This document defines terms relating to the evaluation of coating materials in research, development and production with regard to their suitability and safety for industrial processes and error analysis. This document also specifies methods for the preparation of test panels and the subsequent measurement of film thickness, colour, surface texture and other measurable surface properties.

    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      22 pages
      French language
    • sale 15% off
    • Draft
      22 pages
      English language
    • sale 15% off
    • Draft
      22 pages
      French language

This document specifies a method for the gas-chromatographic determination of the qualitative and quantitative composition of solvents contained in a product. The method is applicable to coating materials containing solely organic solvents (generally called conventional coating materials) and binder solutions and non-aqueous dispersions containing solely organic solvents. The method defined in this document is not applicable for determination of volatile organic compounds (VOC) and semi-volatile...view more

    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Draft
      13 pages
      English language

This document specifies a test procedure for assessing the scratch resistance of organic paint
coatings, in particular paint coatings used in the automotive industry (i.e. for assessing their carwash
resistance). Machine-based washing is simulated in the laboratory environment using a rotating
brush and synthetic dirt. The test conditions have been designed to be as close as possible to the real
conditions in a car-wash. If the test parameters are suitably chosen, the method can also be used...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for determining the deposition behaviour of an electro-deposition coating (e-coat) on various substrates and with various pre-treatments. It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Draft
      5 pages
      English language

This document specifies a method for determining the re-solving effect of electro-deposition coatings. It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Draft
      6 pages
      English language

This document specifies requirements and methods of test for liquid epoxy paints and internal coatings of such paints in steel pipes and fittings for the conveyance of non-corrosive gas. It also deals with the application of the paint. Other paints or paint systems are not excluded provided they comply with the requirements given in this document. The coating consists of one layer, which is normally shop-applied on blast-cleaned steel by airless spray or other suitable spraying techniques. The a...view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for a two-components flexible polyurethane topcoat to be applied over EN 4687 and/or EN 4688 primers mainly for exterior aerospace applications.
The primer and the finish tested to this document will be from the same manufacturer applied in accordance with (i.a.w.) their instructions/Table 1.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document defines the requirements for a two-components, high corrosion inhibiting epoxy primer.
The coating shall be suitable for use on suitably prepared metallic substrates, chromic acid anodised, or conversion coated aluminium alloys and other suitably prepared substrates.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies methods for exposing coatings to fluorescent UV lamps, heat and water in
apparatus designed to reproduce the weathering effects that occur when materials are exposed in
actual end-use environments to daylight, or to daylight through window glass.
The coatings are exposed to different types of fluorescent UV lamps under controlled environmental
conditions (temperature, humidity and/or water). Different types of fluorescent UV lamp can be used to
meet all the requireme...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This document specifies three methods for testing the peel adhesion, peel strength and tensile lap-shear strength in order to evaluate the adhesive bond as well as the type, location and structure of failures of elastic adhesives on coatings. These methods are used, for example, for testing the assembly with respect to the bond of panes or built-on parts, such as plastic covers, spoilers, instrument panel covers, headlights, with coatings for automobile construction. The two methods of climatic ...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for the gas-chromatographic determination of the solvents in water-thinnable paints and varnishes, binder solutions, emulsions and dispersions.
With the precision stated in Clause 13, single components above 0,02 % (mass fraction) can be determined quantitatively.
The method defined in this document is not applicable for the determination of Volatile Organic Compounds (VOC) and Semi-Volatile Organic Compounds (SVOC) content.
NOTE For the determination of VOC a...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies an instrumental method for determining the image clarity on paint films (coatings) by measuring reflection from the specimen surface or transmission through the specimen.
The method can be applied only to a flat surface.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for the determination of the water content of water-borne coating materials and their raw materials by using a gas chromatograph. The preferred working range of this test method is from a water mass fraction of 15 % to a water mass fraction of 90 % but the method can be applied outside of this range.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies a method to determine the solar reflectance of coating systems using a spectrophotometer with a wide spectral range (300 nm to 2 500 nm) and global solar radiation.
This document is applicable to coating systems.

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for determining the resistance of a coating to rubbing by means of a loaded abrasive material which is linearly moved over the surface to be tested.
The method can also be applied to different material surfaces, such as plastics and metals.

