43.160 - Special purpose vehicles

This European Standard specifies requirements for the design, testing, performance and equipping of road ambulances used for the transport, monitoring, treatment and care of patients. It contains requirements for the patient’s compartment in terms of the working environment, ergonomic design and the safety of the crew and patients.This European Standard does not cover the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be re...view more

This European Standard determines the demands on design and construction of bulk spreaders, trailer spreaders and towed spreaders with speed related spreading for winter service. At the same time, information is given on the minimum content required for operating manuals.
The standard is valid for machines which are used to spread the following media:
a)   spreading not pre-wetted and pre-wetted thawing media;
b)   abrasive spreading agents;
c)   brine.
The following points are not covered by thi...view more

This European Standard gives the possibility to certify a model of vehicle-mounted or (trailer) dragged spreading machines for winter service with standard parameters, leaving the possibility to the manufacturer to evolve in performances. At the same time, information is given on the minimum content required for operating manuals.
This standard is valid for machines which are used to spread the following media:
-   not pre-wetted thawing media (solid thawing media);
-   pre-wetted thawing media;
...view more

This document specifies safety requirements applicable to combustion engine powered pedestrian-controlled snow throwers. It is intended to be used with ISO 8437-1 and ISO 8437-4 to achieve the full requirements and means of verification for pedestrian-controlled snow throwers. The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably foreseeable by the manufacturer. It does not apply to the f...view more

This document provides additional national and regional requirements applicable to combustion engine powered pedestrian-controlled and ride-on snow throwers. It is intended to be used with ISO 8437-1, ISO 8437-2 and ISO 8437-3 to achieve the full requirements and means for pedestrian-controlled and ride-on snow throwers. The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably foreseeable by...view more

This document defines terms and definitions and common test methods applicable to combustion engine powered pedestrian-controlled and ride-on snow throwers. It is intended to be used with ISO 8437-2, ISO 8437-3 and ISO 8437-4 to achieve the full requirements and means of verification for pedestrian-controlled and ride-on snow throwers. The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably...view more

This document specifies safety requirements applicable to combustion engine powered ride-on snow throwers. It is intended to be used with ISO 8437-1 and ISO 8437-4 to achieve the full requirements and means for ride-on snow throwers. The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably foreseeable by the manufacturer. It does not apply to the following: — electrically powered and battery...view more

This European Standard provides a set of CANopen application profile specifications that describes the CleANopen embedded body control network of municipal vehicles, e.g. refuse collecting trucks. It specifies the CANopen communication interfaces and the application functionality of several functional elements (virtual devices).
It does not specify CANopen devices. The CleANopen application profile specifications consist of several parts dealing with the following:
- general definitions;
- fu...view more

This European Standard provides a set of CANopen application profile specifications that describes the CleANopen embedded body control network of municipal vehicles, e.g. refuse collecting trucks. It specifies the CANopen communication interfaces and the application functionality of several functional elements (virtual devices).
It does not specify CANopen devices. The CleANopen application profile specifications consist of several parts dealing with the following:
- general definitions;
- fu...view more

This European Standard specifies a standardized protocol for downloading data from the equipment control
box to an in-vehicle board computer to ensure interchangeability between a vehicle and different equipment
that the same vehicle can carry.
It specifies the interface connection as well as variables, records and reports which permit standardized
protocol to cover applications with the greatest possible variety of equipment for performing winter
maintenance and road service area maintenan...view more

Same as in EN 15430-1:2007 + A1:2011

This European Standard defines minimum requirements for the design and performance of stretchers and other patient handling equipment used in road ambulances for the handling and carrying of patients. It aims to ensure patient safety and minimize the physical effort required by staff operating the equipment.

This document defines the classification criteria of the road service area maintenance equipment described in the scope of EN 15436 1 and used for:
-   grass cutting and brush cutting;
-   mechanical plant cutting.
This equipment is mounted on self-propelled carrying vehicles, and is intended, on the one hand, for cutting and shredding grass and brushwood, and, on the other hand, for trimming trees, saplings and bushes in road service areas. This document is intended to be used also in conjunctio...view more

This European Standard specifies the accuracy of the performance measurement system of road service area maintenance equipment described in the scope of CEN/TC 337 and used for:
-   grass-cutting and brush-cutting;
-   mechanical plant-cutting.
This equipment is mounted on self-propelled carrying vehicles and is designed to cut and shred grass, brushwood, trees, saplings and bushes in road service areas.
This European Standard does not cover the collection and transportation of shredded grass.

This document defines the classification criteria of the road service area maintenance equipment described in the scope of EN 15436 1 and used for:
-   grass cutting and brush cutting;
-   mechanical plant cutting.
This equipment is mounted on self-propelled carrying vehicles, and is intended, on the one hand, for cutting and shredding grass and brushwood, and, on the other hand, for trimming trees, saplings and bushes in road service areas. This document is intended to be used also in conjunctio...view more

This European Standard specifies the accuracy of the performance measurement system of road service area maintenance equipment described in the scope of CEN/TC 337 and used for:
-   grass-cutting and brush-cutting;
-   mechanical plant-cutting.
This equipment is mounted on self-propelled carrying vehicles and is designed to cut and shred grass, brushwood, trees, saplings and bushes in road service areas.
This European Standard does not cover the collection and transportation of shredded grass.

This Technical Specification is applicable to graphical symbols for control elements and displays and for markings for fire fighting and rescue service vehicles and equipment.

This European Standard applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This European Standard is applicable to the design and construction of the rear loaded RCV so as to e...view more

This test establishes a method to assess the PM10 and PM2.5 efficiency of road sweepers. PM10 and PM2.5 efficiency includes a sweeper’s ability to:
   Remove and capture PM10 and PM2.5 particulate matter, and coarse size fractions, from typical urban road surfaces;
   Minimize the amount of airborne and entrained PM10 and PM2.5 particulate matter resulting from the sweeping process.
The sweeper’s ability to remove and capture particulate matter and coarse size fractions is assessed using proced...view more

This document deals with graphical symbols uniquely used to indicate the function and status of operator controls and tell-tale displays of the specialized equipment.
Common symbols that are included in other standards and applied to a wider range of machines are not included. Typically, symbols in this category that may equally be applied to surface cleaning machines can be found in ISO 2575 and ISO 6405.
This document does not apply to machines or components that are specifically designed fo...view more