This document contains technical safety requirements for the design, equipment and testing of brushless vehicle washing systems and vehicle washing systems with brushes for, indoor and outdoor operation, i.e. roll-over vehicle washing systems, vehicle washing tunnels, manually movable vehicle washing facilities.
This document does not apply to hand-guided high pressure cleaners which are covered by
EN 60335 2-79:2012, to water recycling systems, buildings and doors for entering the traffic zone, for powered ride-on machines and powered walk-behind machines with a traction drive.
NOTE   Signals (example doors, lighting systems) can be provided by the vehicle washing system.
This document contains requirements for the protection of persons and objects from accidents and damages during use and operation of vehicle washing systems.
Persons to be protected are:
-   operators,
-   maintenance and monitoring personnel,
-   persons in the vicinity of vehicle washing systems,
-   persons sitting in the vehicle during cleaning.
Objects to be protected are:
-   vehicles.
Significant hazards associated with vehicle washing systems are listed in Clause 4. These hazards have been established by a risk assessment according to EN ISO 12100 and require measures to eliminate the hazard or to reduce the risk. These measures are specified in Clause 5 of this document.
The safety requirements assume that vehicle washing systems are regularly maintained by trained and competent persons according to the manufacturer's information and that the operators, with the exception of users of self-service washing systems, have been instructed in the handling of vehicle washing systems.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the design, construction and operation of platform barrier systems positioned at the edge of a station platform immediately adjacent to rail or other guided vehicles in stations and boarding points for passenger services and includes:
- requirements for the fixed structure and fixed parts along the platform;
- physical requirements for the movable doors and gates normally used by passengers;
- requirements for emergency doors;
- requirements for driver access doors;
- requirements for platform extremity doors;
- requirements for management of safety risks that are particular to barrier systems.
This European Standard also gives requirements for the integration of barriers with the overall rail system including:
- synchronization of vehicle and platform barrier doors or gates;
- audible and visible alerts;
- integrity of control systems;
- testing of the barrier installation;
- operational performance;
- requirements relating to other interfacing sub-systems, notably signalling and vehicles.
For barrier systems set back from the platform edge, which are used to control access to trains or for crowd management, relevant sections of the document can be used as guidance.
This European Standard applies to all actors involved in the implementation and system integration of a platform barrier system, including infrastructure owners, designers, installers and operators.
This European Standard does not cover barrier systems using bars, ropes, etc. or which operate in a vertical direction.  
This European Standard applies to light rail services, e.g. metro and tramway systems and heavy rail services as requested by a project specification. It applies to small systems, working in conjunction with a single vehicle, or with larger systems working with a complete train.
This European Standard applies to platform barrier systems used at sub-surface stations, enclosed surface stations (e.g. those enclosed for the purposes of providing an air-conditioned environment for waiting passengers), and those fully in the open-air.
This European Standard does not cover normative requirements relating to fire performance or fire requirements arising from use of platform barrier systems as fire barriers.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the requirements when applying material to the active interface between the wheel tread and the crown of the rail and includes trainborne and track side equipment.
This technical specification only covers the equipment and application of material to the active interface.
This document defines:
- the characteristics that systems of top of rail equipment for wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verification;
- all relevant terminology which is specific to the application of top of rail materials of the wheel-rail interface.
This document only applies to the mainline railway
NOTE   This document can also be used for other railways, e. g urban rail’

  • Technical specification
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification specifies the requirements of materials intended to be applied to the interface between the wheel tread and the rail crown (active interface). It can be applied either directly or indirectly to the wheel tread or rail.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the material.
This Technical Specification does not deal with adhesion materials, for example:
- sand
- adhesion enhancers

  • Technical specification
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements of materials intended to be applied to the interface between the wheel tread and the rail crown (active interface). It can be applied either directly or indirectly to the wheel tread or rail.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the material.
This document does not deal with adhesion materials, for example:
-   sand;
-   adhesion enhancers.

  • Technical specification
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is limited to specifying the requirements when applying material to the active interface between the wheel tread and the crown of the rail and includes trainborne and track side equipment.
This document only covers the equipment and application of material to the active interface.
This document defines:
-   the characteristics that systems of top of rail equipment for wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verification;
-   all relevant terminology which is specific to the application of top of rail materials of the wheel-rail interface.
This document only applies to the mainline railway.
NOTE   This document can also be used for other railways, e.g. urban rail.

  • Technical specification
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This technical report covers machines fitted with rail wheels that are used for the construction, maintenance, inspection, repair and renewal of railway infrastructure. It is also applicable to machines used for emergency rescue purposes on railway infrastructure.
NOTE inspection of the infrastructure includes measurement
This technical report explains the different modes of operation, types of machine and which standard covers the technical requirements, and guidance on the acceptance process.

  • Technical report
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document covers machines fitted with rail wheels that are used for the construction, maintenance, inspection, repair and renewal of railway infrastructure. It is also applicable to machines used for emergency rescue purposes on railway infrastructure.
NOTE    Inspection of the infrastructure includes measurement
This document explains the different modes of operation, classification of machines and which standard covers the technical requirements. There is also guidance on the compliance process provided to explain the design review process of different legislation, how these can be combined into one process (to avoid duplication) and achieve a common understanding of what the design review is achieving.

  • Technical report
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This document deals with the technical requirements to minimize the specific railway hazards of railbound construction and maintenance machines - henceforward referred to as machines, intended for use on urban rail systems. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative.
The requirements in this standard amend those in EN 14033-1 to −3 as required for the use of the machine on urban rail systems. Where a machine is designed and intended for use on mainline and urban rail systems, compliance with the most onerous conditions of EN 14033-1 to −3 and EN 14033-4 will be required.
This document does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   machines moving and working whilst not on rails;
-   specific requirements established by the machine owner and/or operating company for the use of machines, which will be the subject of negotiation between the manufacturer and the Urban Rail Manager.
This document does not establish additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. in tunnels or cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields;
-   hazards that may occur when a machine is used to handle suspended loads which may swing freely.
Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B.
1.2   Scope of urban rail systems
Urban rail systems cover Urban Guided Transport systems (UGT) and might include other rail systems excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b))1.
Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
Categories of urban rail systems include:
-   (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network.
-   (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations).
-   (III) Light Rail: Light Rail is defined as a UGT system operated in parts of the system not segregated from general road and pedestrian traffic, and in parts of the system with segregated right-of-way. The segregation may include some sections of line where inadvertent access is not possible.
-   (IV) Local rail systems which by national decision complying with Article 1 (3) a) or b) of Directive 2008/57/EC may be excluded from the European Community Rail System.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard deals with the technical requirements to minimize the specific railway hazards of railbound construction and maintenance machines - henceforward referred to as machines, intended for use on urban rail. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative.
The requirements in this standard amend those in EN 14033-1 to -3 as required for the use of the machine on urban railways. Where a machine is designed and intended for use on mainline and urban rail, compliance with the most onerous conditions of EN 14033-1 and EN 14033-4 will be required.
This European Standard does not apply to the following:
-   the requirements for quality of the work or performance of the machine;
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the Urban Rail Manager;
-   moving and working whilst not on rails.
This European Standard does not establish the additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. in tunnels or cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.
Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B.
1.2   Scope of urban rail
Urban rail systems cover Urban Guided Transport systems (UGT) and might include other rail systems excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b))1.
Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
Categories of urban rail systems include:
-   (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network.
-   (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations).
-   (III) Light Rail: Light Rail is defined as a UGT system operated in parts of the system not segregated from general road and pedestrian traffic, and in parts of the system with segregated right-of-way. The segregation may include some sections of line where inadvertent access is not possible.
-   (IV) Local rail systems which by national decision complying with Article 1 (3) a) or b) of Directive 2008/57/EC may be excluded from the European Community Rail System.
NOTE   Such systems connect city centres with their suburban hinterland or regional local centres. (....)

