 µm), and A1-OM1 (62,5 µm/125 µm) multimode fibres, as specified in IEC 60793-2-10. The nominal test wavelengths detailed are 850 nm and 1 300 nm. This document can be suitable for multimode attenuation measurements for other multimo...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language
    • sale 15% off
    • Standard
      12 pages
      English language

IEC 62496-4-214:2020 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as "assembly") using single-row thirty-two-channel connectors for polymer waveguides connected with a symmetric PMT connector.

    • sale 15% off
    • Standard
      32 pages
      English and French language
    • sale 15% off
    • Standard
      16 pages
      English language

EN-IEC 61756-1 covers general information on fibre management system interfaces. It includes the definitions and rules under which a fibre management system interface is created and it provides also criteria to identify the minimum bending radius for stored fibres. This document allows both single-mode and multimode fibre to be used. Liquid, gas or dust sealing requirements at the cable entry area or cable element ending are not covered in this document.

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

IEC 61756-1:2019 covers general information on fibre management system interfaces. It includes the definitions and rules under which a fibre management system interface is created and it provides also criteria to identify the minimum bending radius for stored fibres. This document allows both single-mode and multimode fibre to be used. Liquid, gas or dust sealing requirements at the cable entry area or cable element ending are not covered in this document. This second edition cancels and replace...view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

IEC 62282-8-101:2020 addresses solid oxide cell (SOC) and stack assembly unit(s). It provides for testing systems, instruments and measuring methods to test the performance of SOC cell/stack assembly units for energy storage purposes. It assesses performance in fuel cell mode, in electrolysis mode and/or in reversible operation.
This document is intended for data exchanges in commercial transactions between cell/stack manufacturers and system developers or for acquiring data on a cell or stack ...
view more

    • sale 15% off
    • Standard
      159 pages
      English and French language

This Standard provides a reliability qualification test template for dynamic modules (DMs). The template describes the reliability qualification test items and provides information on requirements or options. Example test conditions are given for information purposes in Annex A. For reliability qualification purposes, some information about the internal components, parts and interconnections is needed. These internal parts are treated as black boxes. This document gives requirements for the eval...view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

IEC 62343-2-1:2019 provides a reliability qualification test template for dynamic modules (DMs). The template describes the reliability qualification test items and provides information on requirements or options. Example test conditions are given for information purposes in Annex A. For reliability qualification purposes, some information about the internal components, parts and interconnections is needed. These internal parts are treated as black boxes. This document gives requirements for the...view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

IEC 61756-1:2019 covers general information on fibre management system interfaces. It includes the definitions and rules under which a fibre management system interface is created and it provides also criteria to identify the minimum bending radius for stored fibres. This document allows both single-mode and multimode fibre to be used. Liquid, gas or dust sealing requirements at the cable entry area or cable element ending are not covered in this document. This second edition cancels and replace...view more

    • sale 15% off
    • Standard
      62 pages
      English and French language

IEC/TR 62343-6-11: 2019 which is a Technical Report, proposes a software and hardware interface for the optical multicast switch (MCS). This switch can be controlled by resident firmware within the interface that is intended to enable a user or host to retrieve the switch status and/or adjust relevant switch settings. The MCS is defined in IEC 62343-3-4. The technical information regarding MCS and its applications in dense wavelength division multiplexing (DWDM) systems is described in IEC TR 62...view more

    • sale 15% off
    • Technical report
      16 pages
      English language

IEC 62878-1:2019 specifies the generic requirements and test methods for device-embedded substrates. The basic test methods for printed board substrate materials and substrates themselves are specified in IEC 61189-3.
This part of IEC 62878 is applicable to device-embedded substrates fabricated by use of organic base material, which includes, for example, active or passive devices, discrete components formed in the fabrication process of electronic printed boards, and sheet-formed components.
...
view more

    • sale 15% off
    • Standard
      38 pages
      English and French language

IEC 62343-2-1:2019 provides a reliability qualification test template for dynamic modules (DMs). The template describes the reliability qualification test items and provides information on requirements or options. Example test conditions are given for information purposes in Annex A. For reliability qualification purposes, some information about the internal components, parts and interconnections is needed. These internal parts are treated as black boxes. This document gives requirements for the...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC 63033-3:2019 specifies measurement methods for the drive monitoring system that is specified in IEC TS 63033-1:2017.

    • sale 15% off
    • Standard
      32 pages
      English and French language