65.060.01 - Agricultural machines and equipment in general
ICS 65.060.01 Details
Agricultural machines and equipment in general
Landwirtschaftliche Maschinen, Gerate und Ausrustungen imallgemeinen
Machines et matériel a usage agricole en général
Kmetijski stroji in oprema na splošno
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 65.060.01 - Agricultural machines and equipment in general
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the conditions for interchangeability, and the operating characteristics and lays down the technical specifications for tests, for the hydraulic couplings on braking systems for towed agriculture and forestry machinery. This document applies solely to hydraulic brake couplings.
- Standard3 pagesEnglish languagesale 15% off
This document, when used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of towed, semi-mounted, or mounted large rotary mowers with single or multiple cutting elements which have a cutting element tip circle of 1 000 mm or greater for any single cutting-element assembly, mounted on a propelling tractor or machine, intended for agricultural mowing equipment and designed for shredding crop residue, grass and small brush by impact. It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. NOTE 1 When used outside of agriculture, additional requirements not specified in this document can be applicable. This document is not applicable to: — rotary disc mowers, rotary drum mowers, and flail mowers designed for forage crop harvesting as covered by ISO 4254-12; — arm-type large rotary mowers; — pedestrian-controlled motor mowers; — lawn mowers covered by the ISO 5395 series. When requirements of this document are different from those which are stated in ISO 4254-1, the requirements of this document take precedence over the provisions of ISO 4254-1 for machines that have been designed and built according to the provisions of this document. This document is also not applicable to environmental hazards, road safety, electromagnetic compatibility, vibration and hazards related to moving parts for power transmission. It is also not applicable to hazards related to maintenance or repairs to be carried out by professional service personnel. This document, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to large rotary mowers used as intended and under the conditions foreseen by the manufacturer. (A list of significant hazards is provided in Annex A.) NOTE 2 Example illustrations of two mowers (a rigid-deck large rotary mower and a trail-type multi-section, foldable-wing large rotary mower) dealt with in this document are shown in Annex C, C.1. NOTE 3 Example illustrations of mowers not dealt with in this document are shown in Annex C, C.2. NOTE 4 ISO 14982 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile agricultural machinery. This document is not applicable to large rotary mowers which are manufactured before the date of publication.
- Standard32 pagesEnglish languagesale 15% off
- Draft32 pagesEnglish languagesale 15% off
- Draft32 pagesEnglish languagesale 15% off
This document establishes general principles for the design of safety labels and hazard pictorials permanently affixed to, or displayed electronically on, tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. This document outlines safety label objectives, describes the basic safety label formats and colours, provides guidance on developing the various panels that together constitute a safety label, and includes safety label information with regard to operator’s manuals.
- Standard53 pagesEnglish languagesale 15% off
- Standard53 pagesFrench languagesale 15% off
This document describes the implement messages application layer of the network, specifying the message set and defining the messages used for communication with and between tractors and connected implements.
- Standard29 pagesEnglish languagesale 15% off
- Standard33 pagesFrench languagesale 15% off
This document specifies the content and gives guidance on the format of operator’s manuals for tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. It is intended to assist manufacturers of the machinery in the drafting and presentation of these manuals. Manuals intended for use by a service technician are not within the scope of this document.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
2021-11-08 JF:via decision BT C204/2021, taken on 2021-11-03, CEN/BT approved revised Annex ZA of the EN. EN under publication.
2021-02-18 JF: at the meeting held on 2021-02-17 with French Authorities, HAS Consultant and ISO and CEN representatives the LoC assessment at 2nd FV was resolved
2021-02-01 TAN: The ballot is put on hold in ISO. Ballot cancelled in CEN.
2021-01-06 JF: through decision C224/2020, CEN/BT approved the 2nd vote
2020-07-10 JF: CEN and ISO/TCs intend to have a 2nd vote in order to address LoC assessment as the changes are technical. CCMC asked CEN/TC to launch the ballot on 2nd vote.
2020-06-30 JF: CEN/TC Secretariat informed about the need to revise the Annex ZA in order to address the concerns of market surveillance authorites. The Annex ZA is intended to be revised after the publication of ISO standard
- Amendment16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
The message set specified in this document is designed to support the needs of tractors and implements in using the services of a file server (FS). An FS is a distinct control function (CF) on the mobile implement control system that enables all CFs to store or retrieve data from a file-based storage device.
