This document provides requirements and guidelines for marine geophysical investigations. It is applicable to operators/end users, contractors and public and regulatory authorities concerned with marine site investigations for offshore structures for petroleum and natural gas industries. This document provides requirements, specifications, and guidance for: a) objectives, planning, and quality management; b) positioning; c) seafloor mapping, including instrumentation and acquisition parameters, ...view more

    • sale 15% off
    • Standard
      81 pages
      English language
    • sale 15% off
    • Draft
      79 pages
      English language

This document specifies requirements and recommendations for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units. This document addresses mobile floating units that are monohull (e.g. ship-shaped vessels or barges); column-stabilized, commonly referred to as semi-submersibles; or other hull forms (e.g. cylindrica...view more

    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      25 pages
      French language
    • sale 15% off
    • Draft
      22 pages
      English language
    • sale 15% off
    • Draft
      24 pages
      French language

This document describes general principles and gives requirements and recommendations for the
selection and qualification of metallic materials for service in equipment used in oil and gas production
and in natural-gas sweetening plants in H2S-containing environments, where the failure of such
equipment can pose a risk to the health and safety of the public and personnel or to the environment.
It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements,...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This document gives requirements and recommendations for the selection and qualification of CRAs
(corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas
production and natural gas treatment plants in H2S-containing environments whose failure can pose
a risk to the health and safety of the public and personnel or to the environment. It can be applied to
help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, ...
view more

    • sale 10% off
    • Standard
      80 pages
      English language
    • e-Library read for
      1 day

This document gives requirements and recommendations for the selection and qualification of carbon
and low-alloy steels for service in equipment used in oil and natural gas production and natural gas
treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety
of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion
damage to the equipment itself. It supplements, but does not replace, the materials requi...
view more

    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and provides recommendations applicable to the following types
of fixed steel offshore structures for the petroleum and natural gas industries:
— caissons, free-standing and braced;
— jackets;
— monotowers;
— towers.
In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups,
other bottom founded structures and other structures related to offshore structures (such as underwater
oil storage tanks, bridges a...
view more

    • sale 10% off
    • Standard
      585 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: ? caissons, free-standing and braced; ? jackets; ? monotowers; ? towers. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (such as underwater oil storage tanks, bridges and conne...view more

    • sale 15% off
    • Standard
      565 pages
      English language
    • sale 15% off
    • Draft
      565 pages
      English language

This European Standard specifies general safety requirements for the design, testing and production of manually operated elevators. The requirements are applicable for on- and off-shore applications of such elevators in the petroleum and petrochemical industries, and are in accordance with EU legislation.
This European Standard does not cover any other type of elevator. It is not applicable to the following types of products:
-   lifting nubbins;
-   lifting plugs;
-   lifting subs;
-   internal gr...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      7 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless
tubular products for casing, tubing, coupling stock and accessory material (including coupling stock
and accessory material from bar) for two product specification levels:
— PSL-1, which is the basis of this document;
— PSL-2, which provides additional requirements for a product that is intended to be both corrosion
and cracking resistant for the environments and qualification method specified i...
view more

    • sale 10% off
    • Standard
      136 pages
      English language
    • e-Library read for
      1 day

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels: — PSL-1, which is the basis of this document; — PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Ann...view more

    • sale 15% off
    • Standard
      125 pages
      English language

This document specifies general safety requirements for the design, testing and production of powered elevators. The requirements are applicable for on- and off-shore applications of such elevators in the petroleum, petrochemical and natural gas industries.
This document does not cover any other type of elevator. It is not applicable to the following types of products: lifting nubbins, lifting plugs, lifting subs, internal gripping devices, equipment for lifting tubular from and onto a vessel. ...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material. By agreement between the purchaser and manufacturer, this document can also be applied to other plain-end pipe sizes and wall thicknesses. This document is applicable to the following connections: — short round thread casing (SC); — long round thread casing (LC); — buttress thread casing (BC); — non-upset tubing (NU); — external upse...view more

