37.100.10 - Reproduction equipment
ICS 37.100.10 Details
Reproduction equipment
Reprogerate
Matériel de reproduction
Reprodukcijska oprema
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 37.100.10 - Reproduction equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
IEC TR 62899-302-5:2023 provides the significant characteristics, parameters and system properties that are relevant for functional inkjet printing for printed electronics. Where possible, existing measurement standards and specifications are cited.
- Technical report15 pagesEnglish languagesale 15% off
This document defines a measurement method for the evaluation of distortions in the macroscopic uniformity of printed areas that are oriented in the horizontal and vertical direction, such as streaks and bands. It provides requirements for the layout of the test form, the use of a colour measurement device taking measurements in a 2D sampling grid, and the formula to compute the Macro-Uniformity-Score. This document does not cover any non-adjacent or non-horizontal nor vertical patterns. Due to the used spatial frequency, the Macro-Uniformity-Score does not measure high frequency (fine) patterns such as missing nozzles.
- Technical specification7 pagesEnglish languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
This document applies to processless lithographic plates and specifies evaluation methods for lithographic plate characteristics, on-press development performance, usability and print image quality.
It specifies measurement conditions for materials and equipment and provides guidelines for the selection of suitable processless lithographic plates by a printing organization and requirements for comparative assessment tests.
The assessment of waterless lithographic plates is out of scope of this document.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard29 pagesEnglish languagesale 15% off
- Draft29 pagesEnglish languagesale 15% off
This document defines procedures to measure and compare the colour gamuts of RGB and CMYK printing processes.
It is not applicable to other printing processes.
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification16 pagesEnglish languagesale 15% off
- Technical specification16 pagesEnglish languagesale 15% off
- Technical specification16 pagesEnglish languagesale 15% off
This document specifies a method of automated colour profile distribution to large format inkjet printers. This document applies to digital colour printers and their printer controllers for which ICC colour management is necessary or desired. This document also applies to the print settings profile providers. The extent of automation covered includes the printer controller acquiring information about the overall situation, connecting to a print settings profile provider on the Internet, determining the best possible profile to download (if it exists), and downloading and installation of the profile. This document covers general concepts and procedures and does not go into a level of detail necessary to establish syntactic or semantic interoperability. This document covers ICC version 4 output profiles as specified by ISO 15076-1, but does not cover device link profiles.
- Standard8 pagesEnglish languagesale 15% off
This document defines procedures to measure and compare the colour gamuts of RGB and CMYK printing processes. It is not applicable to other printing processes.
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification16 pagesEnglish languagesale 15% off
- Technical specification16 pagesEnglish languagesale 15% off
- Technical specification16 pagesEnglish languagesale 15% off
This document specifies the width, length and thickness of metal lithographic printing plates (referred to hereafter as “plates”). For plates to be used in computer to plate (CtP) applications, flatness, edge straightness and burr requirements are also included. These requirements are applicable to unprocessed plates.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard12 pagesEnglish languagesale 15% off
- Draft12 pagesEnglish languagesale 15% off
This document applies to processless lithographic plates and specifies evaluation methods for lithographic plate characteristics, on-press development performance, usability and print image quality. It specifies measurement conditions for materials and equipment and provides guidelines for the selection of suitable processless lithographic plates by a printing organization and requirements for comparative assessment tests. The assessment of waterless lithographic plates is out of scope of this document.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard29 pagesEnglish languagesale 15% off
- Draft29 pagesEnglish languagesale 15% off
This document (all parts) specifies methods to determine chemical emission rates of analytes from ICT & CE equipment during intended operation in an Emission Test Chamber (ETC). This document (all parts) includes specific methods for equipment using consumables, such as printers, and equipment not using consumables, such as monitors and PC’s. Part 1 specifies the methods to determine the emission rates of VOC and carbonyl compounds, ozone, particulate matter, fine particles (FP) and ultra-fine particles (UFP) from electronic equipment using consumables. The methods comprise preparation, sampling (or monitoring) in a controlled ETC, storage and analysis, calculation and reporting of emission rates. Part 1 has two different methods for the determination of emission rates of VOC and carbonyl compounds. The two methods use two different emission models, the quasi-equilibrium model (QEM) and the constant emission model (CEM) respectively, to determine the emission rates of VOC and carbonyl compounds during the pre-operating phase. The quasi-equilibrium model method has been developed with hard copy devices for office or home use in mind whose energy-saving modes automatically activate during most intervals between operations. The calculation of emission rates during the pre-operating phase is based on the quasi-equilibrium assumption as shown in Annex C. The emission rates determined with this method can be used to compare equipment in the same class since test procedures are specified more narrowly than the other method (CEM). The constant emission model (CEM) has been developed for hard copy devices whose energy-saving modes have such a negligible effect on the determination of emission rates of VOC and carbonyl compounds that the generalised constant emission model shown in Annex D can be used for the determination of their emission rates during the pre-operating phase. This method presents more flexible test procedures than the QEM. Due to such features of this method, it may be used for hard copy devices whose idling mode usually lasts throughout intervals between operations, such as large hard copy devices used professionally. It may also be used for various equipment having different functions and structure for its intended use and the determination of carbonyl compounds requiring longer sampling duration due to a lack of sensitivity. Annex A specifies monochrome and colour print patterns for use in the operating phase of EUT using consumables. The operational readiness of AMS is confirmed according to Annex B. Predictions of “real indoor” concentrations from the determined emission rates are outside the scope of this document.
