53.100 - Earth-moving machinery

This document establishes the terminology and content of commercial specifications for hydraulic breakers which are mounted as an attachment on a carrier, typically earth-moving machinery such as an excavator, backhoe loader, skid steer loader, and compact loader as defined in ISO 6165; or mounted on a rig, pedestal boom system, demolition robot, etc., at the end of an arm. Hydraulic breakers are typically used to demolish or break rock, concrete, brickwork, asphalt, etc. This document does not ...view more

This document sets out the designation, contours and dimensions for rims for narrow- and wide-base off-road tyres primarily intended for earth-moving machinery. All dimensions in this document are given in millimetres and are applicable to the side of the rim which is in contact with the tyre. Tyre designations and dimensions, tyre classifications and nomenclature are given in ISO 4250-1, ISO 10571 and ISO 13442. Annex A gives details on sealing ring grooves and O-rings for earth-mover rims.

This part of EN ISO 19014 specifies general principles for software design, test and signal transmission requirements of safety‐related parts of machine‐control systems (MCS) in earth‐moving machinery and its equipment, as defined in EN ISO 6165.

This document provides for the interchangeability of attachments on skid steer loaders by establishing requirements for the quick coupler system including dimensional limits for the attachment mounting frame. These quick couplers are typically used on skid steer loaders as defined in ISO 6165. NOTE 1 Skid steer loaders can use other styles of quick couplers but the coupler would not be interchangeable with attachments designed to comply with this document. NOTE 2 The requirements of this documen...view more

This document specifies general principles for software development and signal transmission requirements of safety-related parts of machine-control systems (MCS) in earth-moving machinery (EMM) and its equipment, as defined in ISO 6165. In addition, this document addresses the significant hazards as defined in ISO 12100 related to the software embedded within the machine control system. The significant hazards being addressed are the incorrect machine control system output responses from machine...view more

This document specifies requirements and guidelines for the operator's controls on earth-moving machinery as defined in ISO 6165, in as far as those controls relate to any direct-control machine. The recommendations given for finger-, hand- and foot-operated controls are not intended to prevent usage of other types of controls, control locations or control movements. This document is not applicable to devices which are not directly related to machine control. NOTE For remote operator control of ...view more

1.1 This document specifies, in accordance with ISO 10326-1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines.
1.2 This document is applicable to operator seats used on earth-moving machines as defined in
ISO 6165.
1.3 This docu...view more

1.1 This document specifies, in accordance with ISO 10326‑1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines.
1.2 This document is applicable to operator seats used on earth-moving machines as defined in ISO 6165.
1.3 This docum...view more

1.1 This document specifies, in accordance with ISO 10326‑1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines. 1.2 This document is applicable to operator seats used on earth-moving machines as defined in ISO 6165. 1.3 This documen...view more

This document provides a list of standards, referenced in ISO 20474-1 and EN 474-1, that include requirements for information to be included in the operator's manual. This list of standards is being provided as guidance in creating operator's manuals.

This document specifies the communication schema designed to provide mobile machinery status data from a telematics provider's server to customer applications via the Internet. The data is collected from a mobile machine using telematics data-logging equipment and stored on a telematics provider's server. This document describes the communications records used to request data from the server and the responses from the server containing specified data elements to be used in the analysis of machin...view more

This European Standard specifies steering system tests and performance criteria for evaluating the steering capability of rubber-tyred self-propelled earth-moving machines having a machine speed, determined in accordance with ISO 6014:1986, greater than 20 km/h.
It applies to tractors, loaders, backhoe loaders, excavators, dumpers, tractor-scrapers and graders equipped with either manual (unassisted) steering, power-assisted steering of fully powered steering as defined in ISO 6165:2006.
This ...view more

This document specifies steering system tests and performance criteria for evaluating the steering capability of wheeled, ride-on earth-moving machinery as defined in ISO 6165:2012. Wheeled machines include machines equipped with wheels, one or more drums or crawler wheel assemblies.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant to wheeled machines, when used as intended and under conditions of misuse which are reasonably foreseeab...view more

This document specifies steering system tests and performance criteria for evaluating the steering capability of wheeled, ride-on earth-moving machinery as defined in ISO 6165:2012. Wheeled machines include machines equipped with wheels, one or more drums or crawler wheel assemblies. This document deals with the following significant hazards, hazardous situations or hazardous events relevant to wheeled machines, when used as intended and under conditions of misuse which are reasonably foreseeabl...view more

This European Standard specifies the general safety requirements for earth-moving machinery ) described in EN ISO 6165:2006, except rollers and horizontal directional drill.
NOTE 1   Rollers are covered by EN 500.
NOTE 2   Horizontal directional drills are covered by EN 791.
This European Standard also applies to derivative machinery (see 3.1.2) designed primarily for use with equipment to loosen, pick-up, move, transport, distribute and grade earth and rock.
This European Standard gives the com...view more

This document specifies the contents of operator's manuals for earth-moving machinery as defined in ISO 6165, and gives guidance on how to structure such operator's manuals. It is intended to assist manufacturers of the machinery in the drafting and presentation of these manuals. Manuals intended for use by service technicians are not within the scope of this document. NOTE 1 Annex A provides basic information items to be included in the operator's manual. NOTE 2 Annex B provides guidance on the...view more

This European Standard specifies the general safety requirements for earth-moving machinery ) described in EN ISO 6165:2006, except rollers and horizontal directional drill.
NOTE 1   Rollers are covered by EN 500.
NOTE 2   Horizontal directional drills are covered by EN 791.
This European Standard also applies to derivative machinery (see 3.1.2) designed primarily for use with equipment to loosen, pick-up, move, transport, distribute and grade earth and rock.
This European Standard gives the com...view more

This document provides safety requirements for autonomous machines and semi-autonomous machines (ASAM) used in earth-moving and mining operations, and their autonomous or semi-autonomous machine systems (ASAMS). It specifies safety criteria both for the machines and their associated systems and infrastructure, including hardware and software, and provides guidance on safe use in their defined functional environments during the machine and system life cycle. It also defines terms and definitions ...view more

This document gives the safety requirements specific to compact tool carriers. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1. This document deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1...view more