iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

91.120.30 - Waterproofing

ICS 91.120.30 Details

Waterproofing

Schutz gegen Feuchtigkeit

Etancheite a l'eau

Zaščita pred vlago

General Information

Parent
91.120 - Protection of and in buildings

e-Library Subscription

Create subscription and get permanent access to documents within 91.120.30 - Waterproofing

Type
Monthly Subscription
for
seat
×
$ 113.59
$ 113.59

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
SIST
SIST EN ISO 12571:2022(Main)
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2021)
EN ISO 12571:2021

This document specifies two alternative methods for determining hygroscopic sorption properties of
porous building materials and products:
a) using desiccators and weighing cups (desiccator method);
b) using a climatic chamber (climatic chamber method).
The desiccator method is the reference method.
This document does not specify the method for sampling.
The methods specified in this document can be used to determine the moisture content of a sample in
equilibrium with air at a specific temperature and humidity.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12572:2016(Main)
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
EN ISO 12572:2016

This document specifies a method based on cup tests for determining the water vapour permeance of
building products and the water vapour permeability of building materials under isothermal conditions.
Different sets of test conditions are specified.
The general principles are applicable to all hygroscopic and non-hygroscopic building materials and
products, including insulation materials and including those with facings and integral skins. Annexes
give details of test methods suitable for different material types.
The results obtained by this method are suitable for design purposes, production control and for
inclusion in product specifications.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15148:2003/A1:2016(Amendment)
Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion - Amendment 1 (ISO 15148:2002/Amd 1:2016)
EN ISO 15148:2002/A1:2016
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13788:2012(Main)
Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012, Corrected version 2020-05)
SIST EN ISO 13788:2013

ISO 13788:2012 gives simplified calculation methods for:
      The internal surface temperature of a building component or building element below which mould growth is likely, given the internal temperature and relative humidity. The method can also be used to assess the risk of other internal surface condensation problems.
      The assessment of the risk of interstitial condensation due to water vapour diffusion. The method used does not take account of a number of important physical phenomena including the variation of material properties with moisture content; capillary suction and liquid moisture transfer within materials; air movement from within the building into the component through gaps or within air spaces; the hygroscopic moisture capacity of materials.
      The time taken for water, from any source, in a layer between two high vapour resistance layers to dry out and the risk of interstitial condensation occurring elsewhere in the component during the drying process.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13788:2013(Main)
Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012)
EN ISO 13788:2012

This International Standard gives simplified calculation methods for: a) The internal surface temperature of a building component or building element below which mould growth is likely, given the internal temperature and relative humidity. The method can also be used to assess the risk of other internal surface condensation problems. b) The assessment of the risk of interstitial condensation due to water vapour diffusion. The method used does not take account of a number of important physical phenomena including: - the variation of material properties with moisture content; - capillary suction and liquid moisture transfer within materials; - air movement from within the building into the component through gaps or within air spaces; - the hygroscopic moisture capacity of materials. Consequently, the method is applicable only where the effects of these phenomena can be considered to be negligible. c) The time taken for water, from any source, in a layer between two high vapour resistance layers to dry out and the risk of interstitial condensation occurring elsewhere in the component during the drying process.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-4:2012

This standard specifies the requirements of waterproofings of buildings against groundmoisture. Part 4 gives details about the design and execution of waterproofings.

  • Standard + National Annex and/or Foreword
    13 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-9:2012

This standard is applicable in connection with waterproofing against - ground moisture according to DIN 18195-4 - non-pressing water according to DIN 18195-5 and - outside pressing water according to DIN 18195-6 used in penetrations, transitions and seals. This standard is not applicable to waterproof coverings for roofs or decks of bridges on public highways (see also DIN 18195-1).

  • Standard + National Annex and/or Foreword
    22 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-6:2012

This standard specifies the requirements of water-proofing of buildings. Part 6 gives details about the design and execution of water-proofings against outside pressing water.

  • Standard + National Annex and/or Foreword
    15 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-10:2012

This standard specifies rules for the execution of permanent protective layers for water-proofings against - ground moisture according to DIN 18195-4 - non-pressing water according to DIN 18195-5 and - outside pressing water according to DIN 18195-6 and states the protective measures which have to be taken to avoid damages of the water-proofing during the construction time.

  • Standard + National Annex and/or Foreword
    13 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-5:2012

This standard specifies the requirements of water-proofing of buildings. Part 5 gives details about the design and execution of water-proofings against non-pressing water.

  • Standard + National Annex and/or Foreword
    15 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-1:2012

This standard discribes principles of waterproofing of buildings. It contains definition and a table in which waterproofing types are assigned to the kind of water straining and the kind of soil.

  • Standard + National Annex and/or Foreword
    15 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-3:2012

This standard specifies the requirements of the waterproofing of buildings. Part 3 contains the description of the processing of the materials.