- Standard54 pagesEnglish languagesale 15% off
- Draft57 pagesEnglish languagesale 15% off
This document establishes terms, symbols, notations and a framework for characterizing toner and ink cartridges used in printing devices that have a digital input printing path, including multi-function devices. This document is intended for equipment used in office environments. It primarily provides a foundation for measuring, evaluating, or specifying characteristics of such toner and ink cartridges. The terms, symbols, notations and framework established herein can be applied to such cartridges. The characterizations associated with the terms, symbols, notations, and framework established herein are specified throughout the ISO/IEC 29142 series.
- Standard30 pagesEnglish languagesale 15% off
- Draft30 pagesEnglish languagesale 15% off
This document specifies the width, length and thickness of metal lithographic printing plates (referred to hereafter as “plates”). For plates to be used in computer to plate (CtP) applications, flatness, edge straightness and burr requirements are also included. These requirements are applicable to unprocessed plates.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard12 pagesEnglish languagesale 15% off
- Draft12 pagesEnglish languagesale 15% off
This document specifies a method for measuring productivity of digital copying devices and multifunctional devices with various copying modes and a single one-sided original. The document is applicable to digital copying devices and multifunctional devices. The document is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. This document includes instructions for the creation of test charts, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements. This document is not intended to replace manufacturer's rated speeds.
- Standard31 pagesEnglish languagesale 15% off
- Draft31 pagesEnglish languagesale 15% off
This document specifies a method for measuring the digital printing productivity of digital printing devices with various office applications and print job characteristics. This document is applicable to digital printing devices, including single-function and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices. It allows for the comparison of the productivity of machines operating in various available modes (simplex, duplex, size of substrates, etc.) and office applications when the test system environment, operating modes, and job mix for each machine are held identical. This document includes test files, test setup procedure, test runtime procedure, and the reporting requirements for the digital printing productivity measurements. This document is not intended to be used for devices which are not able to print on a media size of A4/8,5” × 11” or for devices which are not able to collate multiple copies of a print. This document is not intended to replace manufacturer's rated speeds.
- Standard61 pagesEnglish languagesale 15% off
- Draft61 pagesEnglish languagesale 15% off
This document specifies a method for measuring the digital copying productivity of digital copying devices and multifunctional devices with various copying modes. It is applicable to digital copying devices and multifunctional devices equipped with automatic document feeder (ADF) and collating function. This document is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. It allows comparison of the throughput copying rates for a machine operated in various available operating modes (simplex, duplex, size of substrates, 2-up, etc.) and various available digital image processing configurations. This document includes test files, test setup procedures, test procedures, and reporting requirements for digital copying productivity measurements. This document is not intended to be used for devices which are not able to copy on a media size of A4/8,5” × 11”, devices that do not have an ADF, or devices which are not able to collate multiple copies of original prints from a test set. This document is not intended to replace manufacturer's rated speeds.
- Standard40 pagesEnglish languagesale 15% off
- Draft39 pagesEnglish languagesale 15% off
This document specifies a method for determining scanning productivity by measuring "scanning speed", "scan to network folder speed" and "scan to PC speed". It includes test files, test setup procedure, test procedure and the reporting requirements for the scanning productivity measurements. This document is applicable to scanning devices including but not limited to multi-function devices, networked scanners and single-function scanners of any underlying scanning technology. This document is applicable to devices which are able to scan a media size of A4/8,5" × 11" and which have an automatic document feeder (ADF). It is also applicable to devices which have the ability to scan to network folder, or folder on PC and do not require, but can use, other application programs on a computer or another device to perform a scanning job. This document does not apply to testing and measurement of scan to USB, scan to local hard drive or other storage medium that is part of or plugged into the scanner. This document is not intended to be used for image quality measurement, document or record management of any scanned images.