    • sale 15% off
    • Standard
      267 pages
      English language

This document specifies general safety requirements for the design, testing and production of powered elevators. The requirements are applicable for onshore and offshore applications of such elevators in the petroleum and petrochemical industries.
This document does not cover any other type of elevator. It is not applicable to the following types of products:
— remote control devices;
— lifting nubbins;
— lifting plugs;
— lifting subs;
— internal gripping devices;
— equipment for lifting ...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies general safety requirements for the design, testing and production of powered elevators. The requirements are applicable for onshore and offshore applications of such elevators in the petroleum and petrochemical industries. This document does not cover any other type of elevator. It is not applicable to the following types of products: — remote control devices; — lifting nubbins; — lifting plugs; — lifting subs; — internal gripping devices; — equipment for lifting tubular...view more

    • sale 15% off
    • Standard
      25 pages
      English language

ISO 19905-3 specifies requirements and gives guidance for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units.
ISO 19905-3 addresses mobile floating units that are monohull (e.g. ship-shaped vessels or barges); column-stabilized, commonly referred to as semi-submersibles; or other hull forms (e.g. cylindrical/co...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

ISO 18647:2017 gives requirements for the design, fabrication, installation, commissioning and integrity management of modular drilling rigs on offshore fixed platforms.
The modular drilling rig includes some or all of the equipment as follows:
- drilling equipment including a derrick/mast and its controls that can be moved by skidding a drilling support structure;
- drilling support equipment which includes support facilities such as power supply/distribution system;
- mud and cement storag...
view more

    • sale 10% off
    • Standard
      123 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and provides recommendations applicable to fixed, floating and grounded concrete offshore structures for the petroleum and natural gas industries and for structures supporting nationally-important power generation, transmission or distribution facility. This document specifically addresses - the design, construction, transportation and installation of new structures, including requirements for in-service inspection and possible removal of structures, - the as...view more

    • sale 10% off
    • Standard
      127 pages
      English language
    • e-Library read for
      1 day

This document provides procedures for testing well cements and cement blends for use in the petroleum and natural gas industries in a deepwater environment, or areas with a low seafloor temperature, or areas where low well temperatures exist. This document supplements API RP 10B-3, 2nd edition (2016), the requirements of which are applicable with the exceptions specified in this document. This document excludes the mitigation of shallow water flow in deepwater wells.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

ISO 19905-3 specifies requirements and gives guidance for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units.
ISO 19905-3 addresses mobile floating units that are monohull (e.g. ship-shaped vessels or barges); column-stabilized, commonly referred to as semi-submersibles; or other hull forms (e.g. cylindrical/co...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

ISO 18647:2017 gives requirements for the design, fabrication, installation, commissioning and integrity management of modular drilling rigs on offshore fixed platforms.
The modular drilling rig includes some or all of the equipment as follows:
- drilling equipment including a derrick/mast and its controls that can be moved by skidding a drilling support structure;
- drilling support equipment which includes support facilities such as power supply/distribution system;
- mud and cement storag...
view more

    • sale 10% off
    • Standard
      123 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and provides recommendations applicable to fixed, floating and grounded concrete offshore structures for the petroleum and natural gas industries and for structures supporting nationally-important power generation, transmission or distribution facility. This document specifically addresses
— the design, construction, transportation and installation of new structures, including requirements for in-service inspection and possible removal of structures,
— the ...
view more

    • sale 10% off
    • Standard
      127 pages
      English language
    • e-Library read for
      1 day

This part of ISO 19901 specifies the SIM process engineering requirements and recommendations to be used by an owner for demonstrating the structural fitness-for-service of existing platforms operating offshore. This part of ISO 19901 addresses the platform life-cycle from concept through to decommissioning and/or possible reuse at a different location and is applicable to:
 substructure structural components on compliant bottom founded structures, including fixed platforms, compliant towers, ...
view more

    • sale 10% off
    • Standard
      153 pages
      English language
    • e-Library read for
      1 day

This document specifies tests to perform in order to determine the galling tendency, sealing performance and structural integrity of casing and tubing connections. “Casing” and “tubing” apply to the service application and not to the diameter of the pipe. This document covers the testing of connections for the most commonly encountered well conditions. Not all possible service scenarios are included. For example, the presence of a corrosive fluid, which can influence the service performance of a...view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and decommissioning of offshore structures related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, icing conditio...view more

    • sale 10% off
    • Standard
      561 pages
      English language
    • e-Library read for
      1 day

