65.060.20 - Soil-working equipment
ICS 65.060.20 Details
Soil-working equipment
Bodenbearbeitungsgerate
Matériel pour le travail du sol
Oprema za obdelovanje tal
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 65.060.20 - Soil-working equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
ISO 4254-5:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil-working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
ISO 4254-5:2018 deals with significant hazards (as listed in Annex A), hazardous situations and events relevant to power-driven soil-working machines used as intended and under the conditions foreseeable by the manufacturer (see Clause 4).
ISO 4254-5:2018 is not applicable to
- spading machines, and
- machines fitted with a retractable device making them capable of working between two successive plants in the same row.
ISO 4254-5:2018 is not applicable to environmental hazards. It is not applicable to hazards related to moving parts for power transmission (except for strength requirements for guards and barriers) or to maintenance or repairs carried out by professional service personnel.
NOTE 1 Specific requirements related to road traffic regulations are not taken into account in this document.
NOTE 2 Vibrations are not regarded as a significant hazard in the case of mounted, semi-mounted or trailed machines.
ISO 4254-5:2018 is not applicable to power-driven soil-working machines which are manufactured before the date of its publication.
When requirements of this document are different from those which are stated in ISO 4254‑1, the requirements of this document take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the provisions of this document.
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft21 pagesEnglish languagesale 10% offe-Library read for1 day
This document, intended to be used together with ISO 4254-1, specifies the safety requirements and
their verification for the design and construction of mounted, semi-mounted and trailed power-driven
soil-working machines used in agriculture. In addition, it specifies the type of information on safe
working practices (including residual risks) to be provided by the manufacturer.
This document deals with significant hazards (as listed in Annex A), hazardous situations and events
relevant to power-driven soil-working machines used as intended and under the conditions foreseeable
by the manufacturer (see Clause 4).
This document is not applicable to
— spading machines, and
— machines fitted with a retractable device making them capable of working between two successive
plants in the same row.
This document is not applicable to environmental hazards. It is not applicable to hazards related to
moving parts for power transmission (except for strength requirements for guards and barriers) or to
maintenance or repairs carried out by professional service personnel.
NOTE 1 Specific requirements related to road traffic regulations are not taken into account in this document.
NOTE 2 Vibrations are not regarded as a significant hazard in the case of mounted, semi-mounted or trailed
machines.
This document is not applicable to power-driven soil-working machines which are manufactured before
the date of its publication.
When requirements of this document are different from those which are stated in ISO 4254-1, the
requirements of this document take precedence over the requirements of ISO 4254-1 for machines that
have been designed and built according to the provisions of this document.
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft21 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 4254-5:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil-working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. ISO 4254-5:2018 deals with significant hazards (as listed in Annex A), hazardous situations and events relevant to power-driven soil-working machines used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). ISO 4254-5:2018 is not applicable to - spading machines, and - machines fitted with a retractable device making them capable of working between two successive plants in the same row. ISO 4254-5:2018 is not applicable to environmental hazards. It is not applicable to hazards related to moving parts for power transmission (except for strength requirements for guards and barriers) or to maintenance or repairs carried out by professional service personnel. NOTE 1 Specific requirements related to road traffic regulations are not taken into account in this document. NOTE 2 Vibrations are not regarded as a significant hazard in the case of mounted, semi-mounted or trailed machines. ISO 4254-5:2018 is not applicable to power-driven soil-working machines which are manufactured before the date of its publication. When requirements of this document are different from those which are stated in ISO 4254‑1, the requirements of this document take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the provisions of this document.
- Standard17 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This European Standard does not cover the requirements to fulfil national road traffic regulations such as lights, steering and braking. Environmental aspects have not been considered in this standard. This European Standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
CEN/TC 144 - Modification to one Figure in 5.7.2.1.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use).
It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
This European Standard does not cover the requirements to fulfil national road traffic regulations such as lights, steering and braking.
Environmental aspects have not been considered in this standard.
This European Standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard44 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This European Standard does not cover the requirements to fulfil national road traffic regulations such as lights, steering and braking. Environmental aspects have not been considered in this standard. This European Standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard44 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies the main dimensions and clearance zones for harrow and cultivator S-tines, type 0 to 3.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard9 pagesFrench languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing of various types of shovels having a working width of up to 400 mm. The following fixing types are specified: type 1 - one hole; - type 2 - two holes; type 3 - two holes, heavy type.