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for determining the settling of coating materials. It is used to determine short-time settling, e.g. during transport or in an electro-deposition bath.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies a test method for the determination of non-volatile matter of coatings directly after application or after intermediate or final drying. In practice, the determination of volatile matter is applied particularly in regard to water-thinnable coatings which are re-coated with an additional coating material.
Furthermore, the method can be used to compare the efficiency of different application and drying methods.
The content of non-volatile or volatile matter of a product a...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for determining the resistance of a coating to scratches introduced by a usually hand-held loaded stylus.
The test can be carried out using a point stylus (method A) or using a disc stylus (method B).
Both methods are generally applicable and can be used in the field as well as on curved surfaces. Method A can also be applied on small test specimens (minimum dimensions 30 mm × 50 mm).
The test can be carried out as a "pass/fail" test (test requirement I) or as...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This document defines the requirements for a two-components, chromate and lead-free primer.
The coating shall be suitable for use on fibre reinforced composite materials, titanium and corrosion resistant steels and other suitably prepared corrosion resistant substrates.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies methods for exposing coatings to fluorescent UV lamps, heat and water in apparatus designed to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass. The coatings are exposed to different types of fluorescent UV lamps under controlled environmental conditions (temperature, humidity and/or water). Different types of fluorescent UV lamp can be used to meet all the requirements f...view more

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      16 pages
      French language
    • sale 15% off
    • Draft
      16 pages
      English language
    • sale 15% off
    • Draft
      16 pages
      French language

This document specifies a method for identifying entry marks, which can occur during electro-deposition coating. Entry marks can often occur in the form of streaks when the workpiece, either set as cathode or anode, is immersed in the electro-deposition tank under applied electric potential (relation of voltage and current). These marks occur parallel to the bath surface on the objects to be coated.
It is applicable to electro-deposition coatings for automotive industries and other general indu...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies two methods for the determination of the throwing power of electro-deposition coating materials.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This document specifies three different methods of electro-deposition coating material contamination with liquid, paste-like and solid foreign materials.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

The document specifies a method for the determination of the compatibility of electro-deposition coating materials with a reference oil.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document defines terms for electro-deposition coatings.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for the determination of soiling material, e.g. from previous processes, non-dispersed paint particles and other foreign material in the electro-deposition coating material.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
In practice, increased sieve residue can have different causes, such as metal particles, which are i...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document summarises the common methods for evaluating the adhesive strength of coatings on a substrate, which can be another coating beneath or the substrate itself. The test methods and evaluation methods are described in Clauses 4, 5, and 6. In the case of standardized test methods the respective standard is referenced in regard to procedure and evaluation. Annex A compares the methods in the synoptic Tables A.1, A.2, and A.3.
Often the adhesive strength cannot be sufficiently evaluated ...
view more

    • sale 10% off
    • Technical report
      87 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      84 pages
      English language
    • e-Library read for
      1 day

This document provides an overview for selecting the most suitable test method regarding the evaluation of the hardness and the wear resistance of coatings.
Annex A gives a summarized list of test methods for the evaluation of the hardness and of the wear resistance of coatings for different stresses.
Methods for testing cross-linking (wear test in connection with solvents) and abrasion tests with multiple impacts are not covered by this document.

    • sale 10% off
    • Technical report
      79 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      76 pages
      English language
    • e-Library read for
      1 day

This document specifies the conditions to take into consideration when selecting the type of natural
weathering and the natural weathering procedure to determine the resistance of coatings or coating
systems (direct weathering or weathering behind window glass).
Natural weathering is used to determine the resistance of coatings or coating systems (denoted in this
document by coatings) to the sun's radiation and the atmosphere.
This document does not take into account special atmospheric inf...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies procedures for the sampling of paints and varnishes, including coating
powders, and raw materials used in their manufacture. Such products include liquids and materials
which, without undergoing chemical modification, are capable of being liquefied when heated up, and
powdered, granulated and pasty materials. Samples can be taken from containers, for example cans,
drums, tanks, tank wagons or ships' tanks, as well as from barrels, sacks, big-bags, silos or silo wagons...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies a test method for assessing the resistance of paint coatings and varnishes
(including wood stains) to separation from substrates when a right-angle lattice pattern is cut into
the coating, penetrating through to the substrate. The property determined by this empirical test
procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or
the substrate. This procedure is not, however, a means of measuring adhesion.
NOTE 1 Where a m...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies the conditions to take into consideration when selecting the type of natural weathering and the natural weathering procedure to determine the resistance of coatings or coating systems (direct weathering or weathering behind window glass). Natural weathering is used to determine the resistance of coatings or coating systems (denoted in this document by coatings) to the sun's radiation and the atmosphere. This document does not take into account special atmospheric influenc...view more

    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Draft
      13 pages
      English language

This document specifies a test method for assessing the resistance of paint coatings and varnishes (including wood stains) to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property determined by this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or the substrate. This procedure is not, however, a means of measuring adhesion. NOTE 1 Where a measur...view more

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Draft
      14 pages
      English language

This document specifies a method for determining the fineness of grind of paints, inks and related
products by use of a suitable gauge, graduated in micrometres.
It is applicable to all types of liquid paints and related products, except products containing pigments in
flake form (e.g. glass flakes, micaceous iron oxides, zinc flakes).

