This document specifies the requirements for a two-components flexible polyurethane topcoat to be applied over EN 4687 and/or EN 4688 primers mainly for exterior aerospace applications.
The primer and the finish tested to this document will be from the same manufacturer applied in accordance with (i.a.w.) their instructions/Table 1.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document defines the requirements for a two-components, high corrosion inhibiting epoxy primer.
The coating shall be suitable for use on suitably prepared metallic substrates, chromic acid anodised, or conversion coated aluminium alloys and other suitably prepared substrates.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document describes the procedures for training personnel who will be involved in the operation of unmanned aircraft systems (UAS). This document defines: a) knowledge, skill, attitude and qualification criteria that are needed for UAS pilots and training organizations that provides training to trainees of UAS remote pilots and other personnel involved in UAS operations; b) training curriculum and contents for specific learning courses; c) qualification and confirmation criteria for the trai...view more

    • sale 15% off
    • Standard
      35 pages
      English language
    • sale 15% off
    • Draft
      35 pages
      English language
    • sale 15% off
    • Draft
      39 pages
      English language

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7500‑1, Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measurin...view more

    • sale 15% off
    • Standard
      17 pages
      English language
    • sale 15% off
    • Draft
      17 pages
      English language
    • sale 15% off
    • Draft
      18 pages
      English language

This document defines the requirements for a two-components, chromate and lead-free primer.
The coating shall be suitable for use on fibre reinforced composite materials, titanium and corrosion resistant steels and other suitably prepared corrosion resistant substrates.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Draft
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Draft
      3 pages
      English language

This document provides a series of standard testing methods to determine the resistance of flat or curved surfaces against abrasion, scratch or punch under high dynamics as may occur for example by manually operating actuators or due to impacts of materials like shoes, cases, bags and other common objects of everyday’s usage inside an aircraft cabin. The method is also suitable to test the resistance of a surface against all other high dynamic strains.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the monitoring of mechanical tests and inspections performed both at the
material (coupon) and at the structural scale by the implementation of kinematic field measurements by
digital image correlation. This document describes an in situ method for evaluating the metrological
performance of an extensometer system using image correlation for the delivery of displacement fields,
and by extrapolation, of deformation fields. It can be implemented prior to the actual start...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This document specifies the lead and runout requirements for rolled external threads for aerospace construction, and the inspection method to be used in case of dispute. It is applicable whenever it is referenced in a definition document.

    • sale 15% off
    • Draft
      10 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      English language

This document specifies the lead and runout thread and undercut requirements for internal threads (blind tapped holes) for aerospace construction. It is applicable whenever it is referenced in a definition document.

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Draft
      5 pages
      English language

This document specifies the electrolytic cadmium plating of parts and fasteners in steel of tensile strength Rm (max.)  1 450 MPa, copper, copper alloys and nickel alloys, whose temperature in service does not exceed 235 °C.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and test methods for the qualification of laser beam machines for metal powder bed additive manufacturing for aerospace applications.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the characteristics of adjustable rod-ends consisting of:
- a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265)
- a rod end with internal threaded shank
They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This document contains information on the design and operational practices for launch vehicle orbital stages for mitigating space debris. This document provides information to engineers on what are required or recommended in the family of space debris mitigation standards to reduce the growth of space debris by ensuring that spacecraft is designed, operated, and disposed of in a manner that prevents them from generating debris throughout their orbital lifetime.

    • sale 15% off
    • Technical report
      56 pages
      English language
    • sale 15% off
    • Draft
      56 pages
      English language

This document specifies the technical requirements to minimize the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of aircraft movement equipment when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorized representative. It also takes into account some performance requirements recognized as essential by authorities, aircraft an...view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      26 pages
      English language
    • e-Library read for
      1 day

This document provides detailed information on the various methods of assessing the health status of lithium-ion space batteries in flight and makes recommendations to battery suppliers, spacecraft manufacturers and operators to ease this assessment.