- Standard60 pagesEnglish languagesale 15% off
- Standard64 pagesFrench languagesale 15% off
- Standard64 pagesFrench languagesale 15% off
This document defines terms related to feed processing technology, machines and equipment widely used in feed mills.
- Standard7 pagesEnglish languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
2021-11-08 JF:via decision BT C204/2021, taken on 2021-11-03, CEN/BT approved revised Annex ZA of the EN. EN under publication.
2021-02-18 JF: at the meeting held on 2021-02-17 with French Authorities, HAS Consultant and ISO and CEN representatives the LoC assessment at 2nd FV was resolved
2021-02-01 TAN: The ballot is put on hold in ISO. Ballot cancelled in CEN.
2021-01-06 JF: through decision C224/2020, CEN/BT approved the 2nd vote
2020-07-10 JF: CEN and ISO/TCs intend to have a 2nd vote in order to address LoC assessment as the changes are technical. CCMC asked CEN/TC to launch the ballot on 2nd vote.
2020-06-30 JF: CEN/TC Secretariat informed about the need to revise the Annex ZA in order to address the concerns of market surveillance authorites. The Annex ZA is intended to be revised after the publication of ISO standard
- Amendment16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Draft9 pagesEnglish languagesale 15% off
- Draft9 pagesEnglish languagesale 15% off
- Draft12 pagesEnglish languagesale 15% off
This document specifies the characteristics of the hydraulic pressure from agricultural tractors to connect hydraulic devices on implements, to permit interchangeable use of various types of implements using remote cylinders and other hydraulic devices. It applies to agricultural tractors intended for interchangeable implements.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Draft3 pagesEnglish languagesale 15% off
This document provides terms and definitions for agricultural field equipment designed primarily for use in agricultural operations for the production of food and fibre. This document also applies to agricultural tractors used in forestry applications. Purpose-built forestry machines, as defined by ISO 6814, are not included.
- Standard10 pagesEnglish languagesale 15% off
- Draft10 pagesEnglish languagesale 15% off
This document specifies the access to vehicle on-board diagnostics (OBD) by describing minimum hardware and software requirements including requirements for reprogramming, calibration and configuration after repair works. In addition, it provides hardware and software specifications for diagnostic tools. This document does not apply to retrofit kits as these kits are not an integrated part of the vehicle.
- Standard18 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
- Draft18 pagesEnglish languagesale 15% off
- Draft19 pagesFrench languagesale 15% off
This document specifies safety requirements and their verification for the design and construction of power take-off (PTO) drive shafts and their guards linking a tractor or self-propelled machinery to the first fixed bearing of recipient machinery. It describes methods for the elimination or reduction of risks which need specific requirements including such risks arising from misuse, reasonably foreseeable by the manufacturer. It is applicable only to those PTO drive shafts and guards mechanically linked to the shaft by at least two bearings.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
This document does not deal with:
- the guards totally covering, but not mechanically linked to, the PTO drive shaft;
- the mechanical characteristics of PTO drive shafts, overrun devices and torque limiters;
- general hazards which are dealt with in EN ISO 4254-1:2015 (see introduction).
Environmental aspects have not been considered in this document.
This document is not applicable to PTO drive shafts and their guards which are manufactured before the date of publication of this document by CEN.
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft32 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard9 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Draft9 pagesEnglish languagesale 15% off
- Draft10 pagesFrench languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
- Draft6 pagesEnglish languagesale 15% off
- Draft7 pagesFrench languagesale 15% off
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Draft2 pagesEnglish languagesale 15% off
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Draft3 pagesEnglish languagesale 15% off
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Draft3 pagesEnglish languagesale 15% off
This document applies to wheeled and/or track-laying self-propelled agricultural and forestry vehicles when used on public roads. It specifies the definitions, construction and performance requirements and the means for verification of braking systems on vehicles with a maximum design speed not exceeding 60 km/h.
Following items are excluded from the scope of this document:
- coupling force control;
- endurance braking systems;
- Anti-Lock Braking Systems and EBS;
- vacuum braking systems;
- safety related parts of complex electronic control systems;
- trailer braking control systems.
NOTE For assisted trailer braking the EU Regulation 2015/68 can be used but before including these requirements into this document, an additional review of 2015/68 is needed.