This document specifies principles for the structural integrity management (SIM) of offshore structures subjected to known or foreseeable types of actions.
This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries:
— caissons, free-standing and braced;
— jackets;
— monotowers;
— towers.
This document is applicable to topsides, including but not limited to the main decks...
view more

    • sale 10% off
    • Standard
      153 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and decommissioning of offshore structures related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, icing conditio...view more

    • sale 10% off
    • Standard
      561 pages
      English language
    • e-Library read for
      1 day

This document specifies tests to perform in order to determine the galling tendency, sealing performance and structural integrity of casing and tubing connections. "Casing" and "tubing" apply to the service application and not to the diameter of the pipe.
This document covers the testing of connections for the most commonly encountered well conditions. Not all possible service scenarios are included. For example, the presence of a corrosive fluid, which can influence the service performance of ...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements and recommendations for the design and assessment of
bottom-founded (fixed) and buoyant (floating) offshore structures.
This document is applicable for all phases of the life of the structure, including:
— successive stages of construction (i.e. fabrication, transportation, and installation),
— service in-place, both during design life and during any life extensions, and
— decommissioning, and removal.
This document contains general requirements...
view more

    • sale 10% off
    • Standard
      74 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and provides recommendations applicable to fixed, floating and grounded concrete offshore structures for the petroleum and natural gas industries and for structures supporting nationally-important power generation, transmission or distribution facility. This document specifically addresses — the design, construction, transportation and installation of new structures, including requirements for in-service inspection and possible removal of structures, — the as...view more

    • sale 15% off
    • Standard
      115 pages
      English language
    • sale 15% off
    • Standard
      128 pages
      French language
    • sale 15% off
    • Standard
      128 pages
      French language

This document provides objectives, functional requirements and guidelines for techniques for the
analysis and design of surface process safety systems for offshore installations used for the recovery of
hydrocarbon resources.
It also provides recommendations and requirements on support systems which complement the process
safety systems in reducing risk.
NOTE These are not intended to be exhaustive.
The scope of this document is limited to specifying the methods by which the asset is prote...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

This document specifies principles for the structural integrity management (SIM) of offshore structures subjected to known or foreseeable types of actions. This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: — caissons, free-standing and braced; — jackets; — monotowers; — towers. This document is applicable to topsides, including but not limited to the main decks, deck...view more

    • sale 15% off
    • Standard
      143 pages
      English language
    • sale 15% off
    • Standard
      158 pages
      French language

This document specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and decommissioning of offshore structures related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, icing conditio...view more

    • sale 15% off
    • Standard
      546 pages
      English language

This document specifies tests to perform in order to determine the galling tendency, sealing performance and structural integrity of casing and tubing connections. "Casing" and "tubing" apply to the service application and not to the diameter of the pipe. This document covers the testing of connections for the most commonly encountered well conditions. Not all possible service scenarios are included. For example, the presence of a corrosive fluid, which can influence the service performance of a...view more

    • sale 15% off
    • Standard
      4 pages
      English language

This document specifies general requirements and recommendations for the design and assessment of bottom-founded (fixed) and buoyant (floating) offshore structures.
This document is applicable for all phases of the life of the structure, including:
— successive stages of construction (i.e. fabrication, transportation, and installation),
— service in-place, both during design life and during any life extensions, and
— decommissioning, and removal.
This document contains general requirements ...
view more

    • sale 10% off
    • Standard
      74 pages
      English language
    • e-Library read for
      1 day

This document provides requirements and guidance for the structural design and/or assessment of
floating offshore platforms used by the petroleum and natural gas industries to support the following
functions:
— production;
— storage and/or offloading;
— drilling and production;
— production, storage and offloading;
— drilling, production, storage and offloading.
NOTE 1 Floating offshore platforms are often referred to using a variety of abbreviations, e.g. FPS, FSU, FPSO
(see Clauses 3 ...
view more

    • sale 10% off
    • Standard
      214 pages
      English language
    • e-Library read for
      1 day

This document provides objectives, functional requirements and guidelines for techniques for the analysis and design of surface process safety systems for offshore installations used for the recovery of hydrocarbon resources.
It also provides recommendations and requirements on support systems which complement the process safety systems in reducing risk.
NOTE These are not intended to be exhaustive.
The scope of this document is limited to specifying the methods by which the asset is protecte...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements and recommendations for the design and assessment of bottom-founded (fixed) and buoyant (floating) offshore structures. This document is applicable for all phases of the life of the structure, including: — successive stages of construction (i.e. fabrication, transportation, and installation), — service in-place, both during design life and during any life extensions, and — decommissioning, and removal. This document contains general requirements and r...view more