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard provides the specific requirements for non-destructive testing (NDT) of wheelsets for:
— in-service inspection,
— off-vehicle inspection,
— NDT Personnel Certification (incl. training, qualification, renewal),
— NDT Procedure and Instruction,
— introduction of new NDT Techniques,
For this standard, the following NDT methods considered are:
— ultrasound testing (UT),
— magnetic particle testing (MT),
— eddy current testing (ET),
For application of these methods, a catalogue of common defects is given as guidance.
Other methods considered in ISO 9712 are outside the scope of this standard.
For application of this standard the definition of the “Wheelset Class” is given and attached to the Railway Maintenance Sector as named in ISO 9712.
Specific NDT requirements for infrastructure or requirements relating to the quality of new products delivered by manufacturers are not within the scope of this standard.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard defines the specific technical railway requirements for travelling and working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.
This European Standard applies to all railbound machines and other vehicles- referred to as machines - working exclusively on the railway (utilizing adhesion between the rail and rail wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.
This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex M.
This European Standard is applicable to 1 435 mm nominal track gauge. Some requirements may be applicable for working on infrastructures with nominal narrow track gauge or nominal broad track gauge lines, tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard covers the safety requirements for the railway specific problems for travelling and working on different infrastructures. The application of these requirements is the object of a verification procedure, which does not form part of this European Standard, but an Annex I is included for information. In all cases an authorization to work is needed to access the infrastructure.
This European Standard is also applicable for machines that in working position are partly supported on the ballast or the formation.
This European Standard does not apply to:
-   the requirements with regard to the quality of work, including the related measuring methods, and the performance of the machine; )
-   the specific requirements established by each railway infrastructure manager for the use of machines which will be the subject of negotiation between the manufacturer and the machine keeper.
This European Standard does not deal with the following additional requirements:
-   working methods;
-   operation in severe working conditions requiring special measures (e.g. work in tunnels or in cuttings, extreme environmental conditions such as high or low temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   hazards due to errors in software;
-   hazards occurring when used to handle suspended loads which may swing freely;
-   hazards due to wind pressure greater than normal e.g. pressures caused by the passing of trains at speed in excess of 190 km/h.
1.2   Validity of this European Standard
This European Standard applies to all machines that are ordered one year after the publication date of this European Standard.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment. Special national conditions applicable to specific member states are shown in Annex B.
This European Standard applies to all railbound machines and other vehicles - referred to as machines - running exclusively on the railway (utilizing adhesion between the rail and wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.
This European Standard applies to machines that are intended to operate signalling and control systems. Other machines are dealt with in other European Standards, see Annex I.
This European Standard is written for 1 435 mm nominal track gauge; special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, urban railways, railways utilizing other than adhesion between the rail and wheels and road-rail machines which are not included in this standard.
This European Standard covers the railway specific requirements for movements of the machine as a train and movements to reach work sites.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1 General
This European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.
This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D.
This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures (less than - 20 °C or greater than + 40 °C), highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Air pressure caused by the passing of high-speed trains at more than 190 km/h is also not dealt with.
NOTE 1 Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manufacturer and/or machine operator as referred to in the scope are not dealt with in this European Standard. When such additional measures are necessary, they should be agreed between the manufacturer and the machine operator. The manufacturer will be responsible for compliance with the Directive(s) concerned independent of this European Standard for additional hazards created by any additional or alternative requirements.
NOTE 2 This European Standard deals only with the additional hazards from the adaptation of a machine for its use on rail. Other standards specific to the particular machine as far as available will need to be used in addition to this European Standard to give the complete requirements.
The common hazards specified include the general hazards presented by the machines, and also the hazards presented by the following specific machine functions, common to two or more machine types:
- ballast excavation, ballast cleaning, ballast regulating, ballast consolidating;
- tamping;
- track renewal;
- craning;
- maintenance of the components of the infrastructure;
during commissioning, use, maintenance and servicing.
This European Standard does not deal comprehensively with specific machine functions other than the common functions listed in the previous paragraph, or with all possible hazards presented by complete machines or by the combination of functions.
NOTE 3 For such specific functions or hazards, the use of specific European Standards is recommended.
This European Standard does not deal with:
- requirements with regard to the quality of work and the performance of the machine;
- machines that utilise the catenary for traction purposes;
- specific requirements introduced by a railway infrastructure manager;
- additional or alternative requirements introduced by the manufacturer and/or operator.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard defines the specific technical railway requirements for working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.
This European Standard applies to all railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising adhesion between the rail and rail wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.
This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex M.
Additional requirements can apply for working on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is applicable to 1 435 mm nominal track gauge. Some requirements may be applicable for working on infrastructures with nominal narrow track gauge or nominal broad track gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard covers the safety requirements for the railway specific problems for working on different infrastructures. The application of these requirements is the object of a verification procedure, which does not form part of this European Standard, but an Annex J is included for information. In all cases an authorisation to work is required to access the infrastructure.
   This European Standard is also applicable for machines that in working position are partly supported on the ballast or the formation.
   This European Standard does not apply to
-   the requirements with regard to the quality of work, including the related measuring methods, and the performance of the machine; )
-   the specific requirements established by each railway infrastructure manager for the use of machines which will be the subject of negotiation between the manufacturer and the infrastructure manager.
   This European Standard does not deal with the following additional requirements:
-   working methods;
-   operation in severe working conditions requiring special measures (e.g. work in tunnels or in cuttings, extreme environmental conditions such as freezer applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   hazards due to errors in software;
-   hazards occurring when used to handle suspended loads which may swing freely;
-   hazards due to wind pressure greater than normal e.g. pressures caused by the passing of trains at speed in excess of 190 km/h.
1.2   Validity of this European Standard
This European Standard applies to all machines, which are ordered after one year from the publication date of this European Standard.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment.
This European Standard applies to all railbound machines and other vehicles – referred to as machines – running exclusively on the railway (utilising adhesion between the rail and wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other machines are dealt with in other European Standards, see Annex K.
Special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and wheels, road-rail machines and underground infrastructures.
This European Standard covers the requirements for safety and access of railway traffic, railway specific requirements for running on different infrastructures in relation to necessary movements of the machine as a train and movements to reach work sites.
1.2   Validity of the European Standard
This European Standard applies to new designs taking into consideration the recommendations given in Annex L on the application of the standard (migration rule).