- Standard32 pagesEnglish languagesale 15% off
- Draft32 pagesEnglish languagesale 15% off
IEC 62899-302-3:2021(E) specifies in-flight imaging methods for the measurement of the direction of ink drops jetted from inkjet print-heads using drop watchers. It does not apply to holographic or other interference techniques, or to any method assessing deposited ink drops. It is specific to drop-on-demand type inkjet print-heads (used in printed electronics equipment).
- Standard20 pagesEnglish languagesale 15% off
The scope of this document is limited to the evaluation of ink cartridge page yield for ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated printheads) for colour inkjet print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain inkjet printer components. Both liquid and solid ink products can be tested using this document. This document is only intended for the measurement of ink cartridge page yield when printing on plain paper. No other claims can be made from this testing regarding quality, reliability, etc. This document can be used to measure the yield of any cartridge that is used in a significant amount during the printing of the test page suite defined in ISO/IEC 24712. This document is not for use with printers whose minimum printable size is equal to or greater than A3 or for printers designed or configured to print photos (for example, maximum printable size less than A4 or a printer configuration intended for photo-only printing). In addition, it only applies to drop-on-demand printing systems. NOTE Integrated ink cartridges is a cartridge that includes at least: an ink containment part, an ink deposition mechanism and an ink transport part (see ISO/IEC 29142-1).
- Standard30 pagesEnglish languagesale 15% off
- Draft29 pagesEnglish languagesale 15% off
This document specifies the Contrast?Resolution test chart, the requirements on the printing process needed to reproduce this test chart, the required characteristics of a high resolution scanner needed to digitize the information reproduced on printed test charts, and the requirements on the interpretation of this digitized data. It also specifies the resolution-score method for evaluating the perceptual resolution of printed material using the Contrast?Resolution test chart. The procedure specified in this document is intended for a characterization of the perceived resolution of a graphic arts production printing system using the Contrast?Resolution test chart.
- Technical specification35 pagesEnglish languagesale 15% off
- Draft37 pagesEnglish languagesale 15% off
- Standard2 pagesEnglish languagesale 15% off
- Draft2 pagesEnglish languagesale 15% off
ISO 21632 provides directions for measuring and calculating the electricity consumption of any format of digital production press, whose modes, other than production printing mode, play a significant role in the comprehensive energy consumption. It excludes digital presses designed to print substrates other than paper or plastic and conventional printing presses fitted with digital inkjet printing heads. It can be used to compare the energy efficiency figures for different machine combinations: best-quality (slowest), highest-productivity (fastest) or other alternative combinations.
- Standard37 pagesEnglish languagesale 15% off
- Standard43 pagesEnglish languagesale 10% offe-Library read for1 day
The scope of this document is limited to the evaluation of black ink cartridge page yield for ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated printheads) for monochrome inkjet print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain inkjet printer components. Both liquid and solid ink products can be tested using this document. This document is only intended for the measurement of ink cartridge page yield when printing on plain paper. No other claims can be made from this testing regarding quality, reliability, etc. This document can be used to measure the yield of any cartridge that is used in a significant amount during the printing of the test page defined in ISO/IEC 19752. This document is not for use with printers whose minimum printable size is equal to or greater than A3 or for printers designed or configured to print photos (for example, maximum printable size less than A4 or a printer configuration intended for photo only printing). In addition, this document only applies to drop on demand printing systems. NOTE Integrated ink cartridge is a cartridge that includes at least: an ink containment part, an ink deposition mechanism and an ink transport part (see ISO/IEC 29142-1).
- Standard19 pagesEnglish languagesale 15% off
This document provides directions for measuring and calculating the electricity consumption of any format of digital production press, whose modes, other than production printing mode, play a significant role in the comprehensive energy consumption. It excludes digital presses designed to print substrates other than paper or plastic and conventional printing presses fitted with digital inkjet printing heads. It can be used to compare the energy efficiency figures for different machine combinations: best-quality (slowest), highest-productivity (fastest) or other alternative combinations.
