55.060 - Spools. Bobbins

This part of IEC 60286 is applicable to the tape packaging of electronic components without
leads or with lead stumps, intended to be connected to electronic circuits. It includes only
those dimensions that are essential for the taping of components intended for the abovementioned
purposes.
This document also includes requirements related to the packaging of singulated die products
including bare die and bumped die (flip chips).

This part of IEC 60286 applies to the tape packaging of components with axial leads for use in
electronic equipment. In general, the tape is applied to the component leads.
It covers requirements for taping techniques used with equipment for the preforming of leads,
automatic handling, insertion and other operations, and includes only those dimensions which
are essential to the taping of components intended for the above-mentioned purposes.

IEC 60286-1:2017(E) applies to the tape packaging of components with axial leads for use in electronic equipment. In general, the tape is applied to the component leads. It covers requirements for taping techniques used with equipment for the preforming of leads, automatic handling, insertion and other operations, and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes. This edition includes the following significant changes wi...view more

D156/C038 - BT approved the British NC request for modification of an SNC in EN 61242:1997 and invited CCMC to issue the corresponding amendment.

2020-10-02: EC formal rejection from citation LVD 2014/35/EU
2019-09-24 PeC: unflagged for LVD citation after EC feedback
D156/C038 - BT approved the British NC request for modification of an SNC in EN 61242:1997 and invited CCMC to issue the corresponding amendment.

IEC 60695-8-1:2016 provides guidance on the measurement and interpretation of heat release from electrotechnical products and materials from which they are constructed. Heat release data can be used as part of fire hazard assessment and in fire safety engineering, as described in IEC 60695-1-11 and IEC 60695-1-12. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical c...view more

2016-01-12: no BT decision available about extension of DOW = DOR + 60 months
2015-04-17: Extension of DOW = DOR + 60 Months to be requested to CLC/BT.

2016-01-12: no BT decision available about extension of DOW = DOR + 60 months
2015-04-17: Extension of DOW = DOR + 60 Months to be requested to CLC/BT.

Specifies the basic dimensions for cylindrical barrelled delivery spools with conical flanges for winding wires.

This part of IEC 60286 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the abovementioned purposes. This standard also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips).

This part of IEC 60286 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the abovementioned purposes. This standard also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips).

This part of IEC 60264 defines methods of test for delivery spools for winding wires made from thermoplastic materials in order to determine conformity with the established performance requirements for their properties.

Defines methods of test for delivery spools for winding wires made from thermoplastic materials in order to determine conformity with the established performance requirements for their properties.

IEC 60264-3-1:1999+A1:2003 specifies the basic dimensions for taper barrelled delivery spools for winding wires. This consolidated version consists of the second edition (1999) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

IEC 60264-5-1:1997+A1:2003 specifies the basic dimensions for cylindrical barrelled delivery spools with conical flanges for winding wires. This consolidated version consists of the first edition (1997) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

IEC 60264-4-1:1997+A1:2009 defines methods of test for delivery spools for winding wires made from thermoplastic materials in order to determine conformity with the established performance requirements for their properties. This consolidated version consists of the second edition (1997) and its amendment 1 (2009). Therefore, no need to order amendment in addition to this publication.