  • Standard + National Annex and/or Foreword
    17 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-8:2012

This standard is applicable in connection with waterproofing against - ground moisture according to DIN 18195-4 - non-pressing water according to DIN 18195-5 and - outside pressing water according to DIN 18195-6 for waterproofing of movement joints in structures.

  • Standard + National Annex and/or Foreword
    15 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15927-5:2004/A1:2011(Amendment)
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1 (ISO 15927-5:2004/Amd 1:2011)
SIST EN ISO 15927-5:2005/A1:2012

2011-02-08 EMA: // final draft received in ISO/CS (see notification from 2011-02-07 in dataservice).
MINOR AMENDMENT!!!     MINOR AMENDMENT!!!     MINOR AMENDMENT!!!     MINOR AMENDMENT!!!

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 15601:2012
Hygrothermal performance of buildings - Resistance to wind-driven rain of roof coverings with discontinuously laid small elements - Test method
CEN/TR 15601:2012

This draft European Standard specifies a method of test to determine the resistance of pitched roof coverings to wind-driven rain. The test method is applicable to discontinuously laid unsealed small roof covering elements such as clay tiles, concrete tiles, slates, fibre cement slates and shingles.

  • Technical report
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15601:2012(Main)
Hygrothermal performance of buildings - Resistance to wind - driven rain of roof coverings with discontinuously laid small elements - Test methods
SIST-TP CEN/TR 15601:2012

This Technical Report describes a method of test for determining the resistance of pitched roof coverings to wind-driven and deluge rain.
The test method is applicable to discontinuously laid unsealed small roof covering elements such as clay tiles, concrete tiles, slates, fibre cement slates and stones.
NOTE   The test method may be adapted for fittings.

  • Technical report
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15927-5:2005/A1:2012(Amendment)
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1 (ISO 15927-5:2004/A1:2011)
EN ISO 15927-5:2004/A1:2011

This standard specifies the definition, method of calculation and method of presentation of winter external design temperatures, used in determining the maximum heat requirements for space heating in buildings. This is linked to a measure of wind speed, for locations where low temperatures occur in conjunction with windy conditions.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-7:2011

This standard deals with the waterproofing of structures by means of bitumious materials, metal strips and synthetic waterproofing sheats to prevent leakage of water pressing from the inside, i. e. water exerting hydrostatic pressure on the waterproog seal from inside, such as in drinking water tanks, reservoirs, swimming pools and stormwater retention tanks. This standard does not deal with seals for earthworks or for protection against chemicals.

  • Standard + National Annex and/or Foreword
    12 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-2:2011

This standard specifies the requirements of materials which are to be used for waterproofings of buildings.

  • Standard + National Annex and/or Foreword
    19 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 16938:1997(Main)
Kunststoff-Dichtungsbahnen aus Weichmacherhaltigem Polyvinylchlorid (PVC-P) nicht bitumenverträglich; Anforderungen
  • Standard + National Annex and/or Foreword
    7 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 16935:1997(Main)
Kunststoff-Dichtungsbahnen aus Polyisobutilen (PIB); Anforderungen
  • Standard + National Annex and/or Foreword
    7 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15927-5:2004(Main)
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004)
SIST EN ISO 15927-5:2005

ISO 15927-5:2004 specifies the definition, method of calculation and method of presentation of the climatic data to be used in determining the design heat load for space heating in buildings. These include the winter external design air temperatures and the relevant wind speed and direction, where appropriate.
Heat loss through the ground, which also contributes to the heat load for buildings, depends on longer-term temperature changes; methods for calculating ground heat loss are given in ISO 13370.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15927-5:2005(Main)
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004)
EN ISO 15927-5:2004

This standard specifies the definition, method of calculation and method of presentation of winter external design temperatures, used in determining the maximum heat requirements for space heating in buildings. This is linked to a measure of wind speed, for locations where low temperatures occur in conjunction with windy conditions.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15148:2003(Main)
Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002)
EN ISO 15148:2002

This standard specifies a method for determining, by partial immersion with no temperature gradient, the short-term liquid water absorption coefficient. It is intended to assess the rate of absorption of water, by capillary action from continuous or driving rain during on site storage or construction, by insulating and other materials, which are normally protected. The method is suitable for renders or coatings tested in conjunction with the substrate on which they are normally mounted.
It is not intended to assess the absorption of water by materials used under water or in overall contact with saturated ground, where a total immersion test is more appropriate.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15927-1:2003(Main)
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements (ISO 15927-1:2003)
SIST EN ISO 15927-1:2004