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.
This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D.
This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures (less than - 20 °C or greater than + 40 °C), highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Air pressure caused by the passing of high-speed trains at more than 190 km/h is also not dealt with.
NOTE 1   Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manufacturer and/or machine operator as referred to in the scope are not dealt with in this European Standard. When such additional measures are necessary, they should be agreed between the manufacturer and the machine operator. The manufacturer will be responsible for compliance with the Directive(s) concerned independent of this European Standard for additional hazards created by any additional or alternative requirements.
NOTE 2   This European Standard deals only with the additional hazards from the adaptation of a machine for its use on rail. Other standards specific to the particular machine as far as available will need to be used in addition to this European Standard to give the complete requirements.
The common hazards specified include the general hazards presented by the machines, and also the hazards presented by the following specific machine functions, common to two or more machine types:
-   ballast excavation, ballast cleaning, ballast regulating, ballast consolidating;
-   tamping;
-   track renewal;
-   craning;
-   maintenance of the components of the infrastructure;
during commissioning, use, maintenance and servicing.
This European Standard does not deal comprehensively with specific machine functions other than the common functions listed in the previous paragraph, or with all possible hazards presented by complete machines or by the combination of functions.
NOTE 3   For such specific functions or hazards, the use of specific European Standards is recommended.
This European Standard does not deal with:
-   requirements with regard to the quality of work and the performance of the machine;
-   machines that utilise the catenary for traction purposes;
-   specific requirements introduced by a railway infrastructure manager;
-   additional or alternative requirements introduced by the manufacturer and/or operator.
1.2   Validity of this European Standard
This European Standard applies to all machines, which are ordered after one year from the publication date

