This document describes the communications reference architecture of nodes called "ITS station units" designed for deployment in intelligent transport systems (ITS) communication networks. The ITS station reference architecture is described in an abstract manner. While this document describes a number of ITS station elements, whether or not a particular element is implemented in an ITS station unit depends on the specific communication requirements of the implementation. This document also descr...view more

    • sale 15% off
    • Standard
      55 pages
      English language
    • sale 15% off
    • Draft
      55 pages
      English language
    • sale 15% off
    • Draft
      56 pages
      English language

This document defines the use cases and general requirements for supporting emergency services via P-ITS-S. Any automotive-related service providers can refer to this document for developing eCall service systems into eCall non-supportive vehicles. The P-ITS-S acts as a monitoring and data transmitting device which gathers a vehicle's speed, impact and airbag deployment signal to assess the accident occurrence and type of accident. Once gathered data has been determined as an accident, accident ...view more

    • sale 15% off
    • Standard
      17 pages
      English language
    • sale 15% off
    • Draft
      17 pages
      English language
    • sale 15% off
    • Draft
      13 pages
      English language

This document provides an EETS gap analysis with the aim to identify the need for new or updated standards to provide an enhanced support of the recast of the EU EETS legislation [29], [31], [32].

    • sale 10% off
    • Technical report
      36 pages
      English language
    • e-Library read for
      1 day

This document specifies the in-vehicle information (IVI) data structures that are required by different intelligent transport system (ITS) services for exchanging information between ITS Stations (ITS-S). A general, extensible data structure is specified, which is split into structures called containers to accommodate current-day information. Transmitted information includes IVI such as contextual speed, road works warnings, vehicle restrictions, lane restrictions, road hazard warnings, location...view more

    • sale 10% off
    • Technical specification
      58 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      78 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      76 pages
      English language
    • e-Library read for
      1 day

This document specifies the conceptual and logical data model in addition to the physical encoding formats for geographic databases for Intelligent Transport Systems (ITS) applications and services. This document includes a specification of potential contents of such databases (data dictionaries for Features, Attributes and Relationships), a specification of how these contents are to be represented, and how relevant information about the database itself can be specified (metadata). This document...view more

    • sale 15% off
    • Standard
      589 pages
      English language
    • sale 15% off
    • Draft
      589 pages
      English language

This document gives guidelines for providing mobility information according to user preference on demand, utilizing a variety of existing applications on nomadic devices related to different means of transport. This document defines an integrated mobility information platform as a service methodology to be integrated with a variety of mobile apps with respect to different transport modes. This document defines the following urban mobility applications: — guidance documents to facilitate the prac...view more

    • sale 15% off
    • Standard
      17 pages
      English language
    • sale 15% off
    • Draft
      17 pages
      English language
    • sale 15% off
    • Draft
      23 pages
      English language

This document specifies the test suite structure (TSS) and test purposes (TPs) for evaluating the conformity of on-board equipment (OBE) and roadside equipment (RSE) to ISO 12813. It provides a basis for conformance tests for dedicated short-range communication (DSRC) OBE and RSE to support interoperability between different equipment supplied by different manufacturers. ISO 12813 defines requirements on the compliance check communication (CCC) interface level, but not for the RSE or OBE interna...view more

    • sale 15% off
    • Standard
      72 pages
      French language
    • sale 15% off
    • Draft
      72 pages
      French language
    • sale 15% off
    • Standard
      70 pages
      English language
    • sale 15% off
    • Draft
      70 pages
      English language

This document specifies a generic position, velocity and time (PVT) service. It further specifies
the PVT service within the ITS station (ITS-S) facilities layer (ISO 21217) and its interface to other
functionalities in an ITS-S such as:
— ITS-S application processes (ITS-S-APs), defined in ISO 21217;
— the generic facilities service handler (FSH) functionality of the ITS station facilities layer, defined in
ISO/TS 17429.
This document specifies:
— a PVT service which, dependent on a spec...
view more

    • sale 10% off
    • Technical specification
      37 pages
      English language
    • e-Library read for
      1 day

The present document provides the specification of the Position and Time (PoTi) services. It includes functional and
operational requirements for the position and time data to support ITS Applications. In addition, it includes the
definition of syntax and semantics of messages exchanged between ITS Stations (ITS-Ss) to augment the position and
time accuracy. Finally, it specifies the facilities layer protocol in support of such message exchanges.