- Standard38 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies criteria for construction, establishes performance test methods and defines acceptance criteria for telescopic mechanical screw- and nut-type drawbar jacks and hydraulic drawbar jacks intended to be fitted on the implement tongue of interchangeable towed machinery [here after referred to as "implement(s)"] as original equipment or as replacement jacks. In addition, it specifies minimum markings and information for use to be provided by the jack manufacturer. These jacks are used specifically for — supporting the hitch points of implements during storage; — lifting and lowering of implement tongues to facilitate attaching to or disconnecting from an agricultural tractor; and — levelling an implement for stationary use.
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document specifies safety requirements, test procedures, and establishes minimum acceptance criteria for the application of telescopic mechanical screw- and nut-type drawbar jacks and hydraulic drawbar jacks intended to be fitted on the implement tongue of interchangeable towed machinery and hereafter referred to as "implement(s)" as original equipment or jacks fitted with a jack attachment mount. This document applies to implement mounted jacks or jacks fitted with a jack attachment mount. These jacks are used specifically for supporting the hitch points of implements during storage, lifting and lowering of implement tongues to facilitate attaching to or disconnecting from an agricultural tractor and levelling of machinery for stationary use. The drawbars are those which are designed to couple with the mechanical connections of towing vehicles.
- Standard6 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies the standardized access to repair and maintenance information (RMI) systems to provide repair and maintenance information for vehicles used in agriculture and forestry. It provides — general information and basic principles, — use case definitions (functional requirements), and — technical requirements as guidelines for manufacturers intending to establish such an information system. Annex A includes procedures to ensure the conformance of such information systems with the requirements specified by this document.
- Standard23 pagesEnglish languagesale 15% off
- Standard25 pagesFrench languagesale 15% off
- Draft23 pagesEnglish languagesale 15% off
This document applies to wheeled and track-laying self-propelled agricultural and forestry vehicles. It specifies the definitions, construction and performance requirements and the means for verification of braking systems on vehicles with a maximum design speed not exceeding 60 km/h.
Following items are excluded from the scope of this standard:
• Coupling force control
• Endurance braking systems
• Anti-Lock Braking Systems and EBS
• Vacuum braking systems
• Safety related parts of complex electronic control systems
• Trailer Braking control systems
- Standard38 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods of operation and requirements related to manual (for example, hand-, finger-, foot-operated) controls as well as controls associated with virtual terminals intended for a seated operator. It applies to controls installed on agricultural tractors and self-propelled agricultural machinery. It also gives recommendations for the control actuating forces and torques, direction of motion and location of these manual controls. This document also specifies the minimum information relevant to manual controls to be provided in the operator's manual, for use as intended by the manufacturer.
- Standard18 pagesEnglish languagesale 15% off
- Standard22 pagesFrench languagesale 15% off
This European Standard specifies safety requirements and their verification for the design and construction of power take-off (PTO) drive shafts and their guards linking self-propelled machinery (or tractor) to the first fixed bearing of recipient machinery, by describing methods for the elimination or reduction of risks which need specific requirements. This standard concerns only the PTO drive shafts and those guards which are mechanically linked to the PTO drive shaft by at least two bearings.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
This standard does not deal with:
- the guards totally covering, but not mechanically linked to the PTO drive shaft. As these devices are not at present widely established on the market, they should be dealt with in a future revision of this standard;
- the mechanical characteristics of PTO drive shafts, overrun devices and torque limiters;
- general hazards.
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft32 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the concept phase of the development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (such as street-sweeping machines). This document is not applicable to: — aircraft and air-cushion vehicles used in agriculture; — lawn and garden equipment. This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications. NOTE 1 Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer. This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards., unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protection measures, safeguards, or safety-related functions in response to non-E/E/PES hazards. Examples included within the scope of this document: — SRP/CS's limiting current flow in electric hybrids to prevent insulation failure/shock hazards; — electromagnetic interference with the SRP/CS; — SRP/CS's designed to prevent fire. Examples not included within the scope of this document: — insulation failure due to friction that leads to electric shock hazards; — nominal electromagnetic radiation impacting nearby machine control systems; — corrosion causing electric cables to overheat. This document is not applicable to non-E/E/PES systems (such as hydraulic, mechanic or pneumatic). NOTE 2 See also ISO 12100 for design principles related to the safety of machinery. This document is not applicable to safety-related parts of control systems manufactured before the date of its publication.