    • sale 15% off
    • Standard
      64 pages
      English language
    • sale 15% off
    • Standard
      70 pages
      French language

This document provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions:
— production;
— storage and/or offloading;
— drilling and production;
— production, storage and offloading;
— drilling, production, storage and offloading.
NOTE 1 Floating offshore platforms are often referred to using a variety of abbreviations, e.g. FPS, FSU, FPSO (see Clauses 3 and...
view more

    • sale 10% off
    • Standard
      214 pages
      English language
    • e-Library read for
      1 day

This part of EN 10225 specifies requirements for weldable structural steels to be used in the fabrication of fixed offshore structures in the form of sections (e.g. H-, I-, Z-sections, U-channels, angles and tees) excluding hollow sections. The thickness limitation in this standard is up to and including 63 mm.
For steel qualities with mechanical properties in the transverse direction (named xL2O) sections with flange widths smaller than 180 mm and channels with flange smaller widths than 90 mm...
view more

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This part of EN 10225 specifies requirements for weldable structural steels made of hot finished seamless and high frequency welded hollow sections to be used in the fabrication of fixed offshore structures.
Following thickness limitations are given in this standard:
-   for seamless hollow sections up to and including 65 mm;
-   for HFW hollow sections up to and including 25,4 mm.
Greater thicknesses may be agreed, provided the technical requirements of this European Standard are maintained.
T...
view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day

This part of EN 10225 specifies requirements for weldable structural steels to be used in the fabrication of fixed offshore structures in the form of plates.
Following thickness limitations are given in this standard:
-   S355NL1O up to and including 200 mm;
-   S355ML1O, S420ML1O, S460ML1O, S500ML1O up to and including 120 mm;
-   S420QLO, S460QLO, S500QLO, S550QLO, S620QLO, S690QLO up to and including 150 mm.
Greater thicknesses may be agreed, provided the technical requirements of this Europea...
view more

    • sale 10% off
    • Standard
      62 pages
      English language
    • e-Library read for
      1 day

This part of EN 10225 specifies requirements for submerged arc welded (SAW) and high frequency welded (HFW) cold formed hollow sections to be used in the fabrication of fixed offshore structures.
The thickness limit for SAWL round hollow sections is up to and including 50,8 mm, for HFW round hollow sections up to and including 25,4 mm and for HFW rectangular hollow sections up to and including 12,5 mm.
Greater thicknesses for SAWL hollow sections may be agreed provided the technical requiremen...
view more

    • sale 10% off
    • Standard
      69 pages
      English language
    • e-Library read for
      1 day

This document provides objectives, functional requirements and guidelines for techniques for the analysis and design of surface process safety systems for offshore installations used for the recovery of hydrocarbon resources. It also provides recommendations and requirements on support systems which complement the process safety systems in reducing risk. NOTE These are not intended to be exhaustive. The scope of this document is limited to specifying the methods by which the asset is protected a...view more

    • sale 15% off
    • Standard
      17 pages
      English language

This document provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: — production; — storage and/or offloading; — drilling and production; — production, storage and offloading; — drilling, production, storage and offloading. NOTE 1 Floating offshore platforms are often referred to using a variety of abbreviations, e.g. FPS, FSU, FPSO (see Clauses 3 and 4), i...view more

    • sale 15% off
    • Standard
      200 pages
      English language

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body
ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas
industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1
form the basis of this document. The requirements that define different levels of standard technical
requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following gr...
view more

    • sale 10% off
    • Standard
      120 pages
      English language
    • e-Library read for
      1 day

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this document. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following grades...
view more

    • sale 10% off
    • Standard
      120 pages
      English language
    • e-Library read for
      1 day

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this document. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G. This document covers the following grades ...view more

    • sale 15% off
    • Standard
      108 pages
      English language

This document specifies requirements for the design, manufacture and marking of offshore containers
with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between
offshore installations and ships.
This document specifies only transport-related requirements.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day