- Standard3 pagesEnglish languagesale 15% off
- Standard5 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesFrench languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
Specifies interchangeability dimensions for agricultural disks of the same type and nominal size, classified as types A, B, and C. Applies to disks as working parts of ploughs, harrows, and disk-tillers. Tabulates concave disks type B, variant 1 and 2, and type C (table 1), type B, variant 3 (table 2), and tolerances for eccentricity and wobble of disk types B and C (table 3). The figures 1 to 4 illustrate profiles and sections.
- Standard7 pagesEnglish languagesale 15% off
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard7 pagesFrench languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
Specifies the main dimensions and clearance zones for harrow and cultivator S-tines, type 0 to 3.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard9 pagesFrench languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
The aim of the test (bending in direction of travel, lateral bending, variation in working depth and in soil penetration angle, permanent deformation, fatigue) is to give reproducible results to compare the quality of S-tines. Applies to S-tines as specified in ISO 5678; the test method can also be used to test other similar products.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
Defines terms in English, French and Russian relating to soil working elments of ploughs and their parts. Applies to mouldboard ploughs. Some figures illustrate share types and various other parts. Alphabetical indexes of terms in English, French, and Russian appear at the end of the document.
- Standard12 pagesEnglish languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
Specifies the dimensions for four types of blades. Applies to blades with two fixing holes. The arrangement and dimensions of the holes shall be as given in figure 1 and, according to the type blade, dimensions and tolerances shall be as given in table 1.
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
- Standard1 pageFrench languagesale 15% off
This second edition cancels and replaces the first edition (1981). Specifies the dimensions of hoe blades with working width up to and including 220 mm. Figure 1 illustrates the contours, dimensions and holes.
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
- Standard1 pageFrench languagesale 15% off
Lays down the main dimensions and specifies the modular arrangement and above-ground disposition of yokes on bearer frames designed for coupling bearer frames an traction links of soil working equipment. Applies to equipment with traction resistance up to 1 2 00 N per metre of the working width. The figure is given to indicate the dimensions of yokes, not to define their design.
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
Specifies interchangeability dimensions for agricultural disks of the same type and nominal size, classified as types A, B, and C. Applies to disks as working parts of ploughs, harrows, and disk-tillers. Tabulates concave disks type B, variant 1 and 2, and type C (table 1), type B, variant 3 (table 2), and tolerances for eccentricity and wobble of disk types B and C (table 3). The figures 1 to 4 illustrate profiles and sections.
- Standard7 pagesEnglish languagesale 15% off
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard7 pagesFrench languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing of various types of shovels having a working width of up to 400 mm. The following fixing types are specified: type 1 - one hole; - type 2 - two holes; type 3 - two holes, heavy type.
- Standard3 pagesEnglish languagesale 15% off
- Standard5 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesFrench languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
N 944 refers
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
N 944 refers
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 4254, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil-working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This part of ISO 4254 deals with significant hazards (as listed in Annex A), hazardous situations and events relevant to power-driven soil-working machines used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This part of ISO 4254 is not applicable to: ? spading machines; ? machines fitted with a retractable device making them capable of working between two successive plants in the same row. This part of ISO 4254 is not applicable to environmental hazards or electromagnetic compatibility. It is not applicable to hazards related to moving parts for power transmission, except for strength requirements for guards and barriers, nor to maintenance or repairs carried out by professional service personnel. This part of ISO 4254 is not applicable to power-driven soil-working machines which are manufactured before the date of its publication. When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254-1, the requirements of this part of ISO 4254 take precedence over the requirements of ISO 4254-1.
- Corrigendum3 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 4254, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil-working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This part of ISO 4254 deals with significant hazards (as listed in Annex A), hazardous situations and events relevant to power-driven soil-working machines used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This part of ISO 4254 is not applicable to: ? spading machines; ? machines fitted with a retractable device making them capable of working between two successive plants in the same row. This part of ISO 4254 is not applicable to environmental hazards or electromagnetic compatibility. It is not applicable to hazards related to moving parts for power transmission, except for strength requirements for guards and barriers, nor to maintenance or repairs carried out by professional service personnel. This part of ISO 4254 is not applicable to power-driven soil-working machines which are manufactured before the date of its publication. When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254-1, the requirements of this part of ISO 4254 take precedence over the requirements of ISO 4254-1.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft24 pagesEnglish languagesale 10% offe-Library read for1 day
TC - Corrections brought to the Foreword of EN ISO 4254-5:2009 as it had been corrected by the former corrigendum EN ISO 4254-5:2009/AC:2010.