    • sale 15% off
    • Draft
      54 pages
      English language
    • sale 15% off
    • Technical report
      54 pages
      English language

This document specifies criteria and requirements for the use of explosive systems and explosive devices commonly used on spacecraft and other space products, including launch vehicles and space vehicle systems. It addresses the aspects of design, analysis, verification, manufacturing, operations and safety. To the greatest extent possible, requirements from past and existing standards have been analyzed, selected and tailored to be incorporated herein. In addition, the requirements herein inclu...view more

    • sale 15% off
    • Draft
      77 pages
      English language
    • sale 15% off
    • Standard
      77 pages
      English language

This document defines the requirements of ethylene propylene elastomer (EPM/EPDM) for seal elements for use as static seals in hydraulic systems using phosphate ester fluids, hardness 80 IRHD (International Rubber Hardness Degree) for long term application for aerospace application.
Unless otherwise specified in the drawing, order or inspection schedule, this document shall be used in conjunction with the referenced documents.
Applicable temperature range:
- Continuous service: −55 °C to 107 ...
view more

    • sale 10% off
    • Standard
      7 pages
      English language
    • e-Library read for
      1 day

This document specifies the dimensions, tolerances and required characteristics of protective plugs,
non-metallic, for NAS1760 fitting ends and AS33649 boss ports to seal fluid ports during transportation
and storage in order to prevent
 contamination by moisture, fluids, chemicals and particles,
 spillage inside package or aircraft section,
 port and pipe end damages and
 port and pipe clogging due to plug ingestion.
Because of the cleanliness requirements, parts shall only be used o...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This standard defines the requirements and recommendations for the design and test of RF components and equipment to achieve acceptable performance with respect to multipaction-free operation in service in space. The standard includes:
•   verification planning requirements,
•   definition of a route to conform to the requirements,
•   design and test margin requirements,
•   design and test requirements, and
•   informative annexes that provide guidelines on the design and test processes.
This standard i...
view more

    • sale 10% off
    • Standard
      74 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      74 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      92 pages
      English language
    • e-Library read for
      1 day

The scope of the SpaceFibre standard is the detailed specification a very high-speed serial link protocol stack reaching from link level Quality layer  down to the Physical layer. The higher layers like packet, network and higher level protocols are the same as for SpaceWire and specified in the respective standards ECSS-E-ST-50-12C and ECSS-E-ST-50-51C to 53C.

    • sale 10% off
    • Standard
      232 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      226 pages
      English language
    • e-Library read for
      1 day

This standard specifies requirements for the machine operator qualification of powder bed based laser
beam machines for additive manufacturing of metallic parts.
This document is applicable if the machine operator qualification testing is required by contract or by
application standards.
Note: The term "operator" refers to the machine operator not to the programmer.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies the dimensions, tolerances and required characteristics of protective plugs, non metallic, for EN 6123 fitting ends to seal fluid ports during transportation and storage in order to prevent:
- contamination by moisture, fluids, chemicals and particles;
- spillage inside package or aircraft section;
- port and pipe end damages;
- port and pipe clogging due to plug ingestion.
Because of the cleanliness requirements, parts shall only be used once.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This document specifies the dimensions, tolerances and required characteristics of protective caps, non metallic, for EN 6123 fitting ends to seal fluid ports during transportation and storage in order to prevent:
- contamination by moisture, fluids, chemicals and particles;
- spillage inside package or aircraft section;
- port and pipe end damages;
- port and pipe clogging due to plug ingestion.
Because of the cleanliness requirements, parts shall only be used once.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

The present document is applicable to deployed non-cooperative sensor as a constituent of an Advanced Surface
Movement Guidance and Control System (A-SMGCS).
The present document provides a European Standard for manufacturers, Air Navigation Service Providers and/or
Airport Operators, who have to demonstrate and declare compliance of their systems and constituents to the Essential
Requirements (ERs) of Annex VIII of Regulation (EU) 2018/1139 [i.7].
NOTE 1: The ERs in Annex VIII of Regulatio...
view more

    • sale 15% off
    • Standard
      36 pages
      English language
    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      36 pages
      English language