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to demountable machines, as defined in EN 15955-1:2013, intended for construction, maintenance inspection of the railway infrastructure, shunting and emergency rescue vehicles. This European Standard specifies the technical requirements to deal with the common hazards during transport, assembly and installation, commissioning, running on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer; see Clause 4. NOTE Specific measures for exceptional circumstances are not dealt with in this European Standard. They can be the subject of negotiation between manufacturer and the machine operator. The common hazards dealt with include the general hazards presented by the machines, as well as the hazards presented by the following specific machine functions:
- excavation;
- ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;
- track renewal;
- rail maintenance;
- craning;
- catenary renewal / maintenance;
- maintenance of the components of the infrastructure;
- inspection and measurement of the components of the infrastructure;
- tunnel inspection / ventilation;
- shunting;
- emergency rescue and recovery;
during commissioning, use, maintenance and servicing.
This European Standard applies to self-propelled machines that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards; see Annex D. It is assumed that a finished standard automotive chassis used as a host for a demountable machine will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard. This European Standard does not deal with:
a) requirements with regard to the quality of work and the performance of the machine;
b) machines that utilise the catenary for traction purposes;
c) specific requirements established by a railway infrastructure manager; d) negotiations between the manufacturer and the machine operator for additional or alternative requirements;
e) hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h;
f) requirements which could be necessary in case of use in extreme conditions, such as:
1) extreme ambient temperatures (below − 20 °C or above + 40 °C);
2) highly corrosive or contaminating environment, e.g. due to the presence of chemicals;
3) potentially explosive atmospheres.
This European Standard applies to all machines that are ordered one year after the publication date by CEN of this standard.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to trailers, as defined in the scope of EN 15954-1, including machinery, attachments and equipment permanently fixed to the trailer, intended for construction, maintenance and/or inspection of the railway infrastructure, emergency rescue and recovery.
This European Standard specifies the technical requirements to deal with the common hazards during transport, assembly and installation, commissioning, running on track, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the trailers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer; see Clause 4.
NOTE   Specific measures for exceptional circumstances are not dealt with in this European Standard. They can be the subject of negotiation between manufacturer and the machine operator.
The common hazards dealt with include the general hazards presented by the trailers, as well as the hazards presented by the following specific trailer functions:
-   track renewal;
-   rail maintenance;
-   craning;
-   catenary renewal / maintenance;
-   maintenance of the components of the infrastructure;
-   inspection and measurement of the components of the infrastructure;
-   tunnel inspection / ventilation;
-   emergency rescue and recovery
during commissioning, use, maintenance and servicing.
This European Standard applies to trailers that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards; see Annex D.
It is assumed that a finished standard automotive chassis used as a host for a road-rail trailer will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard.
This European Standard does not deal with:
a)   requirements with regard to the quality of work and the performance of trailers;
b)   specific requirements established by a railway infrastructure manager;
c)   negotiations between the manufacturer and the trailer operator for additional or alternative requirements;
d)   requirements for use and running of the trailer on public highway;
e)   hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h;
f)   requirements which could be necessary in case of use in extreme conditions, such as:
1)   extreme ambient temperatures (below – 20°C or above + 40°C);
2)   highly corrosive or contaminating environment, e.g. due to the presence of chemicals;
3)   potentially explosive atmospheres.
This European Standard applies to all trailers that are ordered one year after the publication date by CEN of this standard.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard specifies the technical requirements to minimise the specific railway hazards of self propelled demountable machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of these machines when carried out in accordance with the specification given by the manufacturer or his authorised representative. These machines are not designed or intended to operate signalling and control systems and are only designed and intended to work and run under special operating conditions specifically designated by the infrastructure manager. Other machines are dealt with in other European Standards; see Annex D.
This part of EN 15955 deals with the technical railway requirements; Part 2 deals with the requirements for the machine to be declared conformant by the manufacturer, except in the case of machines classified in Annex 4 of the Machinery Directive (2006/42/EC) which requires conformity check in conjunction with a notified body.
These demountable machines are not intended to be vehicles as defined in the Interoperability Directive and are not permitted to run on the railway lines open to normal traffic. If this is required, they will need to be authorised or placed into service as set out in the Interoperability Directive 2008/57/EC.
Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is also applicable to machines and associated equipment that in working configuration are partly supported on the ballast or the formation.
This European Standard does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   specific requirements established by the railway infrastructure operator for the use of machines, which will be the subject of negotiation between the manufacturer and the purchaser;
-   separate machines temporarily mounted on demountable machines and associated equipment.
This European Standard does not establish the additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. work in tunnels or in cuttings, extreme environmental conditions (below – 20 °C or above + 40 °C), corrosive environment, contaminating environments, strong magnetic fields;
-   hazards due to errors in software;
-   hazards occurring when used to handle suspended loads which may swing freely.
The intended use of these machines may have operational parameters specified by each infrastructure manager, e.g. the maximum speed allowed for these machines is likely to be limited by the infrastructure manager; compliance with the clauses of this standard does not confer permission for machines to travel at this speed. These machines will not be allowed on a track open to normal railway traffic.
1.2   Validity of this European Standard
This European Standard applies to all machines, which are ordered one year after the publication date by CEN of this standard.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to demountable machines, as defined in EN 15955-1:2013, intended for construction, maintenance inspection of the railway infrastructure, shunting and emergency rescue vehicles.
This European Standard specifies the technical requirements to deal with the common hazards during transport, assembly and installation, commissioning, running on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer; see Clause 4.
NOTE   Specific measures for exceptional circumstances are not dealt with in this European Standard. They can be the subject of negotiation between manufacturer and the machine operator.
The common hazards dealt with include the general hazards presented by the machines, as well as the hazards presented by the following specific machine functions:
-   excavation;
-   ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;
-   track renewal;
-   rail maintenance;
-   craning;
-   catenary renewal / maintenance;
-   maintenance of the components of the infrastructure;
-   inspection and measurement of the components of the infrastructure;
-   tunnel inspection / ventilation;
-   shunting;
-   emergency rescue and recovery;
during commissioning, use, maintenance and servicing.
This European Standard applies to self-propelled machines that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards; see Annex D.
It is assumed that a finished standard automotive chassis used as a host for a demountable machine will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard.
This European Standard does not deal with:
a)   requirements with regard to the quality of work and the performance of the machine;
b)   machines that utilise the catenary for traction purposes;
c)   specific requirements established by a railway infrastructure manager;
d)   negotiations between the manufacturer and the machine operator for additional or alternative requirements;
e)   hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h;
f)   requirements which could be necessary in case of use in extreme conditions, such as:
1)   extreme ambient temperatures (below − 20 °C or above + 40 °C);
2)   highly corrosive or contaminating environment, e.g. due to the presence of chemicals;
3)   potentially explosive atmospheres.
This European Standard applies to all machines that are ordered one year after the publication date by CEN of this standard.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard specifies the technical requirements to minimise the specific railway hazards of trailers and associated equipment, which can arise during the commissioning, the operation and the maintenance of trailers when carried out in accordance with the specification given by the manufacturer or his authorised representative. This European Standard applies to trailers that are not intended to interact with operating signalling and control systems. Other machines are dealt with in other European Standards; see Annex E.
These trailers are not designed or intended for operating signalling and control systems and are only intended to work and run under special operating conditions specifically designated by the infrastructure manager.
These trailers are not intended to be vehicles as defined in the Interoperability Directive and are not permitted to run on the railway lines open to normal traffic. If this is required, they will need to be authorised or placed into service as set out in the Interoperability Directive 2008/57/EC.
Part 1 of this European Standard deals with the technical railway requirements; Part 2 deals with requirements for the trailer to be declared conformant by the manufacturer, except in the case of trailers classified in Annex 4 of the Machinery Directive 2006/42/EC which require conformity check in conjunction with a notified body.
Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels, and underground infrastructures.
This European Standard is also applicable to trailers and associated equipment that in working configuration are partly supported on the ballast or the formation.
Where two or more trailers are used together to transport loads in a fixed formation, e.g. where a metal container is fixed to two small trailers, the whole system is treated as a trailer for the purposes of compliance with the requirements of this European Standard.
This European Standard does not apply to the following:
-   requirements for quality of the work or performance of the trailer;
-   specific requirements established by the railway infrastructure operator for the use of trailers, which will be the subject of negotiation between the manufacturer and the operator;
-   separate machines temporarily mounted on the trailer.
This European Standard does not establish the additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding, etc;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. work in tunnels or in cuttings, extreme environmental conditions (below – 20 °C or above + 40 °C), corrosive environment, contaminating environments, strong magnetic fields;
-   hazards due to errors in software;
-   hazards occurring when used to handle suspended loads which may swing freely.
The intended use of these trailers may have operational parameters specified by each infrastructure manager; for example the maximum speed allowed for these trailers is likely to be limited by the infrastructure manager
- compliance with the clauses of this standard does not confer permission for trailers to travel at this speed. These trailers will not be allowed on a track open to normal railway traffic.
1.2   Validity of this European Standard
This European Standard applies to all trailers, which are ordered one year after the publication date by CEN of this standard.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 22476 specifies the equipment requirements, execution of and reporting on the Ménard pressuremeter test. NOTE 1 This part of ISO 22476 fulfils the requirements for the Ménard pressurermeter test, as part of the geotechnical investigation and testing according to EN 1997-1 and EN 1997-2. This part of ISO 22476 describes the procedure for conducting a Ménard pressuremeter test in natural soils, treated or untreated fills and in weak rocks, either on land or off-shore. The pressuremeter test results of this part of ISO 22476 are suited to a quantitative determination of ground strength and deformation parameters. They may yield lithological information. They can also be combined with direct investigation (e.g. sampling according to ISO 22475-1) or compared with other in situ tests (see EN 1997-2:2007, 2.4.1.4(2) P, 4.1 (1) P and 4.2.3(2) P). The Ménard pressuremeter test is performed by the radial expansion of a tricell probe placed in the ground (see Figure 1). During the injection of the liquid volume in the probe, the inflation of the three cells first brings the outer cover of the probe into contact with the pocket wall and then presses on them resulting in a soil displacement. Pressure applied to and the associated volume expansion of the probe are measured and recorded so as to obtain the stress-strain relationship of the soil as tested. Together with results of investigations with ISO 22475-1 being available, or at least with identification and description of the ground according to ISO 14688-1 and ISO 14689-1 obtained during the pressuremeter test operations, the test results of this part of ISO 22476 are suited to the quantitative determination of a ground profile, including
— the Ménard EM modulus,
— the Ménard limit pressure pLM and
— the Ménard creep pressure pfM.
This part of ISO 22476 refers to a probe historically described as the 60 mm G type probe. This part of ISO 22476 applies to test depths limited to 50 m and test pressure limited to 5 MPa. NOTE 2 Ménard pressuremeter tests are carried out with other probe diameters and pocket dimensions such as shown
below.
Two alternative methods of measurement are provided as follows.
— Procedure A: data are recorded manually.
— Procedure B: data are recorded automatically.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the technical requirements to minimize the specific railway hazards of trailers and associated equipment, which can arise during the commissioning, the operation and the maintenance of trailers when carried out in accordance with the specification given by the manufacturer or his authorized representative. This European Standard applies to trailers that are not intended to interact with operate signalling and control systems. Other machines are dealt with in other European Standards; see Annex E. These trailers are not designed or intended for operating signalling and control systems and are only intended to work and run under special operating conditions specifically designated by the infrastructure manager.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to trailers, as defined in the scope of EN 15954-1, including machinery, attachments and equipment permanently fixed to the trailer, intended for construction, maintenance and/or inspection of the railway infrastructure, emergency rescue and recovery. This European Standard specifies the technical requirements to deal with the common hazards during transport, assembly and installation, commissioning, running on track, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the trailers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer; see Clause 4. NOTE Specific measures for exceptional circumstances are not dealt with in this European Standard. They can be
the subject of negotiation between manufacturer and the machine operator. The common hazards dealt with include the general hazards presented by the trailers, as well as the hazards presented by the following specific trailer functions:
- track renewal;- rail maintenance;
- craning;
- catenary renewal / maintenance;
- maintenance of the components of the infrastructure;
- inspection and measurement of the components of the infrastructure;
- tunnel inspection / ventilation;
- emergency rescue and recovery
during commissioning, use, maintenance and servicing. This European Standard applies to trailers that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards; see Annex D. It is assumed that a finished standard automotive chassis used as a host for a road-rail trailer will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard. This European Standard does not deal with:
a) requirements with regard to the quality of work and the performance of trailers;
b) specific requirements established by a railway infrastructure manager;
c) negotiations between the manufacturer and the trailer operator for additional or alternative requirements;
d) requirements for use and running of the trailer on public highway;
e) hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h;
f) requirements which could be necessary in case of use in extreme conditions, such as:
1) extreme ambient temperatures (below – 20°C or above + 40°C);
2) highly corrosive or contaminating environment, e.g. due to the presence of chemicals;
3) potentially explosive atmospheres.
This European Standard applies to all trailers that are ordered one year after the publication date by CEN of this standard.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys intended for work on tracks as listed in Clause 4 which can arise during the commissioning, operation and maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the performance of the machines, e.g. cutting, drilling, grinding.
This European Standard applies to portable machines and trolleys with rail wheels or rollers designed for work whilst on the track with nominal track gauges of 1 435 mm and 1 668 mm and clearance gauge as defined in Annex B including, e.g. cutting and drilling machines.
This European Standard does not apply to the additional hazards that may exist due to:
-   the coupling together of trolleys;
-   the towing or pushing of trolleys by other vehicles;
-   the use of trolleys for the transportation of persons;
-   self propelled rail wheeled machines, trolleys coupled to another towing vehicle;
-   hazards due to laser systems.
Other special vehicles used on railway tracks are dealt with in other European Standards, see Annex H.
This European Standard does not apply to the following ):
-   requirements for quality of the work or performance of the machine;
-   regulations defined by each infrastructure controller for portable machine and trolley operation which shall be the subject of negotiation between the user and the manufacturer;
-   portable machines used from railway vehicles.
This European Standard establishes the additional requirements for electromagnetic compatibility due to e.g. electronic components as well as for hazards due to vibration.
This European Standard does not establish the additional requirements for the following:
(....)

