91 - CONSTRUCTION MATERIALS AND BUILDING

This European Standard specifies a method for determining the fire resistance of horizontal service ducts and vertical service shafts, which pass through walls or floors and enclose pipes and cables. The test examines the behaviour of ducts and shafts exposed to fire from outside and from inside the duct. This European Standard is intended to be read in conjunction with EN 1363-1.
This European Standard does not examine the risk of fire spread as a result of thermal conduction along the piping ...view more

This document gives requirements and guidance for the assessment of conformity of formulations, products and assemblies in accordance with EN 1329 1 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of third-party certification procedures.
NOTE 1   The quality management system is expected to conform to or is no less stringent than the relevant requirements to EN ISO 9001 [1].
NOTE 2   If third party certification is invol...view more

This draft European Standard specifies product characteristics for thermoplastics rigid protective wallcovering panels whose purposes are decorative and protective, but non-structural.
The products covered by this draft European Standard are intended to be used as finishes for hanging onto internal walls and wall partitions by means of adhesive.
For the specified characteristics of these products, this draft European Standard provides for each of it corresponding: requirement(s), assessment me...view more

The Standard is to specify the safety requirements applicable to truck mixers. A truck mixer as defined by this standard is used for the transportation and mixing of concrete, mortars and mineral building materials. The safety requirements will cover the superstructure (mixer equipment) and its interface with the truck chassis but not cover the truck itself and the elements required for the basic transport function of the truck. Other machinery that can be combined with the truck mixer, such as ...view more

This document specifies operational activities, overall alarming, fault detection and diagnostics, reporting, monitoring, energy management functions, functional interlocks and optimizations to set and maintain energy performance of buildings.

This document contains information to support the correct understanding, use and adoption of ISO 52127-1.

This document specifies a method for sampling fabric filter medium from a filter system in operation, and a test method for evaluating the degradation of the sampled filter medium. It applies to both woven and nonwoven fabric filter media. This document specifies a method for removing used filter medium from a dry type filtering dust collector, a method for removing dust from the sampled filter medium as part of preparation for testing, and measurement parameters for the test specimen. The numbe...view more

This document provides the principles for implementing life cycle management (LCM) of concrete structures throughout the stages of planning, design, execution, use and end-of-life, as well as the framework and procedures for LCM. This document is applicable not only to new structures but also existing structures. It is also applicable to the entire life cycle and each one or more stages composing the life cycle of a structure. NOTE Details in the procedures and specific methodologies for managem...view more

This document specifies a laboratory measurement method to determine noise radiated from a floor covering on a standard concrete floor when excited by a standard tapping machine.

TC - Correction of unit in 4.2 and precision expression in 6.2

This document specifies a laboratory substitution method to determine the insertion loss without flow of ducted, mainly absorbent, circular and rectangular silencers, as well as other duct elements for use in ventilating and air-conditioning systems.
NOTE Laboratory measurement procedures for ducted silencers with superimposed flow are described in ISO 7235[5].
This document is applicable to silencers where the design velocity does not exceed 15 m/s. As the method does not include self-generat...view more

This document specifies procedures for assessing the measurement uncertainty of sound insulation in building acoustics. It provides for
— a detailed uncertainty assessment;
— a determination of uncertainties by inter-laboratory tests;
— an application of uncertainties.
Furthermore, typical uncertainties are given for quantities determined according to ISO 10140 (all parts), ISO 16283 (all parts) and ISO 717 (all parts).

This document describes basic, common minimum functional requirements and recommendations for an accessible and usable built environment, following the Design for All/Universal Design principles which will facilitate equitable and safe use for a wide range of users, including persons with disabilities.
The requirements and recommendations given in this document are applicable across the full spectrum of the built environment.
These functional accessibility and usability requirements and recomm...view more

CCMC - Corrections regarding reference EN 12390-7 in Clause 2, 7.2 and the Bibliography

DOP of 12 months

This document provides the opportunity to add information about the contents of a container by further
specializing the generic types of links specified in ISO 21597-1. The defined link types have been chosen
to enhance the use of the container by allowing the addition of semantic relationships that are human
interpretable to provide greater clarity about those links.

This document specifies the immunity performance criteria and test levels for apparatus used in lifts, escalators and moving walks which are intended to be permanently installed in buildings including the basic safety requirements in regard to their electromagnetic environment. These levels represent essential EMC requirements. This document refers to EM conditions as existing in residential, office and industrial buildings. This document addresses commonly known EMC related hazards and hazardou...view more

This European Standard specifies mechanical requirements and test methods for manually operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers manually operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail pr...view more

This document specifies concepts and principles to establish a methodology for specifying level of information need and information deliveries in a consistent way when using Building Information Modelling (BIM).
This document specifies the characteristics of different levels used for defining the detail and extent of information required to be exchanged and delivered throughout the life cycle of built assets. It gives guidelines for principles required to specify information needs.
The concept...view more

This document defines the requirements and tests relevant to Lightning Protection System Components suitable for explosive atmospheres (Ex-LPSC).