- Corrigendum3 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 4254-5:2008, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil‑working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft24 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies the special requirements to be met in design. Applies to equipment of class 03 with a power demand of more than 20 kW. Applies additionally to ISO 4254-1.
- Standard2 pagesEnglish languagesale 15% off
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard2 pagesFrench languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
This amendment to EN 709:1997 gives a test method for measuring the vibration at the handlebars of pedestrian controlled tractors with mounted rotary cultivators, motor hoes and motor hoes with drive wheels.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies safety requirements and their verification for the design and construction of soil working machines, mounted or trailed, with tools powered by the engine of the tractor or by an auxiliary motor. It is applicable regardless of the type of movement of the tools. This standard is not applicable to: - spading machines; - pedestrian controlled soil working machines; - machines where the tools are driven by movement of the machine over the ground; - machines fitted with a retractable device, making them capable of working between two successive plants in the same row. It describes methods for the elimination or reduction of risks which need specific requirements for soil working machines with powered tools. It does not deal with general hazards particularly general hazards related to mobility. These apects will be dealt with in another standard produced by CEN/TC 144 (see introduction). In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with. Note: The measures for safeguarding for the PTO shaft are dealt with in the 'Common requirements' standard being prepared by CEN/TC 144. Environmental aspects have not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use).
It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
This European Standard does not cover the requirements to fulfil national road traffic regulations such as lights, steering and braking.
Environmental aspects have not been considered in this standard.
This European Standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies safety requirements and their verification for the design and construction of soil working machines, mounted or trailed, with tools powered by the engine of the tractor or by an auxiliary motor. It is applicable regardless of the type of movement of the tools. This standard is not applicable to: - spading machines; - pedestrian controlled soil working machines; - machines where the tools are driven by movement of the machine over the ground; - machines fitted with a retractable device, making them capable of working between two successive plants in the same row. It describes methods for the elimination or reduction of risks which need specific requirements for soil working machines with powered tools. It does not deal with general hazards particularly general hazards related to mobility. These apects will be dealt with in another standard produced by CEN/TC 144 (see introduction). In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with. Note: The measures for safeguarding for the PTO shaft are dealt with in the 'Common requirements' standard being prepared by CEN/TC 144. Environmental aspects have not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This European Standard does not cover the requirements to fulfill national road traffic regulations such as lights, steering and braking. Environmental aspects have not been considered in this standard. This European Standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This amendment to EN 709:1997 gives a test method for measuring the vibration at the handlebars of pedestrian controlled tractors with mounted rotary cultivators, motor hoes and motor hoes with drive wheels.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This European Standard does not cover the requirements to fulfill national road traffic regulations such as lights, steering and braking. Environmental aspects have not been considered in this standard. This European Standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This European Standard does not cover the requirements to fulfill national road traffic regulations such as lights, steering and braking. Environmental aspects have not been considered in this standard. This European Standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 4254-5:2008, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil‑working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
- Standard14 pagesEnglish languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
- Standard3 pagesEnglish languagesale 15% off
Specifies the special requirements to be met in design. Applies to equipment of class 03 with a power demand of more than 20 kW. Applies additionally to ISO 4254-1.
- Standard2 pagesEnglish languagesale 15% off
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard2 pagesFrench languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Standard12 pagesEnglish languagesale 15% off
Specifies charactristics of coupling devices and lays down dimensions for the section width of trailed agricultural rollers. Describes the design of front-mounted and rear-mounted coupling halves. An annex show examples of hitching with three or five sections for working or transport.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
Specifies interchangeability dimensions for agricultural disks of the same type and nominal size, classified as types A, B, and C. Applies to disks as working parts of ploughs, harrows, and disk-tillers. The nominal dimensions recommended for disks in the table those given A flat disks. The figure illustrates profile and section.
- Technical report3 pagesEnglish languagesale 15% off
- Technical report3 pagesFrench languagesale 15% off
- Technical report3 pagesFrench languagesale 15% off