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys intended for work on tracks as listed in Clause 4 which can arise during the commissioning, operation and maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the performance of the machines, e.g. cutting, drilling, grinding. This European Standard applies to portable machines and trolleys with rail wheels or rollers designed for work whilst on the track with nominal track gauges of 1435 mm and 1668 mm and clearance gauge as defined in Annex B1) including, e.g. cutting and drilling machines. Other special vehicles used on railway tracks are dealt with in other European Standards, see Annex H. This European Standard establishes the additional requirements for electromagnetic compatibility due to e.g. electronic components as well as for hazards due to vibration.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the general safety requirements for demountable machines and trailers, including road-rail trailers - henceforward referred to as ‘machines, for use when travelling and working on railway track.
NOTE   Trailers, including road-rail trailers, are considered as machines because they are moved along the track by powered machines.
This document specifies the requirements to deal with the common hazards presented by their use on the railway during transport, assembly and installation, commissioning, travelling and working on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines and associated equipment when they are used as intended and under conditions of misuse which are reasonably foreseeable.
These machines will not run on railway lines open to normal traffic.
NOTE   Other rail mounted railway maintenance and infrastructure inspection machines are dealt with in other European standards, see Technical Report CEN/TR 17498:2020.
This document is also applicable to machines and associated equipment that in working mode are partly supported on the ballast or the formation.
The requirements in this document are based on the assumption that the machines are used, operated and maintained by skilled person(s).
This document does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   use of separate equipment temporarily mounted on machines;
-   machines that utilize external power supplies such as the overhead contact line system for traction purposes or as a power source;
-   hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h;
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. corrosive environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.

  • Draft
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the general safety requirements for demountable machines and trailers, including road-rail trailers - henceforward referred to as ‘machines, for use when travelling and working on railway track.
NOTE   Trailers, including road-rail trailers, are considered as machines because they are moved along the track by powered machines.
This document specifies the requirements to deal with the common hazards presented by their use on the railway during transport, assembly and installation, commissioning, travelling and working on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines and associated equipment when they are used as intended and under conditions of misuse which are reasonably foreseeable.
These machines will not run on railway lines open to normal traffic.
NOTE   Other rail mounted railway maintenance and infrastructure inspection machines are dealt with in other European standards, see Technical Report CEN/TR 17498:2020.
This document is also applicable to machines and associated equipment that in working mode are partly supported on the ballast or the formation.
The requirements in this document are based on the assumption that the machines are used, operated and maintained by skilled person(s).
This document does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   use of separate equipment temporarily mounted on machines;
-   machines that utilize external power supplies such as the overhead contact line system for traction purposes or as a power source;
-   hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h;
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. corrosive environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.

  • Draft
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the general safety requirements for demountable machines and trailers, including road-rail trailers - henceforward referred to as ‘machines, for use when travelling and working on railway track.
NOTE   Trailers, including road-rail trailers, are considered as machines because they are moved along the track by powered machines.
This document specifies the requirements to deal with the common hazards presented by their use on the railway during transport, assembly and installation, commissioning, travelling and working on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines and associated equipment when they are used as intended and under conditions of misuse which are reasonably foreseeable.
These machines will not run on railway lines open to normal traffic.
NOTE   Other rail mounted railway maintenance and infrastructure inspection machines are dealt with in other European standards, see Technical Report CEN/TR 17498:2020.
This document is also applicable to machines and associated equipment that in working mode are partly supported on the ballast or the formation.
The requirements in this document are based on the assumption that the machines are used, operated and maintained by skilled person(s).
This document does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   use of separate equipment temporarily mounted on machines;
-   machines that utilize external power supplies such as the overhead contact line system for traction purposes or as a power source;
-   hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h;
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. corrosive environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.

  • Draft
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for demountable machines and trailers, including road-rail trailers - henceforward referred to as ‘machines’.
NOTE   Trailers, including road-rail trailers, are considered as machines because they are moved along the track by powered machines.
This document specifies the requirements to deal with the common hazards presented by their use on the railway during transport, assembly and installation, commissioning, travelling and working on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines and associated equipment when they are used as intended and under conditions of misuse which are reasonably foreseeable.
These machines are not designed nor intended to operate signalling and control systems and are only designed and intended to work and travel under special operating conditions in accordance with those permitted by the infrastructure managers. These machines are not permitted to run on railway lines open to normal traffic.
NOTE   Other rail mounted railway maintenance and infrastructure inspection machines are dealt with in other European standards, see Technical Report CEN/TR 17498:2020.
This document is also applicable to machines and associated equipment that in working mode are partly supported on the ballast or the formation.
The requirements in this document are based on the assumption that the machines are used, operated and maintained by skilled person(s).
This document does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   use of separate equipment temporarily mounted on machines;
-   machines that utilize the overhead contact line system for traction purposes or as a power source;
-   hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. corrosive environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for demountable machines and trailers, including road-rail trailers – henceforward referred to as ‘machines’.
This European Standard specifies the requirements to deal with the common hazards during transport, assembly and installation, commissioning, travelling and working on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines and associated equipment when they are used as intended and under conditions of misuse which are reasonably foreseeable; see Clause [tba].
This European standard deals with the requirements for the machine to be declared conformant by the manufacturer to the Machinery Directive (2006/42/EC), see Annex ZA, together with additional specific technical railway requirements.
These machines are not designed nor intended to operate signalling and control systems and are only designed and intended to work and travel under special operating conditions specifically designated by the infrastructure manager. These machines are not classified as ‘vehicles’ as defined in the Interoperability Directive 2008/57/EC and are not permitted to run on the railway lines open to normal traffic. Other machines are dealt with in other European Standards; see Annex [tba].
Additional requirements can apply for travelling and working on infrastructures with narrow gauge or broad gauge lines, lines of urban rail, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is also applicable to machines and associated equipment that in working mode are partly supported on the ballast or the formation.
The common hazards dealt with include the general hazards presented by the machines, as well as the hazards presented by the following specific machine functions:
- excavation;
- ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;
- track renewal;
- rail maintenance;
- craning;
- catenary renewal / maintenance;
- maintenance of the components of the infrastructure;
- inspection and measurement of the components of the infrastructure;
- tunnel inspection / ventilation;
- shunting;
- emergency rescue and recovery;
This European Standard does not apply to the following:
- requirements for quality of the work or performance of the machine;
- specific requirements established by the railway infrastructure operator for the use of machines, which will be the subject of negotiation;
- separate equipment temporarily mounted on machines.
- machines that utilise the catenary for traction purposes;
- hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h
This European Standard does not establish additional requirements for the following:
- operation subject to special rules, e.g. potentially explosive atmospheres;
- hazards due to natural causes, e.g. earthquake, lightning, flooding;
- working methods;
- operation in severe working conditions requiring special measures, e.g. work in tunnels or in cuttings, extreme environmental conditions (below – 20 °C or above + 40 °C), corrosive environments, contaminating environments, strong magnetic fields;
- hazards due to errors in software;
- hazards occurring when used to handle suspended loads which may swing freely.
The maximum speed allowed for these machines is likely to be limited by the infrastructure manager; compliance with the clauses of this standard does not confer permission for machines to travel at this speed.
It is assumed that a finished standard automotive chassis used as a host for a demountable machine will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard.