- Standard47 pagesEnglish languagesale 15% off
- Standard50 pagesFrench languagesale 15% off
This document specifies principles for the design of highly automated aspects of highly automated machines and vehicles (e.g. agricultural tractors, tractor implement systems, implements and self-propelled machinery) during agricultural field operations. In addition, it provides guidance on the type of information on safe working practices (including information about residual risks) to be provided by the manufacturer.
The purpose of this document is to assist in the provision of safety requirements, means of verification and information for use to ensure an appropriate level of safety for agricultural and forestry tractors and self-propelled machines with functions allowing highly automated operations (see 3.7).
This document deals with all the significant hazards, hazardous situations and events (as listed in Annex A), relevant to agricultural and forestry tractors and self-propelled machines allowing highly automated field operations when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service.
NOTE 1 While this document gives principles for the design, verification, validation and provision of information for use of a highly automated agricultural machine (HAAM), the detailed specification of requirements for a specific application will be dependent on the machine and its operating conditions. Therefore, the principles for design given in this document need to be extended for specific HAAM by the use of relevant specific (type-C) standards, when available, or by the manufacturer of the machine using risk assessment. Such additional specification of requirements, for design, verification, validation or information for use are outside the scope of this document.
NOTE 2 Safety requirements for specific machines not related to their highly automated operations can be available in machine-specific type-C standards.
This document is not applicable to:
— forestry applications;
— mobile, semi-mobile or stationary machinery used for farm yard or barn operations;
— operations on public roads including relevant requirements for braking and steering systems.
NOTE 3 With respect to implements (e.g. their specific design, functions) and the communication between tractors and implements, additional risks can be relevant and can require additional measures. Such additional measures are outside the scope of this document and are the responsibility of the manufacturer.
This document is not applicable to agricultural and forestry tractors, tractor implement systems, implements and self-propelled machines which are manufactured before the date of its publication.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesGerman languagesale 10% offe-Library read for1 day
This document describes the management of source addresses (SAs) for control functions (CFs) of electronic control units (ECUs), the association of addresses with the functional identification of a device and the detection and reporting of network-related errors. It also specifies procedures for initialization of network-connected ECUs.
- Standard30 pagesEnglish languagesale 15% off
- Standard31 pagesFrench languagesale 15% off
ISO 11783 specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and information-storage and -display units, whether mounted on, or part of, the tractor or implement. ISO 11783 also provides an open interconnect system for on-board electronic systems used by agriculture and forestry equipment. It is intended to enable electronic control units (ECUs) to communicate with each other, providing a standardized system. This document defines and describes the network's 250 kbit/s, twisted, non-shielded, quad-cable physical layer and an alternative cable and architecture named twisted pair physical layer (TPPL) based on a 250 kbit/s, un-shielded, twisted pair cable network layer which is fully backward compatible to twisted quad based machines and devices. NOTE Where not differently specified, requirements are valid for both twisted quad and TPPL.
- Standard66 pagesEnglish languagesale 15% off
- Standard68 pagesFrench languagesale 15% off
ISO 11783, as a whole, specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed, or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage, and display units, whether mounted on, or part of, the tractor or implement. This document describes the network's diagnostic system. NOTE The name and contact information of the Maintenance Agency for this document can be found at http://www.iso.org/mara.
- Standard31 pagesEnglish languagesale 15% off
- Standard34 pagesFrench languagesale 15% off
This part of ISO xxx is applicable to tractors, self-propelled ride-on machines, and mounted / semi-mounted or trailed machines used in agriculture that do not require an onboard operator for primary machine control.
The standard will specify general requirements that relate to the protection and safety of the machine operator, by-standers, and service personnel.
This standard will define requirements that can apply to machine functional safety and the components of highly automated agricultural tractors and machines.
Standards like ISO 10975, ISO 12100 are to be considered.
Excluded:
• New safety symbols required would be directed to TC23/SC14 for consideration.
• ISOBUS technologies are covered by TC23/SC19.