This document establishes the common vocabulary of the principal terms used in the field of reliability of structures and design actions used within ISO TC98 documents on bases for design of structures.

This document specifies the procedure and requirements for examining the technical commercial specifications of factory new piston-type concrete pump and rotary-type concrete pump as defined in ISO 21573‑1. It applies to mobile concrete pumps (with or without concrete-placing boom) and stationary concrete pumps.

This document describes processes, methods and procedures for the establishment within an organization of a procurement system for goods, services, and construction works or disposals, or any combination thereof that is fair, equitable, transparent, competitive and cost-effective. This document a) describes generic procurement processes around which an employer can develop its procurement system, b) establishes basic requirements for the conduct of an employer's employees, agents, board members ...view more

This document establishes, in respect of supply, services and construction contracts, at both main and subcontract levels, a) a format for the compilation of 1) calls for expressions of interest, 2) tender and contract documents, and b) the general principles for compiling procurement documents. NOTE 1: Annex A contains commentary on the clauses in this document. NOTE 2: This document can also be used, with some adaptation, in the formatting and compilation of concession contracts, design, build...view more

This document specifies the requirements for solid wall pipes with smooth internal and external surfaces, extruded from the same formulation throughout the wall, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping systems intended for soil and waste discharge applications (low and high temperature):
-   inside buildings (application area code "B");
-   for both inside buildings and buried in ground within the building structure (application area code "BD").
NOTE 1   The int...view more

This document specifies requirements for performance and testing of Mechatronic Cylinders and their keys and/or electronic keys.
It applies to cylinders for such locks designed to be normally used in buildings. It also applies to cylinders for use with other hardware products such as exit devices, door operators, etc. or monitoring facilities and alarm systems.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tes...view more

This document specifies requirements and provides recommendations applicable to the following types
of fixed steel offshore structures for the petroleum and natural gas industries:
— caissons, free-standing and braced;
— jackets;
— monotowers;
— towers.
In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups,
other bottom founded structures and other structures related to offshore structures (such as underwater
oil storage tanks, bridges a...view more

This document describes the characteristics of thunderstorm warning systems (TWSs) in order
to implement lightning hazard preventive measures.
Single sensors and/or a network of sensors (e.g. lightning location system) can be used as a
TWS.
This document provides requirements for sensors and networks collecting accurate data of the
relevant parameters, giving real-time information on lightning and atmospheric electric activity.
It describes the application of the data collected by these se...view more

The particular requirements of this part apply to fixed equipment in conducting locations where movement of persons is restricted by the location, and to supplies for portable equipment for use in such locations. A conducting location with restricted movement is comprised mainly of metallic or other conductive surrounding parts, within which it is likely that a person will come in contact through a substantial portion of his body with the metallic or other conductive surrounding parts and where ...view more

IEC 60050-845:2020 gives the general terminology used in lighting, as well as general terms pertaining to specific applications and associated technologies. This second edition reviews and complements the previous one. It has the status of a horizontal publication in accordance with IEC Guide 108:2006. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.

This standard defines requirements for factory made Vacuum Insulation Panels (VIP), which are used for the thermal insulation of buildings. This standard describes the product properties and contains test methods and rules for conformity evaluations, identification and labelling. The determination of VIP properties influencing the service life time and VIP performance is content of this standard as well. The standard provides a test method to determine the ageing of the product including the inf...view more

This document provides a transparent framework for reporting on the choices related to the procedure
to determine primary energy factors (PEFs) and CO2 emission coefficients for energy delivered to and
exported from the buildings as described in EN ISO 52000-1.
This document specifies the choices to be made to calculate the PEF(s) and CO2 emission coefficients
related to different energy carriers. PEFs and CO2 emission coefficients for exported energy can be
different from those chosen for ...view more

This document specifies methods for measuring the aerodynamic and acoustic characteristics of cowls and roof outlets used in both natural and mechanical ventilation. Only those cowls and roof outlets fitted onto ducts which project above the roof surface are covered by the present standard.
Regarding the assisted cowls, only the fan assisted cowls are covered by the present standard, other types (such as injection assisted cowls) being too recent to be adequately considered for the time being.
...view more

This draft European Standard specifies the requirements for factory made calcium silicate products with or without lamination or coating which are used for the thermal insulation of buildings.
Calcium silicate products have also the capability to regulate air moisture in building rooms, which means to absorb moisture from the air and opposite to give the moisture back to the room due to the capillarity of the product.
Calcium silicate insulation material comprising hydrated calcium silicate, n...view more