  • Draft
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for demountable machines and trailers, including road-rail trailers – henceforward referred to as ‘machines’.
This European Standard specifies the requirements to deal with the common hazards during transport, assembly and installation, commissioning, travelling and working on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines and associated equipment when they are used as intended and under conditions of misuse which are reasonably foreseeable; see Clause [tba].
This European standard deals with the requirements for the machine to be declared conformant by the manufacturer to the Machinery Directive (2006/42/EC), see Annex ZA, together with additional specific technical railway requirements.
These machines are not designed nor intended to operate signalling and control systems and are only designed and intended to work and travel under special operating conditions specifically designated by the infrastructure manager. These machines are not classified as ‘vehicles’ as defined in the Interoperability Directive 2008/57/EC and are not permitted to run on the railway lines open to normal traffic. Other machines are dealt with in other European Standards; see Annex [tba].
Additional requirements can apply for travelling and working on infrastructures with narrow gauge or broad gauge lines, lines of urban rail, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is also applicable to machines and associated equipment that in working mode are partly supported on the ballast or the formation.
The common hazards dealt with include the general hazards presented by the machines, as well as the hazards presented by the following specific machine functions:
- excavation;
- ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;
- track renewal;
- rail maintenance;
- craning;
- catenary renewal / maintenance;
- maintenance of the components of the infrastructure;
- inspection and measurement of the components of the infrastructure;
- tunnel inspection / ventilation;
- shunting;
- emergency rescue and recovery;
This European Standard does not apply to the following:
- requirements for quality of the work or performance of the machine;
- specific requirements established by the railway infrastructure operator for the use of machines, which will be the subject of negotiation;
- separate equipment temporarily mounted on machines.
- machines that utilise the catenary for traction purposes;
- hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h
This European Standard does not establish additional requirements for the following:
- operation subject to special rules, e.g. potentially explosive atmospheres;
- hazards due to natural causes, e.g. earthquake, lightning, flooding;
- working methods;
- operation in severe working conditions requiring special measures, e.g. work in tunnels or in cuttings, extreme environmental conditions (below – 20 °C or above + 40 °C), corrosive environments, contaminating environments, strong magnetic fields;
- hazards due to errors in software;
- hazards occurring when used to handle suspended loads which may swing freely.
The maximum speed allowed for these machines is likely to be limited by the infrastructure manager; compliance with the clauses of this standard does not confer permission for machines to travel at this speed.
It is assumed that a finished standard automotive chassis used as a host for a demountable machine will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard.

  • Draft
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the design, construction and operation of platform barrier systems positioned at the edge of a station platform immediately adjacent to rail or other guided vehicles in stations and boarding points for passenger services and includes:
-   requirements for the fixed structure and fixed parts along the platform;
-   physical requirements for the movable doors and gates normally used by passengers;
-   requirements for emergency doors;
-   requirements for driver access doors;
-   requirements for platform extremity doors;
-   requirements for management of safety risks that are particular to barrier systems.
This European Standard also gives requirements for the integration of barriers with the overall rail system including:
-   synchronization of vehicle and platform barrier doors or gates;
-   audible and visible alerts;
-   integrity of control systems;
-   testing of the barrier installation;
-   operational performance;
-   requirements relating to other interfacing sub-systems, notably signalling and vehicles.
For barrier systems set back from the platform edge, which are used to control access to trains or for crowd management, relevant sections of the document can be used as guidance.
This European Standard applies to all actors involved in the implementation and system integration of a platform barrier system, including owners, designers, installers and operators.
This European Standard does not cover barrier systems using bars, ropes, etc. or which operate in a vertical direction. Nevertheless, compliance with relevant clauses from this document can be used in developing safety justifications for these alternative types of barrier system.
This European Standard applies to light rail services, e.g. metro and tramway systems and heavy rail services as requested by a project specification. It applies to small systems, working in conjunction with a single vehicle, or with larger systems working with a complete train.
This European Standard applies to platform barrier systems used at sub-surface stations, enclosed surface stations (e.g. those enclosed for the purposes of providing an air-conditioned environment for waiting passengers), and those fully in the open-air.
This European Standard does not cover normative requirements relating to fire performance or fire requirements arising from use of platform barrier systems as fire barriers.

  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the design, construction and operation of platform barrier systems positioned at the edge of a station platform immediately adjacent to rail or other guided vehicles in stations and boarding points for passenger services and includes:
-   requirements for the fixed structure and fixed parts along the platform;
-   physical requirements for the movable doors and gates normally used by passengers;
-   requirements for emergency doors;
-   requirements for driver access doors;
-   requirements for platform extremity doors;
-   requirements for management of safety risks that are particular to barrier systems.
This European Standard also gives requirements for the integration of barriers with the overall rail system including:
-   synchronization of vehicle and platform barrier doors or gates;
-   audible and visible alerts;
-   integrity of control systems;
-   testing of the barrier installation;
-   operational performance;
-   requirements relating to other interfacing sub-systems, notably signalling and vehicles.
For barrier systems set back from the platform edge, which are used to control access to trains or for crowd management, relevant sections of the document can be used as guidance.
This European Standard applies to all actors involved in the implementation and system integration of a platform barrier system, including owners, designers, installers and operators.
This European Standard does not cover barrier systems using bars, ropes, etc. or which operate in a vertical direction. Nevertheless, compliance with relevant clauses from this document can be used in developing safety justifications for these alternative types of barrier system.
This European Standard applies to light rail services, e.g. metro and tramway systems and heavy rail services as requested by a project specification. It applies to small systems, working in conjunction with a single vehicle, or with larger systems working with a complete train.
This European Standard applies to platform barrier systems used at sub-surface stations, enclosed surface stations (e.g. those enclosed for the purposes of providing an air-conditioned environment for waiting passengers), and those fully in the open-air.
This European Standard does not cover normative requirements relating to fire performance or fire requirements arising from use of platform barrier systems as fire barriers.