- Standard37 pagesEnglish languagesale 15% off
- Standard43 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines methods for the objective measurement of the print quality characteristics that contribute to the perceived resolution of reflection mode monochrome printed pages produced by digital electro-photographic printers. The measurement methods of this document are derived from several existing techniques for the assessment of an imaging system's resolution characteristics. Each of these measurement methods is intended for the engineering evaluation of a printing system's perceived resolution and is not intended to be used for purposes of advertising claims. The methods of this document are applicable only to monochrome prints produced in reflection mode by electro-photographic printing technology. This document is intended for monochrome printers utilizing PostScript®[1] interpreters capable of accepting PostScript and encapsulated PostScript (EPS) jobs. [1] PostScript® and Encapsulated PostScript® are registered trademarks for freely usable page description formats controlled and defined by Adobe Systems Incorporated. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO/IEC.
- Standard87 pagesEnglish languagesale 15% off
This Standard (all parts) specifies methods to determine chemical emission rates of analyte from ICT & CE equipment during intended operation in an Emission Test Chamber (ETC). This Standard (all parts) includes specific methods for equipment using consumables, such as printers, and equipment not using consumables, such as monitors and PC's. Part 2 specifies the methods to determine chemical emission rates of analyte from electronic equipment not using consumables. The methods comprise preparation, sampling (or monitoring) in a controlled ETC, storage and analysis, calculation and reporting of emission rates. Examples of EUT that do not use consumables are: — Monitors and TV sets (CRT, Plasma, LCD, Rear projector, Beamer). — Video (VCR, DVD Player/Recorder, Camcorder). — SAT Receiver (Set-Top Box). — Audio units (CD Player/Recorder, Home theatre Systems, Audio Home Systems, Micro-/Mini, Midi Systems, Amplifier, Receiver). — Portable Audio (CD Player, MP 3 Player, Radio recorder, Clock radio, etc.). — Computer (desktop, tower, server), portable computers (Notebooks). The emission rates determined with this method may be used to compare equipment in the same class. Predictions of "real indoor" concentrations from the determined emission rates are outside the scope of this Standard.
- Standard12 pagesEnglish languagesale 15% off
IEC 62899-403-1:2018(E) specifies commonly-utilized basic design patterns to evaluate printing machines with pattern reproducibility from the view point of printability in the field of printed electronics. These basic patterns consist of several evaluation patterns and register marks. Printability is derived from the evaluation of the reproducibility of these printed patterns produced by the printed machine.
- Standard24 pagesEnglish languagesale 15% off
This document defines vocabulary and specifies test methods, characteristics, ordering and labelling
information for blankets for offset printing. This document does not apply to un-tensioned or unclamped
blankets for offset printing, nor offset printing sleeves used on gapless presses.
- Standard11 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62899-302-2:2018(E) specifies the method for determining accurate inkjet droplet volume based on images obtained by drop-in-flight measurement systems. It does not apply to imaging systems using interference fringes, such as holography or phase doppler anemometry. This document is not limited to drop-on-demand inkjet systems, but might not be applicable to continuous inkjet or liquid dispensing systems. This document includes a description of the issues concerning such measurements and consideration of the limits to measurement accuracy.
- Standard17 pagesEnglish languagesale 15% off
IEC 62899-303-1:2018(E) defines standard mechanical dimensions (especially related to the web size) of equipment for printed electronics. This document covers web-based printing equipment, but it can be used for sheet-based products.
- Standard9 pagesEnglish languagesale 15% off
ISO 20690:2018 provides requirements and recommendations for measuring the electricity consumption of small-format and wide-format digital production presses printing in different modes of operation. It is intended for use on equipment that has been declared by the manufacturer to be suitable for use as a digital production printing press. ISO 20690:2018 provides a means to compare the energy efficiency figures according to two or more characteristic machine combinations: Best Quality (BQ), Best Productivity (BP) or other combinations. ISO 20690:2018 is not suitable for determining the power consumption of individual device components such as servos, fans, compressors, control boards and so on. It excludes digital presses designed to print textiles intended for clothing or machines, which similarly depend on additional processes to produce the printed product, such as ceramics.
- Standard23 pagesEnglish languagesale 15% off
ISO 12636:2017 defines vocabulary and specifies test methods, characteristics, ordering and labelling information for blankets for offset printing. This document does not apply to un-tensioned or unclamped blankets for offset printing, nor offset printing sleeves used on gapless presses.
- Standard11 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62899-301-2:2017(E) defines measurement terms and methods related to the critical dimension of features and the registration accuracy of features on rigid plate masters.
