45.120 - Equipment for railway/cableway construction and maintenance

This technical report covers machines fitted with rail wheels that are used for the construction, maintenance, inspection, repair and renewal of railway infrastructure. It is also applicable to machines used for emergency rescue purposes on railway infrastructure.
NOTE inspection of the infrastructure includes measurement
This technical report explains the different modes of operation, types of machine and which standard covers the technical requirements, and guidance on the acceptance proces...view more

1.1   General
This European Standard deals with the technical requirements to minimize the specific railway hazards of railbound construction and maintenance machines - henceforward referred to as machines, intended for use on urban rail. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative.
The requirements in this standard amend those in EN...view more

1.1   General
This document deals with the technical requirements to minimize the specific railway hazards of railbound construction and maintenance machines - henceforward referred to as machines, intended for use on urban rail systems. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative.
The requirements in this standard amend those in EN ...view more

This standard provides the specific requirements for non-destructive testing (NDT) of wheelsets for:
— in-service inspection,
— off-vehicle inspection,
— NDT Personnel Certification (incl. training, qualification, renewal),
— NDT Procedure and Instruction,
— introduction of new NDT Techniques,
For this standard, the following NDT methods considered are:
— ultrasound testing (UT),
— magnetic particle testing (MT),
— eddy current testing (ET),
For application of these methods, a catalogue of commo...view more

1.1   General
This European Standard defines the specific technical railway requirements for working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.
This European Standard applies to all railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising adhesion between the rail and rail wheels) and used for constr...view more

1.1   General
This European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment.
This European Standard applies to all railbound machines and other vehicles – referred to as machines – running exclusively on the railway (utilising adhesion between the rail and wheels) and used for construction, maintenance and inspection...view more

1.1   General
This European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.
This European Standard ap...view more

1.1 General
This European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.
This European Standard ap...view more

1.1   General
This European Standard defines the specific technical railway requirements for travelling and working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.
This European Standard applies to all railbound machines and other vehicles- referred to as machines - working exclusively on the railway (utilizing adhesion between the rail and rail wheels) and u...view more

This European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment. Special national conditions applicable to specific member states are shown in Annex B.
This European Standard applies to all railbound machines and other vehicles - referred to as machines - running exclusively on the railway (utilizing adhesion between ...view more

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to demountable machines, as defined in EN 15955-1:2013, intended for construction, maintenance inspection of the railway infrastructure, shunting and emergency rescue vehicles. This European Standard specifies the technical requirements to deal with the common hazards during transport, assembly and installation, commissioning, running on track, use including s...view more

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to trailers, as defined in the scope of EN 15954-1, including machinery, attachments and equipment permanently fixed to the trailer, intended for construction, maintenance and/or inspection of the railway infrastructure, emergency rescue and recovery. This European Standard specifies the technical requirements to deal with the common hazards during transport, ...view more

This European Standard specifies the technical requirements to minimize the specific railway hazards of trailers and associated equipment, which can arise during the commissioning, the operation and the maintenance of trailers when carried out in accordance with the specification given by the manufacturer or his authorized representative. This European Standard applies to trailers that are not intended to interact with operate signalling and control systems. Other machines are dealt with in othe...view more

This part of ISO 22476 specifies the equipment requirements, execution of and reporting on the Ménard pressuremeter test. NOTE 1 This part of ISO 22476 fulfils the requirements for the Ménard pressurermeter test, as part of the geotechnical investigation and testing according to EN 1997-1 and EN 1997-2. This part of ISO 22476 describes the procedure for conducting a Ménard pressuremeter test in natural soils, treated or untreated fills and in weak rocks, either on land or off-shore. The pressure...view more

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to trailers, as defined in the scope of EN 15954-1, including machinery, attachments and equipment permanently fixed to the trailer, intended for construction, maintenance and/or inspection of the railway infrastructure, emergency rescue and recovery.
This European Standard specifies the technical requirements to deal with the common hazards during transport,...view more

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to demountable machines, as defined in EN 15955-1:2013, intended for construction, maintenance inspection of the railway infrastructure, shunting and emergency rescue vehicles.
This European Standard specifies the technical requirements to deal with the common hazards during transport, assembly and installation, commissioning, running on track, use including ...view more

1.1   General
This European Standard specifies the technical requirements to minimise the specific railway hazards of self propelled demountable machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of these machines when carried out in accordance with the specification given by the manufacturer or his authorised representative. These machines are not designed or intended to operate signalling and co...view more

1.1   General
This European Standard specifies the technical requirements to minimise the specific railway hazards of trailers and associated equipment, which can arise during the commissioning, the operation and the maintenance of trailers when carried out in accordance with the specification given by the manufacturer or his authorised representative. This European Standard applies to trailers that are not intended to interact with operating signalling and control systems. Other machines are dea...view more

This European Standard deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys intended for work on tracks as listed in Clause 4 which can arise during the commissioning, operation and maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the performance of the machines, e.g. cutting, drilling, grinding. This European Standard applies to ...view more

1.1   General
This European Standard deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys intended for work on tracks as listed in Clause 4 which can arise during the commissioning, operation and maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the performance of the machines, e.g. cutting, drilling, grinding.
This European Standa...view more