  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the significant hazards, hazardous situations and events, common to trailers, as defined in the scope of prEN xxxyy-1:2009, intended for construction, maintenance and/or inspection of the railway infrastructure, emergency rescue and recovery, when they are used as intended by the manufacturer, see clause 4. The manufacturer shall give warning of the risks concerning the conditions of misuse which are reasonably foreseeable.
This European Standard deals with the common hazards during transport, assembly and installation, commissioning, running on track, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the trailers.
NOTE   Specific measures for exceptional circumstances are not dealt with in this European Standard. They can be subject of negotiation between manufacturer and the operator.
The common hazards dealt with include the general hazards presented by the trailers, and also the hazards presented by the following specific trailer functions:
-   track renewal;
-   rail maintenance;
-   craning;
-   catenary renewal / maintenance;
-   maintenance of the components of the infrastructure;
-   inspection and measurement of the components of the infrastructure;
-   tunnel inspection / ventilation;
   emergency rescue and recovery
during commissioning, use, maintenance and servicing.
This European Standard applies to trailers that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D.
It is assumed that a finished standard automotive chassis used as a host for a road-rail trailer will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard.

  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the technical requirements to minimize the specific railway hazards of trailers and associated equipment, which can arise during the commissioning, the operation and the maintenance of trailers when carried out in accordance with the specification given by the manufacturer or his authorized representative. This European Standards applies to trailers that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards,
see Annex G.
Note   Machines not intended for operating signalling and control systems are only permitted to run under special conditions and within areas specifically designated by the infrastructure manager.
Part 1 of this European Standard deals with requirements for approval of the trailer by an authorized body, part 2 deals with requirements for the trailer to be declared conformant by the manufacturer, except in the case of trailers classified in Annex 4 of the Machinery Directive which require conformity check in conjunction with a notified body.
Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilizing other than adhesion between the rail and rail wheels, and underground infrastructures.
This European Standard is also applicable for trailers and associated equipment that in working configuration are partly supported on the ballast or the formation.
Where two or more trailers are used together to transport loads in a fixed formation, e.g. where a metal container is fixed to two small trailers, the whole system shall be treated as a trailer and comply with the requirements of this European Standard.

  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard deals with the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.
This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D.
This European Standard deals with the common hazards, in normal circumstances, during transport, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures (less than - 20 °C or greater than + 40 °C), highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Air pressure caused by the passing of high-speed trains at more than 190 km/h is also not dealt with.
NOTE 1   Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manuf

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the technical requirements to minimize the specific railway hazards of self propelled demountable machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of these machines when carried out in accordance with the specification given by the manufacturer or his authorised representative. This European Standard applies to machines that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex F.
NOTE   Machines not intended for operating signalling and control systems are only permitted to run under special conditions and within areas specifically designated by the infrastructure manager.
Part 1 of this standard deals with the requirements for approval of machines by an authorised body; part 2 deals with the requirements for the machine to be declared conformant by the manufacturer, except in the case of machines classified in Machinery Directive, Annex 4 which requires conformity check in conjunction with a notified body.
Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is also applicable for machines and associated equipment that in working configuration are partly supported on the ballast or the formation.
This European Standard does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   specific requirements established by the railway infrastructure operator for the use of machines, which will be the subject of negotiation between the manufacturer and the purchaser;
-   separate machines temporarily mounted on demountable machines and associated equipment.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the significant hazards, hazardous situations and events, common to trailers, as defined in the scope of prEN xxxyy-1:2009, intended for construction, maintenance and/or inspection of the railway infrastructure, emergency rescue and recovery, when they are used as intended by the manufacturer, see clause 4. The manufacturer shall give warning of the risks concerning the conditions of misuse which are reasonably foreseeable.
This European Standard deals with the common hazards during transport, assembly and installation, commissioning, running on track, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the trailers.
NOTE   Specific measures for exceptional circumstances are not dealt with in this European Standard. They can be subject of negotiation between manufacturer and the operator.
The common hazards dealt with include the general hazards presented by the trailers, and also the hazards presented by the following specific trailer functions:
-   track renewal;
-   rail maintenance;
-   craning;
-   catenary renewal / maintenance;
-   maintenance of the components of the infrastructure;
-   inspection and measurement of the components of the infrastructure;
-   tunnel inspection / ventilation;
   emergency rescue and recovery
during commissioning, use, maintenance and servicing.
This European Standard applies to trailers that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D.
It is assumed that a finished standard automotive chassis used as a host for a road-rail trailer will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard.

  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the technical requirements to minimize the specific railway hazards of trailers and associated equipment, which can arise during the commissioning, the operation and the maintenance of trailers when carried out in accordance with the specification given by the manufacturer or his authorized representative. This European Standards applies to trailers that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards,
see Annex G.
Note   Machines not intended for operating signalling and control systems are only permitted to run under special conditions and within areas specifically designated by the infrastructure manager.
Part 1 of this European Standard deals with requirements for approval of the trailer by an authorized body, part 2 deals with requirements for the trailer to be declared conformant by the manufacturer, except in the case of trailers classified in Annex 4 of the Machinery Directive which require conformity check in conjunction with a notified body.
Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilizing other than adhesion between the rail and rail wheels, and underground infrastructures.
This European Standard is also applicable for trailers and associated equipment that in working configuration are partly supported on the ballast or the formation.
Where two or more trailers are used together to transport loads in a fixed formation, e.g. where a metal container is fixed to two small trailers, the whole system shall be treated as a trailer and comply with the requirements of this European Standard.

  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the technical requirements to minimize the specific railway hazards of self propelled demountable machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of these machines when carried out in accordance with the specification given by the manufacturer or his authorised representative. This European Standard applies to machines that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex F.
NOTE   Machines not intended for operating signalling and control systems are only permitted to run under special conditions and within areas specifically designated by the infrastructure manager.
Part 1 of this standard deals with the requirements for approval of machines by an authorised body; part 2 deals with the requirements for the machine to be declared conformant by the manufacturer, except in the case of machines classified in Machinery Directive, Annex 4 which requires conformity check in conjunction with a notified body.
Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is also applicable for machines and associated equipment that in working configuration are partly supported on the ballast or the formation.
This European Standard does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   specific requirements established by the railway infrastructure operator for the use of machines, which will be the subject of negotiation between the manufacturer and the purchaser;
-   separate machines temporarily mounted on demountable machines and associated equipment.

  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the significant hazards, hazardous situations and events, common to demountable machines, as defined in prEN xxxzz-1, intended for construction, maintenance inspection of the railway infrastructure, shunting and emergency rescue vehicles, when they are used as intended by the manufacturer, see clause 4. The manufacturer shall give warning of the risks concerning the conditions of misuse which are reasonably foreseeable .
This European Standard deals with the common hazards during transport, assembly and installation, commissioning, running on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines.
NOTE   Specific measures for exceptional circumstances are not dealt with in this European Standard. They can be subject of negotiation between manufacturer and the operator.
The common hazards dealt with include the general hazards presented by the machines, and also the hazards presented by the following specific machine functions:
-   excavation;
-   ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;
-   track renewal;
-   rail maintenance;
-   craning;
-   catenary renewal / maintenance;
-   maintenance of the components of the infrastructure;
-   inspection and measurement of the components of the infrastructure;
-   tunnel inspection / ventilation;
-   shunting;
-   emergency rescue and recovery
during commissioning, use, maintenance and servicing.
This European Standard applies to self propelled machines that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D.
It is assumed that a finished standard automotive chassis used as a host for a demountable machine will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard.