General critical dimensions are defined to evaluate the shape accuracy of features on the plate master. To evaluate the registration accuracy of features on the plate master, the specification for the registration mark for the plate master is specified. Then, common metrology procedures to measure the critical dimensions and the registration accuracy of the plate master are established for device manufacturers, printing master manufacturers and printing master manufacturing equipment vendors. The measurement terms which are measured by agreement between the user and the supplier are measured using the measurement methods given in this document.
- Standard26 pagesEnglish languagesale 15% off
IEC 62899-302-1:2017(E) specifies the method for determining inkjet drop speed based on visualized droplet images obtained by a drop analysis system. This measurement standardization is limited to drop-on-demand-type of inkjet and is not applicable to continuous inkjet. This document includes the test process, image processing software algorithm, and analysis of jetting behavior.
- Standard18 pagesEnglish languagesale 15% off
IEC 62899-301-1:2017(E) defines measurement terms and methods related to the external dimension of a rigid plate master. Measurement terms include geometrical size such as edge length, edge squareness, edge straightness and thickness, flatness of plate master substrates, and surface roughness of plate master.
- Standard21 pagesEnglish languagesale 15% off
ISO/IEC 24790:2017 specifies device-independent image quality attributes, measurement methods and analytical procedures to describe the quality of output images from hardcopy devices. This document is applicable to human-readable monochrome documents produced from printers and copiers. The attributes, methods and procedures rely on measurable properties of printed text and graphic images. Special targets or reference images are not required, but image elements are useful for adequate measurements only if they meet some minimal requirements, e.g. on size or number present. This document is not applicable to images on media other than hardcopy (e.g. images on a visual display) or to images that are intended to be machine readable only (e.g. bar codes).
- Standard65 pagesEnglish languagesale 15% off
ISO 19594:2017 specifies a test method for the determination of the binding strength of perfect-bound products by pulling out single sheets from the book block in an upward direction.
- Standard14 pagesEnglish languagesale 15% off
ISO/IEC 19752:2017 is limited to the evaluation of toner cartridge page yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotographic print systems. This document could also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components). ISO/IEC 19752:2017 is only intended for the measurement of toner cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc. NOTE 1 Application of this document for yield measurement of toner replenishment systems (i.e. toner cartridge- and bottle-type systems where the toner reservoir is internal to the printing system and not user-replaceable) requires some procedural modifications specifically noted herein. This document is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this document. NOTE 2 An all-in-one cartridge is a cartridge that includes at least a toner containment part, a photoreceptor part and a developer part (see ISO/IEC 29142-1).
- Standard26 pagesEnglish languagesale 15% off
The scope of ISO/IEC 19798:2017 is limited to evaluation of toner cartridge page yield for toner-containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for colour electrophotographic print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain electrophotographic printer components. ISO/IEC 19798:2017 is only intended for the measurement of toner cartridge page yield when printing on plain paper using cyan, magenta, yellow and black toner cartridges. No other claims can be made from this testing regarding quality, reliability, etc. ISO/IEC 19798:2017 is not for use with printers whose minimum printable size is equal to or greater than A3 or for photo-only printers. NOTE 1 Application of this document for yield measurement of toner replenishment systems (i.e. toner cartridge and bottle type systems where the toner reservoir is internal to the printing system and not user-replaceable) requires some procedural modifications specifically noted herein. This document is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this document. NOTE 2 An all-in-one toner cartridge is a cartridge that includes at least: a toner containment part, a photoreceptor part and a developer part (see ISO/IEC 29142‑1).
- Standard19 pagesEnglish languagesale 15% off
This International Standard specifies requirements for two conformance levels for the characteristics
of displays to be used for soft proofing of colour images. Included are requirements for uniformity and
variations of electro-optical properties with viewing direction for different driving signals.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard12 pagesEnglish languagesale 15% off
ISO/IEC 17823:2015 provides definitions for colour terms used with office equipment, in particular for use with colour scanning and printing devices that have digital imaging capabilities, including multi-function devices. ISO/IEC 17823:2015 is not intended to replace terms and definitions published in documents or user interfaces issued or created by manufacturers.