The present document is applicable to deployed non-cooperative SMR sensor as a constituent of an Advanced Surface
Movement Guidance and Control System (A-SMGCS).
NOTE 1: Generic requirements for a non-cooperative sensor are defined in ETSI EN 303 213-4-1 [1].
The present document provides a European Standard for manufacturers, Air Navigation Service Providers and/or
Airport Operators, who have to demonstrate and declare compliance of their systems and constituents to the Essential
Requireme...
view more

    • sale 15% off
    • Standard
      34 pages
      English language
    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      34 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      34 pages
      English language

This standard specifies the requirements, also known as "relifing requirements", for the planned, intentional storage, control, and removal from storage of electronic, electrical and electromechanical parts which are intended to be used for space applications.
This standard covers the relifing of all components as defined by ECSS-Q-ST-60 and ECSS-Q-ST-60-13.
The relifing process is a lot quality control activity.  The inspections and tests defined do not constitute an up-screening or up-gradin...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      32 pages
      English language
    • e-Library read for
      1 day

This activity will be the update of EN16603-20-06 (published 2014).
This activity was started in ECSS to implement as urgent classified Change Requests.

    • sale 10% off
    • Standard
      124 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      124 pages
      English language
    • e-Library read for
      1 day

This Standard establishes the basic rules and general principles applicable to the electrical, electronic, electromagnetic, microwave and engineering processes. It specifies the tasks of these engineering processes and the basic performance and design requirements in each discipline.
It defines the terminology for the activities within these areas.
It defines the specific requirements for electrical subsystems and payloads, deriving from the system engineering requirements laid out in ECSS-E-ST-...
view more

    • sale 10% off
    • Standard
      128 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      128 pages
      English language
    • e-Library read for
      1 day

This Standard specifies star sensor performances as part of a space project. The Standard covers all aspects of performances, including nomenclature, definitions, and performance requirements for the performance specification of star sensors.
The Standard focuses on:
- performance specifications (including the impact of temperature, radiation and straylight environments);
- robustness (ability to maintain functionalities under non nominal environmental conditions).
Other specification types...
view more

    • sale 10% off
    • Standard
      88 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      89 pages
      English language
    • e-Library read for
      1 day

This document specifies methods and procedures for characterizing the responses of devices used
for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in
civilian aircraft. The methods and procedures are intended to be understood as minimum requirements.

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day

This document specifies the characteristics of worm drive clamps designed for use with suitable rubber
hoses to form joints in fluid system pipelines for aerospace applications.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of conveyor belt vehicles when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some requirements recognised as essential by authorities, aircraft an...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This document specifies the conceptual basis for the determination of ambient dose equivalent for the
evaluation of exposure to cosmic radiation in civilian aircraft and for the calibration of instruments
used for that purpose.

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day

1.1   Purpose:
The "Scheduling and Commanding Messages" (SCM) specifies a standard format for observing system commanding and scheduling. This document aims to ease the planning and operation processes and to reduce the effors from researchers that use several different observing systems and/or simulation software products.
The SCM establishes a common language for exchanging information on planning, scheduling, and executing observations of celestial objects. In the end this will:
a)   Facilitat...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      64 pages
      English language
    • e-Library read for
      1 day

This document provides requirements and guidance for the retention, storage, retrieval and disposal of
records for the international aviation, space and defense industry.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

1.1   Application:
This document defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g. engine, aircraft, spacecraft, helicopter), if specified by contract.
Reporting of noncon...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      19 pages
      English language
    • e-Library read for
      1 day

1.1   Purpose:
The Observing System Data Message (OSDM) is a standard message format to be used in the exchange of optical telescope, laser ranging station, and radar (observing systems) information between Space situational Awareness (SSA) data providers, owners/operators of observing systems, and other parties. These messages can inform SSA data providers, which are the consumers of observing system output data, on the parameters of the observing systems.
The OSDM standard will:
a)   enable con...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day

This document establishes general test requirements for launch vehicles equipped with liquid-propellant engines, launched from stationary ground-, sea- and air-based launchers, in all phases of their development.