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      42 pages
      English language
    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      42 pages
      English language
    • sale 10% off
    • Draft
      42 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      42 pages
      English language

Like the other ENs of the whole series, this EN deals with the use of GNSS-based positioning terminals (GBPT) in road Intelligent Transport Systems (ITS). GNSS-based positioning means that the system providing position data, more precisely Position, Velocity and Time (PVT) data, comprises at least a GNSS receiver and, potentially, for performance improvement, other additional sensor data or sources of information that can be hybridized with GNSS data.
This new EN proposes testing procedures, ba...
view more

    • sale 10% off
    • Standard
      87 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      83 pages
      English language
    • e-Library read for
      1 day

EN 16803-1 addresses the final stage of the performance management approach, i.e. the assessment of the whole Road ITS system performance equipped with a given Positioning System, using the Sensitivity analysis method.
EN 16803-1 addresses the identification and the definition the positioning performance features and metrics required for Positioning System assessment.
This document gives definitions of the various items to be considered when specifying an Operational scenario and provides a me...
view more

    • sale 10% off
    • Standard
      57 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      54 pages
      English language
    • e-Library read for
      1 day

This document shall be considered as a complementary standard to EN 16803-2 that is intended to assessment of the performances of a GBPT placed in real-life or simulated road environments. This document is instead specifically targeting security attacks such as interferences, jamming, meaconing or spoofing. This document cannot be applied independently from EN 16803-2 that describes in details the general methodology of the assessment procedure.
This document provides normative information nece...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      57 pages
      English language
    • e-Library read for
      1 day

This document defines an information security framework for all organizational and technical entities
of an EFC scheme and for the related interfaces, based on the system architecture defined in ISO 17573-1.
The security framework describes a set of security requirements and associated security measures.
Annex D contains a list of potential threats to EFC systems and a possible relation to the defined
security requirements. These threats can be used for a threat analysis to identify the rele...
view more

    • sale 10% off
    • Standard
      144 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      159 pages
      English language
    • e-Library read for
      1 day

This document specifies the in-vehicle information (IVI) data structures that are required by different intelligent transport system (ITS) services for exchanging information between ITS Stations (ITS-S). A general, extensible data structure is specified, which is split into structures called containers to accommodate current-day information. Transmitted information includes IVI such as contextual speed, road works warnings, vehicle restrictions, lane restrictions, road hazard warnings, location...view more

    • sale 15% off
    • Technical specification
      48 pages
      English language
    • sale 15% off
    • Draft
      48 pages
      English language

This project specifies the fifth part of the DATEX II European Standard which deals with the one or more publication sub-model(s) within the DATEX II model that support the exchange of measured and elaborated information.
These publications are intended to support the exchange of informational content from the organisation having the measures and creating elaborated data to other organisations providing ITS services or onward information exchange. It also includes the exchange of static informa...
view more

    • sale 10% off
    • Standard
      86 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      82 pages
      English language
    • e-Library read for
      1 day

This document defines an additional data concept that may be transferred as an ‘optional additional data concept’ as defined in EN 15722 eCall MSD, that may be transferred from a vehicle to a PSAP in the event of a crash or emergency via an eCall communication session.
The purpose of this document is simply to enable the existing MSD to house multiple OADs. This is achieved by providing a short optional additional data concept, which facilitates the inclusion of multiple additional datasets wit...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies the standard data concepts that comprise the "Minimum Set of Data" (MSD) to be transferred from a vehicle to a 'Public Safety Answering Point' (PSAP) in the event of a crash or emergency via an 'eCall' communication transaction.
Optional additional data concepts may also be transferred.
The communications media protocols and methods for the transmission of the eCall message are not specified in this document.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day

This document specifies a generic position, velocity and time (PVT) service. It further specifies the PVT service within the ITS station (ITS-S) facilities layer (ISO 21217) and its interface to other functionalities in an ITS-S such as: — ITS-S application processes (ITS-S-APs), defined in ISO 21217; — the generic facilities service handler (FSH) functionality of the ITS station facilities layer, defined in ISO/TS 17429. This document specifies: — a PVT service which, dependent on a specific im...view more

    • sale 15% off
    • Technical specification
      28 pages
      English language
    • sale 15% off
    • Draft
      28 pages
      English language

Unchanged with respect to the current edition EN 50128:2011.
Scope of the amendment:
- Alignment with EN 50126-1:2017, EN 50126-2:2017 and EN 50129:2018 together with minor corrections

    • sale 10% off
    • Amendment
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      13 pages
      English language
    • e-Library read for
      1 day