- Standard15 pagesEnglish languagesale 15% off
ISO/IEC 29102:2015 is to provide a method to determine the ink cartridge photo yield of ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated printheads) for colour photo printing with colour inkjet printers and multifunction devices that contain inkjet printer components. In the case where a cartridge set can be used in multiple printer models, only one yield test needs to be performed as long as the difference between printer models does not impact yield. NOTE A cartridge supplier may choose to use more than one market identifier for a single physical cartridge. In this case only one yield test is required as long as there are no differences in the cartridges other than market identifiers. ISO/IEC 29102:2015 prescribes the following: - the test method that manufacturers, test laboratories, etc. use to determine ink cartridge photo yield; - the method for determination of declared photo yield values from the test results; and - the appropriate method of describing the photo yield of cartridges in documentation supplied to the consumer by the manufacturer. ISO/IEC 29102:2015 is only intended for the determination of ink cartridge photo yield. No other claims can be made from this testing regarding quality, reliability, etc. ISO/IEC 29102:2015 can be used to determine the yield of any cartridge that is used during the printing of the photo test file defined in ISO/IEC 29103. ISO/IEC 29102:2015 is not for use with printers whose minimum printable size is equal to or greater than A3. This International Standard is not intended to measure the yield of photo printing on paper size larger than 4×6, L or A6. In addition, this International Standard is not for use with industrial printers or point of sale printers. It only applies to desktop printing systems.
- Standard26 pagesEnglish languagesale 15% off
ISO 15341:2014 defines a method for measuring the external radius of printing cylinders, specifies critical parameters and operational instructions and provides recommendations for instrument design.
- Standard17 pagesEnglish languagesale 15% off
ISO/IEC 17629:2014 specifies a method for measuring first print out time of digital printing devices. It is applicable to digital printing devices and multifunctional devices. It is intended to be used for black and white (B&W) as well as colour digital printing devices and multifunctional devices of any underlying marking technology. It includes instructions for test charts, test setup procedure, test procedure, and the reporting requirements for the digital printing measurements.
- Standard30 pagesEnglish languagesale 15% off
This part of ISO 12643 provides safety requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process. It is applicable to a wide range of equipment used in the binding and finishing process.
- Standard61 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard56 pagesEnglish languagesale 15% off
This part of ISO 12643 provides safety requirements specific to prepress and press equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard49 pagesEnglish languagesale 15% off
ISO/IEC 29142-2:2013 establishes the product and package labelling, and related reporting provisions for toner and ink cartridges used in printing devices that have a digital input printing path, including multi-function devices. It is intended for equipment used in office environments. ISO/IEC 29142-2:2013 defines the information requirements for the cartridge characterization documentation on packaging and cartridges, and in reports.
- Standard15 pagesEnglish languagesale 15% off
ISO/IEC 29142-3:2013 describes the principles and framework for environmental assessment of ink and toner cartridges used in printing devices that have a digital input printing path, including multi-function devices, including: a) the goals and definitions related to environmental responsibility; b) guidance to determine the relative benefits of reuse, recycling, recovery, and reduction techniques; c) identification and prioritization of environmental attributes according to each phase of the cartridge life-cycle; d) criteria for establishing environmentally sustainable practices. ISO/IEC 29142-3:2013 establishes foundational terms, definitions, attributes, and test methods for cartridge environmental standards, environmental labels, and green procurement criteria. ISO/IEC 29142-3:2013 standardizes treatment of environmental interactions and impacts throughout the cartridge life-cycle, and promotes harmonization of environmental standards, environmental labels, and green procurement criteria pertaining to ink and toner cartridges, thereby reducing impact on the environment and informing and benefiting the cartridge customer. ISO/IEC 29142-3:2013 establishes environmental terms, definitions, attributes and test methods in accordance with the terms, symbols, notations and framework of ISO/IEC 29142-1 and ISO Guide 64.
- Standard11 pagesEnglish languagesale 15% off
ISO/IEC TR 29186:2012 is a supplement to CIE 156:2004, applicable for use in evaluating the colour gamut mapping algorithms of office colour softcopy and hardcopy equipment. ISO/IEC TR 29186:2012 defines test charts, test chart image processing workflow, media, viewing conditions, measurements, colour spaces and experimental methods, suitable for use with office equipment, which either do not exist in CIE 156:2004 or are different from CIE 156:2004. Colour softcopy may be displayed on monitors, incorporating display technologies such as CRT and LCD. Colour hardcopy may be produced by non-impact colour printers, including technologies such as ink jet and electro photography.
- Technical report12 pagesEnglish languagesale 15% off
- Technical report12 pagesEnglish languagesale 15% off
ISO/IEC 21117:2012 specifies the information to be listed in specification sheets for electrophotographic digital copying machines and multi-function devices.
- Standard31 pagesEnglish languagesale 15% off