• Wireless communication technologies
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies the main dimensions of endless hexagonal belts intended for use on agricultural machinery (and, in particular, harvester-thresher machines), together with the groove section of the corresponding fixed-diameter pulleys.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This document specifies principles for the design of highly automated aspects of highly automated machines and vehicles (e.g. agricultural tractors, tractor implement systems, implements and self-propelled machinery) during agricultural field operations. In addition, it provides guidance on the type of information on safe working practices (including information about residual risks) to be provided by the manufacturer. The purpose of this document is to assist in the provision of safety requirements, means of verification and information for use to ensure an appropriate level of safety for agricultural and forestry tractors and self-propelled machines with functions allowing highly automated operations (see 3.7). This document deals with all the significant hazards, hazardous situations and events (as listed in Annex A), relevant to agricultural and forestry tractors and self-propelled machines allowing highly automated field operations when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service. NOTE 1 While this document gives principles for the design, verification, validation and provision of information for use of a highly automated agricultural machine (HAAM), the detailed specification of requirements for a specific application will be dependent on the machine and its operating conditions. Therefore, the principles for design given in this document need to be extended for specific HAAM by the use of relevant specific (type-C) standards, when available, or by the manufacturer of the machine using risk assessment. Such additional specification of requirements, for design, verification, validation or information for use are outside the scope of this document. NOTE 2 Safety requirements for specific machines not related to their highly automated operations can be available in machine-specific type-C standards. This document is not applicable to: — forestry applications; — mobile, semi-mobile or stationary machinery used for farm yard or barn operations; — operations on public roads including relevant requirements for braking and steering systems. NOTE 3 With respect to implements (e.g. their specific design, functions) and the communication between tractors and implements, additional risks can be relevant and can require additional measures. Such additional measures are outside the scope of this document and are the responsibility of the manufacturer. This document is not applicable to agricultural and forestry tractors, tractor implement systems, implements and self-propelled machines which are manufactured before the date of its publication.
- Standard18 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
This document specifies the application, the network layer protocols and the mapping to the controller area network (CAN) data link layer protocol as specified in ISO 11898-1. The application layer specifies protocol data units (PDU), which can be mapped to Classical CAN data frames using the Classical Extended Frame Format (CEFF). For PDUs exceeding the length of the CEFF-formatted data frames, this document specifies transport layer protocols and the mapping to CEFF-formatted data frames.
- Standard62 pagesEnglish languagesale 15% off
- Standard65 pagesFrench languagesale 15% off
This document sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (e.g. street-sweeping machines). This document is not applicable to: — aircraft and air-cushion vehicles used in agriculture; — lawn and garden equipment. This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications. NOTE 1 Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer. This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards, unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protective measures, safeguards, or safety-related functions in response to non-E/E/PES hazards. Examples included within the scope of this document: — SRP/CS's limiting current flow in electric hybrids to prevent insulation failure/shock hazards; — electromagnetic interference with the SRP/CS; — SRP/CS's designed to prevent fire. Examples not included in the scope of this document: — insulation failure due to friction that leads to electric shock hazards; — nominal electromagnetic radiation impacting nearby machine control systems; — corrosion causing electric cables to overheat. This document is not applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic). NOTE 2 See also ISO 12100 for design principles related to the safety of machinery. This document is not applicable to safety related parts of control systems manufactured before the date of its publication.
- Standard59 pagesEnglish languagesale 15% off
- Standard62 pagesFrench languagesale 15% off
This document sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (e.g. street-sweeping machines). This document is not applicable to: — aircraft and air-cushion vehicles used in agriculture; — lawn and garden equipment. This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications. NOTE 1 Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer. This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards, unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protective measures, safeguards, or safety-related functions in response to non-E/E/PES hazards. Examples included within the scope of this document: — SRP/CS limiting current flow in electric hybrids to prevent insulation failure/shock hazards; — electromagnetic interference with the SRP/CS; — SRP/CS designed to prevent fire. Examples not included in the scope of this document: — insulation failure due to friction that leads to electric shock hazards; — nominal electromagnetic radiation impacting nearby machine control systems; — corrosion causing electric cables to overheat. This document is not applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic). NOTE 2 See also ISO 12100 for design principles related to the safety of machinery. This document is not applicable to safety related parts of control systems manufactured before the date of its publication.
- Standard23 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
This document sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (e.g. street-sweeping machines). This document is not applicable to: — aircraft and air-cushion vehicles used in agriculture; — lawn and garden equipment. This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications. NOTE 1 Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer. This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards, unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protective measures, safeguards, or safety-related functions in response to non-E/E/PES hazards. Examples included within the scope of this document: — SRP/CS limiting current flow in electric hybrids to prevent insulation failure/shock hazards; — electromagnetic interference with the SRP/CS; — SRP/CS designed to prevent fire. Examples not included in the scope of this document: — insulation failure due to friction that leads to electric shock hazards; — nominal electromagnetic radiation impacting nearby machine control systems; — corrosion causing electric cables to overheat. This document is not applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic). NOTE 2 See also ISO 12100 for design principles related to the safety of machinery. This document is not applicable to safety related parts of control systems manufactured before the date of its publication.