ISO 15927-1:2003 specifies procedures for calculating and presenting the monthly means of those parameters of climatic data needed to assess some aspects of the thermal and moisture performance of buildings. Numerical values for any locations should be obtained from the meteorological service in the relevant country.
ISO 15927-1:2003 covers the following single climate variables: air temperature; atmospheric humidity; wind speed; precipitation; solar radiation; longwave radiation.
Meteorological instrumentation and methods of observation are not covered; these are specified by the World Meteorological Organisation (WMO).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12865:2002(Main)
Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure
EN 12865:2001

This standard specifies a general method for assessing the driving rain resistance of wall systems through determining the water tightness of wall systems under pulsating air pressure.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12865:2001(Main)
Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure
SIST EN 12865:2002

This standard specifies a general method for assessing the driving rain resistance of wall systems through determining the water tightness of wall systems under pulsating air pressure.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15026:2023(Main)
Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
EN 15026:2023

This document specifies the model components  to be used in a numerical hygrothermal simulation model for calculating the transient transfer of heat and moisture through building structures.
This document specifes a method to be used for validating a numeric hygrothermal simulation model claiming conformity with this ocument.

  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15026:2007(Main)
Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
EN 15026:2007

This standard specifies the equations to be used in a simulation method for calculating the non steady transfer of heat and moisture through building structures.  
It also provides a benchmark example intended to be used for validating a simulation method claiming conformity with this standard, together with the allowed tolerances.
The equations in this standard take account of the following storage and one-dimensional transport phenomena:
-   heat storage in dry building materials and absorbed water;
-   heat transport by moisture-dependent thermal conduction;
-   latent heat transfer by vapour diffusion;
-   moisture storage by vapour sorption and capillary forces;
-   moisture transport by vapour diffusion;
-   moisture transport by liquid transport (surface diffusion and capillary flow).
The equations described in this standard account for the following climatic variables:
-   internal and external temperature;
-   internal and external humidity;
-   solar and longwave radiation;
-   precipitation (normal and driving rain);
-   wind speed and direction.
The hygrothermal equations described in this standard shall not be applied in cases where:
-   convection takes place through holes and cracks;
-   two-dimensional effects play an important part (e.g. rising damp, conditions around thermal bridges, effect of gravitational forces);
•   hydraulic, osmotic, electrophoretic forces are present;
daily mean temperatures in the component exceed 50 °C.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12571:2013(Main)
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2013)
EN ISO 12571:2013

This International Standard specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products: a) using desiccators and weighing cups (desiccator method); b) using a climatic chamber (climatic chamber method). The desiccator method is the reference method. This International Standard does not specify the method for sampling. The methods specified in this International Standard can be used to determine the moisture content of a sample in equilibrium with air at a specific temperature and humidity.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12572:2002(Main)
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001)
EN ISO 12572:2001

This standard specifies a method based on cup tests for determining the water vapour permeance of building products and the water vapour permeability of building materials under isothermal conditions.  Different sets of test conditions are specified.
The general principles are applicable to all hygroscopic and non hygroscopic building materials and products, including those with facings and integral skins.  Annexes give details of test methods suitable for different material types.  This standard is not applicable in the case of test specimens with water vapour diffusion-equivalent air layer thickness values less than 0,1 m, as a result of increasing uncertainty in the measurement results.  If the measured water vapour diffusion-equivalent air layer thickness is greater than 1500 m the material can be considered impermeable.
The results obtained by this method are suitable for design purposes, production control and for inclusion in product specifications.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12571:2001(Main)
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000)
EN ISO 12571:2000

This Standard specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products: a) using desiccators and weighing cups (desiccator method); b) using a climatic chamber (climatic chamber method). The desiccator method is the reference method. The standard does not specify the method for sampling.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18540:1997(Main)
Abdichten von Außenwandfugen im Hochbau mit Fugendichtstoffen
  • Standard + National Annex and/or Foreword
    8 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13788:2002(Main)
Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2001)
EN ISO 13788:2001

This standard gives calculation methods for:
a)   The internal surface temperature of a building component or building element below which mould growth is likely, given the internal temperature and relative humidity - the method can also be used to assess the risk of other surface condensation problems.
b) The assessment of the risk of interstitial condensation due to water vapour diffusion. The method used assumes built-in water has dried out and does not take account of a number of important physical phenomena including:
- the dependence of thermal conductivity on moisture content;
- the release and absorption of latent heat;
- the variation of material properties with moisture content;
- capillary suction and liquid moisture transfer within materials;
- air movement through cracks or within air spaces;
- the hygroscopic moisture capacity of materials.
Consequently the method is applicable only to structures where these effects are negligible.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-1:2006(Main)
Bauwerksabdichtungen - Teil 1: Grundsätze, Definitionen, Zuordnung der Abdichtungsarten

The document specifies principles of  waterproofings of buildings. It contains definitions  and a table in which waterproofing types are  assigned to the kind of water straining and the kind  of soil.