  • Draft
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with the technical requirements to minimize the specific railway hazards of self propelled demountable machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of these machines when carried out in accordance with the specification given by the manufacturer or his authorised representative. This European Standard applies to machines that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex F.
NOTE   Machines not intended for operating signalling and control systems are only permitted to run under special conditions and within areas specifically designated by the infrastructure manager.
Part 1 of this standard deals with the requirements for approval of machines by an authorised body; part 2 deals with the requirements for the machine to be declared conformant by the manufacturer, except in the case of machines classified in Machinery Directive, Annex 4 which requires conformity check in conjunction with a notified body.
Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is also applicable for machines and associated equipment that in working configuration are partly supported on the ballast or the formation.
This European Standard does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   specific requirements established by the railway infrastructure operator for the use of machines, which will be the subject of negotiation between the manufacturer and the purchaser;
-   separate machines temporarily mounted on demountable machines and associated equipment.

  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard defines the specific technical railway requirements for working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.
This European Standard applies to all railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising adhesion between the rail and rail wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.
This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex M.
Additional requirements can apply for working on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is applicable to 1 435 mm nominal track gauge. Some requirements may be applicable for working on infrastructures with nominal narrow track gauge or nominal broad track gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard covers the safety requirements for the railway specific problems for working on different infrastructures. The application of these requirements is the object of a verification procedure, which does not form part of this European Standard, but an Annex J is included for information. In all cases an authorisation to work is required to access the infrastructure.
   This European Standard is also applicable for machines that in working position are partly supported on the ballast or the formation.
   This European Standard does not apply to
-   the requirements with regard to the quality of work, including the related measuring methods, and the performance of the machine; )
-   the specific requirements established by each railway infrastructure manager for the use of machines which will be the subject of negotiation between the manufacturer and the infrastructure manager.
   This European Standard does not deal with the following additional requirements:
-   working methods;
-   operation in severe working conditions requiring special measures (e.g. work in tunnels or in cuttings, extreme environmental conditions such as freezer applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   hazards due to errors in software;
-   hazards occurring when used to handle suspended loads which may swing freely;
-   hazards due to wind pressure greater than normal e.g. pressures caused by the passing of trains at speed in excess of 190 km/h.
1.2   Validity of this European Standard
This European Standard applies to all machines, which are ordered after one year from the publication date of this European Standard.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.
This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D.
This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures (less than - 20 °C or greater than + 40 °C), highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Air pressure caused by the passing of high-speed trains at more than 190 km/h is also not dealt with.
NOTE 1   Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manufacturer and/or machine operator as referred to in the scope are not dealt with in this European Standard. When such additional measures are necessary, they should be agreed between the manufacturer and the machine operator. The manufacturer will be responsible for compliance with the Directive(s) concerned independent of this European Standard for additional hazards created by any additional or alternative requirements.
NOTE 2   This European Standard deals only with the additional hazards from the adaptation of a machine for its use on rail. Other standards specific to the particular machine as far as available will need to be used in addition to this European Standard to give the complete requirements.
The common hazards specified include the general hazards presented by the machines, and also the hazards presented by the following specific machine functions, common to two or more machine types:
-   ballast excavation, ballast cleaning, ballast regulating, ballast consolidating;
-   tamping;
-   track renewal;
-   craning;
-   maintenance of the components of the infrastructure;
during commissioning, use, maintenance and servicing.
This European Standard does not deal comprehensively with specific machine functions other than the common functions listed in the previous paragraph, or with all possible hazards presented by complete machines or by the combination of functions.
NOTE 3   For such specific functions or hazards, the use of specific European Standards is recommended.
This European Standard does not deal with:
-   requirements with regard to the quality of work and the performance of the machine;
-   machines that utilise the catenary for traction purposes;
-   specific requirements introduced by a railway infrastructure manager;
-   additional or alternative requirements introduced by the manufacturer and/or operator.
1.2   Validity of this European Standard
This European Standard applies to all machines, which are ordered after one year from the publication date

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment.
This European Standard applies to all rail bound machines and other vehicles – referred to as machines – running exclusively on the railway (utilising adhesion between the rail and wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex L.
Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and wheels, road-rail machines and underground infrastructures.
This Standard covers the requirements for the keeping of safety and access of railway traffic, railway specific problems for running on different infrastructures in relation to necessary movements of the machine as a train and movements to reach work sites. The application of these requirements is the object of a verification procedure, which does not form part of this Standard. Access to railway infrastructures requires in all cases an access permit.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard defines the specific technical railway requirements for working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.
This European Standard applies to all railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising adhesion between the rail and rail wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.
This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex M.
Additional requirements can apply for working on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard is applicable to 1 435 mm nominal track gauge. Some requirements may be applicable for working on infrastructures with nominal narrow track gauge or nominal broad track gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures.
This European Standard covers the safety requirements for the railway specific problems for working on different infrastructures. The application of these requirements is the object of a verification procedure, which does not form part of this European Standard, but an Annex J is included for information. In all cases an authorisation to work is required to access the infrastructure.
   This European Standard is also applicable for machines that in working position are partly supported on the ballast or the formation.
   This European Standard does not apply to
-   the requirements with regard to the quality of work, including the related measuring methods, and the performance of the machine; )
-   the specific requirements established by each railway infrastructure manager for the use of machines which will be the subject of negotiation between the manufacturer and the infrastructure manager.
   This European Standard does not deal with the following additional requirements:
-   working methods;
-   operation in severe working conditions requiring special measures (e.g. work in tunnels or in cuttings, extreme environmental conditions such as freezer applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   hazards due to errors in software;
-   hazards occurring when used to handle suspended loads which may swing freely;
-   hazards due to wind pressure greater than normal e.g. pressures caused by the passing of trains at speed in excess of 190 km/h.
1.2   Validity of this European Standard
This European Standard applies to all machines, which are ordered after one year from the publication date of this European Standard.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment.
This European Standard applies to all railbound machines and other vehicles – referred to as machines – running exclusively on the railway (utilising adhesion between the rail and wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other machines are dealt with in other European Standards, see Annex K.
Special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and wheels, road-rail machines and underground infrastructures.
This European Standard covers the requirements for safety and access of railway traffic, railway specific requirements for running on different infrastructures in relation to necessary movements of the machine as a train and movements to reach work sites.
1.2   Validity of the European Standard
This European Standard applies to new designs taking into consideration the recommendations given in Annex L on the application of the standard (migration rule).

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys used for work on tracks as listed in clause 4 and annex A which can arise during the commissioning, the operation and the maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the general function of the machines (e.g. cutting, drilling, grinding).
This document applies to portable machines and portable trolleys designed for work on the track with nominal track gauges of 1 435 mm and 1 668 mm and clearance gauge as defined in annex B including cutting machines and those designed for working on wooden sleepers.
This document does not apply to portable trolleys coupled together, whether or not self propelled, and trolleys used for transporting personnel.
For portable machines and trolleys used on railway lines with a different clearance gauge to that defined in
annex B specific requirements concerning the clearance gauge may apply ).
This document does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   regulations defined by each infrastructure controller for portable machine and trolley operation which shall be the subject of negotiation between the user and the manufacturer;
-   portable machines used from railway vehicles.
This document does not establish the additional requirements for the following:
-   operation in severe conditions (e.g. extreme environmental conditions such as: freezing applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields);
-   operation subject to special rules as potentially explosive atmospheres;
-   electromagnetic compatibility, due to e.g. electronic components;
-   hazards occurring during decommissioning and/or recycling;
-   hazards due to vibration;
-   hazards due to wind speed grea

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day