- Standard22 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
This Technical Report gives guidance for the quantification of alteration of biodegradable thermoplastic mulch
films for use in agriculture and horticulture.
It may be used for biodegradable thermoplastic mulch films in conformance with prEN 17033.
- Technical report14 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors, mounted, semi-mounted, towed or self propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators, control elements, information storage and display units whether mounted or part of the tractor, or any implements. This document describes a universal virtual terminal that can be used by both tractors and implements.
- Standard348 pagesEnglish languagesale 15% off
- Standard398 pagesFrench languagesale 15% off
This European Standard specifies the requirements to be fulfilled by manufacturers of tractors, interchangeable towed equipment and trailers used in agriculture and forestry in order to comply with the obligation to provide non-discriminatory access for independent operators to Repair and Maintenance Information (RMI) and to provide information on On-Board Diagnostic (OBD) systems.
This standard specifies all organisational and technical requirements and means of verification to comply with the EU Regulation 167/2013 and its Delegated Acts with the objectives to allow the fair competition between manufacturers and between operators and to improve the competitiveness and future viability of companies with special regard to Small and Medium-sized Enterprises (SME).
This European Standard is applicable to agricultural and forestry vehicles approved (respectively to be approved) in accordance with the EU Regulation 167/2013.
This European Standard is not applicable to small series vehicles.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 11783-1:2017 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and information-storage and -display units, whether mounted on, or part of, the tractor or implement. It is intended to provide open system interconnect (OSI) for electronic systems used by agricultural and forestry equipment. This part of ISO 11783 gives a general overview of ISO 11783. For ISO 11783 application developers, the content of this electronic database provides the current listing of the ISO 11783‑1 address assignments, identity assignments, and parameter definitions which have been assigned and which are officially registered by SAE J1939. This information is found in the online database on the ISOBUS website (http://www.isobus.net/). NOTE The secretariat of the maintenance agency (MA) is provided by VDMA (German Engineering Federation) on behalf of DIN.
- Standard19 pagesEnglish languagesale 15% off
- Standard22 pagesFrench languagesale 15% off
This standard specifies the requirements to be fulfilled by manufacturers of tractors, interchangeable towed equipment and trailers used in agriculture and forestry in order to comply with the obligation to provide non-discriminatory access for independent operators to Repair and Maintenance Information (RMI) and to provide information on On-Board Diagnostic (OBD) systems.
This standard specifies all organisational and technical requirements and means of verification to comply with the EU Regulation 167/2013 and its Delegated Acts with the objectives to allow the fair competition between manufacturers and between operators and to improve the competitiveness and future viability of companies with special regard to Small and Medium sized Enterprises (SME).
This standard is applicable to agricultural and forestry vehicles approved (respectively to be approved) in accordance with the EU Regulation 167/2013.
This standard is not applicable to small series vehicles.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for three types of flexible rubber hose for pressure spraying of
agricultural chemicals and/or fertilizer products within a temperature range of –10 °C to +60 °C.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 4254-14:2016 intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed, and stationary bale wrapper for bales of agricultural harvesting products including wrappers which are combined or integrated with pick-up balers.
It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
NOTE 1 Requirements for self-propelled bale wrappers may be added during the next revision of this part of ISO 4254.
NOTE 2 Examples of these machines are given in Annex A.
NOTE 3 Requirements for pick-up balers are specified in ISO 4254‑11.
When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254‑1, the requirements of this part of ISO 4254 take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the requirements of this part of ISO 4254.
This part of ISO 4254, taken together with ISO 4254‑1, deals with all the significant hazards (as listed in Table 1), hazardous situations, and events relevant to mounted, semi-mounted, and trailed bale wrappers including wrappers which are combined with pick-up balers when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Clause 4).
ISO 4254-14:2016 is not applicable to the following:
- non-mobile fixed bale wrappers;
- tube/inline wrappers;
- wrapping process that concerns only the circumferential part of the bale and that occurs in the bale chamber;
- the integrity of safety related parts of control systems with regard to the specification of performance levels;
- environmental hazards (except noise), road safety, and hazards related to moving parts for power transmission;
- hazards related to maintenance or repairs carried out by professional service personnel.