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document is applicable for the determination of VOC and SVOC with an expected VOC and/or SVOC content greater than 0,01 % by mass up to 100 % by mass.
The method given in ISO 11890-1 is used when the VOC is greater than 15 % by mass. This document (method ISO 11890-2) applies when the system contains VOC and SVOC as the VOC result of ISO 11890-1 can be influenced by the SVOC. For VOC content smaller than 0,1 %, the head space method described in ISO 17895 is used as an alternative. ISO 118...
view more

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for determining the fineness of grind of paints, inks and related products by use of a suitable gauge, graduated in micrometres. It is applicable to all types of liquid paints and related products, except products containing pigments in flake form (e.g. glass flakes, micaceous iron oxides, zinc flakes).

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      7 pages
      French language
    • sale 15% off
    • Draft
      6 pages
      English language

This document is applicable for the determination of VOC and SVOC with an expected VOC and/or SVOC content greater than 0,01 % by mass up to 100 % by mass. The method given in ISO 11890-1 is used when the VOC is greater than 15 % by mass. This document (method ISO 11890-2) applies when the system contains VOC and SVOC as the VOC result of ISO 11890-1 can be influenced by the SVOC. For VOC content smaller than 0,1 %, the head space method described in ISO 17895 is used as an alternative. ISO 1189...view more

    • sale 15% off
    • Standard
      39 pages
      English language
    • sale 15% off
    • Standard
      39 pages
      English language
    • sale 15% off
    • Standard
      41 pages
      French language

This document provides a laboratory test method to determine the skin-friction of antifouling paints coated on drums. The results of the laboratory-tested friction of painted drums over a certain period of time can be used for screening of antifouling paints and characterizing changes in friction for different antifouling paints, amongst other applications and other purposes depending on the user's need. This document is applicable to both biocidal-based and biocide-free antifouling paints.

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Draft
      11 pages
      English language

This document specifies a method for determining the electric charge density of an electro-deposition coating (e‑coat) for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      English language

This document specifies procedures for the sampling of paints and varnishes, including coating powders, and raw materials used in their manufacture. Such products include liquids and materials which, without undergoing chemical modification, are capable of being liquefied when heated up, and powdered, granulated and pasty materials. Samples can be taken from containers, for example cans, drums, tanks, tank wagons or ships' tanks, as well as from barrels, sacks, big-bags, silos or silo wagons or ...view more

    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      14 pages
      French language

This standard specifies a test method for assessing the discoloration of coating systems on wood due to wood extractives from knots. The discoloration is measured by colorimetry and the result is stated as the colour difference between the coated surface on the knot and the coated surface beside the knot.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies a test method for assessing microfoam in coating films on stable wood components. Samples are taken from finished wood components that are produced in a production plant, by craftsmen or a laboratory.

    • sale 10% off
    • Standard
      5 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for determining the volatile-matter content of electro-deposition coatings (e-coats) during stoving (stoving loss) used for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 15% off
    • Standard
      7 pages
      English language

1 Scope This document specifies a method for determining the wet-film resistivity of an electro-deposition coating (e‑coat) for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 15% off
    • Standard
      11 pages
      English language

This document specifies a method for assessing the sedimentation of electro-deposition coating materials on horizontal surfaces used for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 15% off
    • Standard
      6 pages
      English language

This document specifies a test procedure for assessing the scratch resistance of organic paint coatings, in particular paint coatings used in the automotive industry (i.e. for assessing their car-wash resistance). Machine-based washing is simulated in the laboratory environment using a rotating brush and synthetic dirt. The test conditions have been designed to be as close as possible to the real conditions in a car-wash. If the test parameters are suitably chosen, the method can also be used fo...view more

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      9 pages
      French language

This document specifies a method for assessing the bath stability of electro-deposition coatings used for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

    • sale 15% off
    • Standard
      3 pages
      English language

EN-ISO 15091 specifies a method for determining the electrical conductivity and the electrical resistance of coating materials. The conductivity is usually measured for water-borne paints and varnishes, including electrodeposition coating materials, and the resistance is usually measured for solvent-borne paints and varnishes. If required, the resistivity of the coating material is calculated from either of these measurements. The method is applicable to products having a conductivity less than ...view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

ISO 19403-7:2017 specifies a method for the dynamic measurement of the roll-off angle of a liquid drop on a solid surface. From the dynamic measurement, the advancing and receding angles of the drop rolling off can also be determined. The roll-off angle plays a role when evaluating, for example, easy-to-clean or anti-adherent surfaces.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day