    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 15% off
    • Draft
      37 pages
      English language

The present document is applicable to Advanced Surface Movement Guidance and Control System (A-SMGCS)
Surveillance Service. This system provides enhanced surveillance functionalities, as well as a display to controllers with
accurate and unambiguous identity and position information on the entire manoeuvring and movement area of
aerodromes.
The present document provides a European Standard for manufacturers, Air Navigation Service Providers and/or
Airport Operators, who have to demonstrate ...
view more

    • sale 10% off
    • Standard
      46 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      46 pages
      English language
    • sale 10% off
    • Draft
      46 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      46 pages
      English language
    • sale 10% off
    • Draft
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language

This document specifies the conceptual basis for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian aircraft and for the calibration of instruments used for that purpose.

    • sale 15% off
    • Standard
      27 pages
      English language
    • sale 15% off
    • Standard
      29 pages
      French language
    • sale 15% off
    • Draft
      27 pages
      English language

This document provides requirements for launch system designers or interface designers regarding interfaces between LV and EGSE, which is used to support on-line processing. It defines electrical interface types, design requirements, environment requirements, verification methods (analyses and tests), and interface check operation requirements. This document is intended to minimize design costs and reduce risks from errors resulting from miscommunication. It does not limit LV or EGSE organizatio...view more

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Draft
      10 pages
      English language

This document specifies methods and procedures for characterizing the responses of devices used for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian aircraft. The methods and procedures are intended to be understood as minimum requirements.

    • sale 15% off
    • Standard
      36 pages
      English language
    • sale 15% off
    • Standard
      37 pages
      French language
    • sale 15% off
    • Draft
      36 pages
      English language

The present document is applicable to the Advanced Surface Movement Guidance and Control System (A-SMGCS)
Routing Service. This service is based on the A-SMGCS surveillance service as specified in ETSI EN 303 213-1 [3]
and generates individual routes for mobiles based on the trajectory start and end points and known constraints (e.g.
standard taxi routes, taxiway closures). In most cases these trajectory points for aircraft are the assigned runway holding
point and parking stand, or for vehi...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      36 pages
      English language
    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      36 pages
      English language

The present document is applicable to the Advanced Surface Movement Guidance and Control System (A-SMGCS)
airport safety support service. This service is based on the A-SMGCS surveillance service (as specified in ETSI
EN 303 213-1 [3]) and provides safety net functionalities to controllers with timely, accurate and unambiguous
information and alerts covering the entire manoeuvring and movement area of aerodromes.
The present document provides a European Standard for manufacturers, Air Naviga...
view more

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      39 pages
      English language
    • sale 10% off
    • Draft
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      40 pages
      English language

REN/ERM-TGAERO-37-1

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      44 pages
      English language
    • sale 10% off
    • Draft
      44 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      44 pages
      English language

This document specifies the minimum requirements for airworthiness approval of air cargo pallets, nets and containers, generally designated as air cargo unit load devices (ULD). This document is intended to provide a uniform technical reference for air cargo unit load devices approval. As a prerequisite, it is presupposed that the applicable general civil aviation requirements and the aircraft manufacturer's approved Weight and Balance Manual are followed. This document defines the minimum perfo...view more

    • sale 15% off
    • Standard
      46 pages
      English language
    • sale 15% off
    • Draft
      46 pages
      English language

This document specifies the dimensions of connections for starting aircraft engines by air, which are necessary to ensure international interchangeability of connectors with adaptors. lt also gives the minimum clearances required on the aircraft to provide adequate access for the ground adaptor.

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Draft
      5 pages
      English language

In general terms, the scope of the consolidation of the electrical interface
requirements for electrical (hold down and release or deployment) actuators in
the present ECSS-E-ST-20-21 and the relevant explanation in the handbook
ECSS-E-HB-20-21 is to allow a more recurrent approach both for actuator
electronics (power source) and electrical actuators (power load) offered by the
relevant manufacturers, at the benefit of the system integrators and of the
Agency, thus ensuring:
• better qual...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      37 pages
      English language
    • e-Library read for
      1 day