  • Standard + National Annex and/or Foreword
    7 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-3:2006(Main)
Bauwerksabdichtungen - Teil 3: Anforderungen an den Untergrund und Verarbeitung der Stoffe

The document specifies the requirements of the  waterproofing of buildings. It contains the  description of the processing of the materials.

  • Standard + National Annex and/or Foreword
    11 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-8:2006(Main)
Bauwerksabdichtungen - Teil 8: Abdichtungen über Bewegungsfugen

This standard is applicable in connection with  waterproofing against - ground moisture according  to DIN 18195-4 - non-pressing water according to  DIN 18195-5 and - outside pressing water  according to DIN 18195-6 for waterproofing of  movement joints in structures.

  • Standard + National Annex and/or Foreword
    12 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-6:2006(Main)
Bauwerksabdichtungen - Teil 6: Abdichtungen gegen von außen drückendes Wasser und aufstauendes Sickerwasser; Bemessung und Ausführung

The document specifies the requirements on  waterproofing of buildings. It gives details about the  design and execution of waterproofings against  outside pressing water.

  • Standard + National Annex and/or Foreword
    9 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-10:2006(Main)
Bauwerksabdichtungen - Teil 10: Schutzschichten und Schutzmaßnahmen

This standard specifies rules for the execution of  permanent protective layers for water-proofings  against ground moisture according to DIN 18195-4,  non-pressing water according to DIN 18195-5 and  outside pressing water according to DIN 18195-6  and states the protective measures which have to  be taken to avoid damages of the water-proofing  during the construction time.

  • Standard + National Annex and/or Foreword
    10 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-4:2006(Main)
Bauwerksabdichtungen - Teil 4: Abdichtungen gegen Bodenfeuchte (Kapillarwasser, Haftwasser) und nichtstauendes Sickerwasser an Bodenplatten und Wänden, Bemessung und Ausführung

The document specifies the requirements on  waterproofings of buildings against  groundmoisture. It gives details about the design  and execution of waterproofings.

  • Standard + National Annex and/or Foreword
    7 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-5:2006(Main)
Bauwerksabdichtungen - Teil 5: Abdichtungen gegen nichtdrückendes Wasser auf Deckenflächen und in Nassräumen; Bemessung und Ausführung

The document specifies the requirements on  waterproofing of buildings. It gives details about the  design and execution of waterproofings against  non-pressing water.

  • Standard + National Annex and/or Foreword
    9 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-9:2006(Main)
Bauwerksabdichtungen - Teil 9: Durchdringungen, Übergänge, An- und Abschlüsse

This standard is applicable in connection with  waterproofing against - ground moisture according  to DIN 18195-4 - non-pressing water according to  DIN 18195-5 and - outside pressing water  according to DIN 18195-6 used in penetrations,  transitions and seals. This standard is not  applicable to waterproof coverings for roofs or  decks of bridges on public highways (see also DIN  18195-1).

  • Standard + National Annex and/or Foreword
    19 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-2:2006(Main)
Bauwerksabdichtungen - Teil 2: Stoffe

The document specifies the requirements of  materials which are to be used for waterproofings  of buildings.

  • Standard + National Annex and/or Foreword
    12 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-7:1997(Main)
Bauwerksabdichtungen - Teil 7: Abdichtungen gegen von innen drückendes Wasser; Bemessung und Ausführung
  • Standard + National Annex and/or Foreword
    6 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-8:1997(Main)
Bauwerksabdichtungen - Teil 8: Abdichtungen über Bewegungsfugen
  • Standard + National Annex and/or Foreword
    7 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-10:1997(Main)
Bauwerksabdichtungen - Teil 10: Schutzschichten und Schutzmaßnahmen
  • Standard + National Annex and/or Foreword
    7 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-3:1997(Main)
Bauwerksabdichtungen - Teil 3: Anforderungen an den Untergrund and Verarbeitung der Stoffe
  • Standard + National Annex and/or Foreword
    8 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-4:1997(Main)
Bauwerksabdichtungen - Teil 4: Abdichtungen gegen Bodenfeuchte (Kapilarwasser, Haftwasser) und nichtstauendes Sickerwasser an Bodenplatten und Wänden, Bemessung und Ausführung
  • Standard + National Annex and/or Foreword
    11 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-1:1997(Main)
Bauwerksabdichtungen - Teil 1: Grundsätze, Definitionen, Zuordnung der Abdichtungsarten
  • Standard + National Annex and/or Foreword
    6 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST DIN 18195-6:1997(Main)
Bauwerksabdichtungen - Teil 6: Abdichtungen gegen von außen drückendes Wasser und aufstauendes Sickerwasser; Bemessung und Ausführung
  • Standard + National Annex and/or Foreword
    9 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
50