NOTE 4 Specific requirements related to road traffic regulations are not taken into account in this part of ISO 4254.
ISO 4254-14:2016 is not applicable to machines manufactured before the date of its publication.
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft34 pagesGerman languagesale 10% offe-Library read for1 day
ISO 3767-1:2016 standardizes symbols for use on operator controls and other displays applicable to multiple types of agricultural tractors and machinery, forestry machinery, and powered lawn and garden equipment.
- Standard88 pagesEnglish languagesale 15% off
- Standard88 pagesEnglish languagesale 15% off
- Standard98 pagesFrench languagesale 15% off
ISO 3767-2:2016 standardizes symbols for use on operator controls and other displays on agricultural tractors and machinery.
- Standard59 pagesEnglish languagesale 15% off
- Standard59 pagesEnglish languagesale 15% off
- Standard66 pagesFrench languagesale 15% off
ISO 17989-1:2015 provides guidelines to assist designers and manufacturers of tractors and machinery for agriculture and forestry to integrate sustainability principles, practices and considerations into their organizations and processes. This part of ISO 17989 is specifically applicable to equipment used in the production of food, fibres, fuel and lumber for humans and livestock.
NOTE This part of ISO 17989 includes three different levels for the application: principles, recommendations and additional information (annexes).
ISO 17989-1:2015 is addressed to the organization management and provides guidance for considering sustainability aspects relevant for the organization and the product life cycle. It defines the factory gate as the system boundary (Figure 1).
ISO 17989-1:2015 is not applicable to contractual or regulatory purposes or to registration and certification.
Except when they are closely related to sustainability, this part of ISO 17989 does not address issues of occupational health and safety or operator safety aspects of a machine's design. Designers can find guidance on these issues in other International Standards.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 4254-1:2013 specifies the safety requirements and the means of their verification for the design and construction of self-propelled ride-on machines, mounted, semi-mounted and trailed machines used in agriculture in order to deal with the hazards which are typical for most of the machines. In addition, it specifies the type of information on safe working practices including information about residual risks to be provided by the manufacturer.
This document deals with significant hazards, hazardous situations and events relevant to this agricultural machinery when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service.
ISO 4254-1:2013 is not applicable to
? agricultural or forestry tractors,
? aircraft and air-cushion vehicles used in agriculture,
? lawn and garden equipment,
? machine-specific components or functions (e.g. working tools and/or processes).
ISO 4254-1:2013 is not applicable to hazards related to periodic service, machine conversion and repairs intended to be carried out by professional service personnel, environmental hazards, road safety (e.g. steering, braking), or to the power take-off (PTO) drive shaft; neither is it applicable to guards of moving parts for power transmission except for strength requirements for guards and barriers.
ISO 4254-1:2013 is not applicable to machines which are manufactured before the date of its publication.
Not all of the hazards dealt with by ISO 4254-1:2013 are necessarily present on a particular machine. A risk assessment should be carried out by the manufacturer to determine the hazards that are applicable and any hazards in addition to those dealt with by this part or a relevant machine-specific part. The requirements of a machine-specific part of ISO 4254 take precedence over the requirements of this part.
- Standard50 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft48 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 16230-1:2015 is applicable to tractors and self-propelled ride-on machines, mounted implements, and towed implements used in agriculture and forestry. This part of ISO 16230 specifies general requirements that relate to the protection and safety of operators and bystanders on machines with on-board voltages in the range of 50 V AC to 1000 V AC and 75 V DC to 1500 V DC. This part of ISO 16230 applies to electrical equipment and parts of the electrical equipment on such machines and includes general requirements related to the protection and safety of operators, bystanders, and first responders.
ISO 16230-1:2015 deals with significant hazards, hazardous situations, and events, as listed in Annex A, relevant to this agricultural machinery when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service.
ISO 16230-1:2015 is not applicable to the following:
- specific design elements of external interfaces (e.g. the interface between a tractor and implement);
- externally powered equipment (e.g. line powered equipment, equipment without on-board power generation);
- purpose built forestry machines;
- stationary electrical generators.
ISO 16230-1:2015 is not applicable to machines which are manufactured before the date of its publication.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day