91.190 - Building accessories
ICS 91.190 Details
Building accessories
Schlosserwaren
Accessoires pour le bâtiment
Stavbna oprema
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 91.190 - Building accessories
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This part of EN 13126 specifies the requirements and test procedures for durability, strength, security and functionality of handles.
This European Standard is applicable to Tilt and Turn, Tilt-First and Turn-Only hardware for use on windows and door-height windows.
Handles may also be used on other opening types, e.g. on In-line Sliding, Tilt and Slide, Sliding Folding, horizontal and vertical-pivoting windows.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft28 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 13126 series specifies the requirements and test procedures for durability, strength, security and functionality of handles.
This document is applicable to Tilt and Turn, Tilt-First and Turn-Only hardware for use on windows and door-height windows.
Handles can also be used on other opening types, e.g. on In-line Sliding, Tilt and Slide, Sliding Folding, horizontal and vertical-pivoting windows.
This document is not applicable to:
a) operation devices, door handles for door latches and door locks (for this, refer to EN 1906);
b) handles with handle length > 170 mm (refer to Figure B.1).
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft28 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides product category rules (PCR) for Type III environmental declarations for:
Building hardware products for opening and closing doors, gates, windows and shutters:
- Door and window handles (EN 1906)
- Hinges (EN 1935)
- Window fittings (EN 13126)
- Shutter hardware devices (e.g. EN 14648)
- Door closers (incl. door coordinators) and hold open devices (EN 1154 + A1, EN 1155, EN 1158 + A1)
- Sliding door gear (EN 1527, EN 15706)
- Glass door gear
Building hardware products for locking and unlocking doors, gates, windows and shutters:
- Locks (EN 12209, EN 15685)
- Locking cylinders (EN 1303)
- Padlocks (EN 12320)
- Push button locks (BS 8607)
- Exit devices (EN 179, EN 1125)
Electromechanical building hardware products:
- Mechatronic cylinders (EN 15684)
- Mechatronic padlocks (EN 16864)
- Mechatronic door furniture (EN 16867)
- Electromechanically operated locks and striking plates (EN 14846)
- Electrically controlled exit systems for use on escape routes (EN 13637)
This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012+A1:2013+A2:2019. The document is to be used in conjunction with EN 15804:2012+A1:2013+A2:2019.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
- defines the parameters to be declared and the way in which they are collated and reported;
- describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
- defines rules for the development of scenarios;
- includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied;
- includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
- defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft77 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and procedures to achieve and maintain protection of data and
sensitive information related to mechanical Master Key Systems and other mechanical key systems
where customer or application related data are being processed throughout the process of planning,
production, installation, and maintenance.
The requirements and test methods for mechanical cylinder locks is covered by EN 1303.
Reference is made to EN 1303 and Annexes relating to Master Key Systems (MKS).
Requirements relating to the information security of key based and non-key based electronic cylinders
are not covered.
- Technical specification10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Lift and Slide windows and door height windows in accordance with common application as shown in informative Annex C, regardless of whether the hardware enables an additional tilt position.
NOTE 1 This document is also applicable to hardware systems, whereby the sash itself is not lifted but a gasket mechanism is moved.
NOTE 2 This document is also applicable to hardware systems, whereby the sash itself is not lifted but the sash is being moved parallel to the plane of the frame.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides product category rules (PCR) for Type III environmental declarations for:
- Building hardware products for opening and closing doors, gates, windows and shutters:
-- Lever handles and knob furniture (EN 1906);
-- Single-axis hinges (EN 1935);
-- Hardware for windows and door height windows (EN 13126 (all parts));
-- Fittings for shutters (e.g. EN 14648);
-- Controlled door closing devices, electrically powered hold-open devices for swing doors and door coordinator devices (EN 1154, EN 1155, EN 1158);
-- Hardware for sliding doors, folding doors and roll fronts (EN 1527, EN 15706);
-- Glass door gear;
- Building hardware products for locking and unlocking doors, gates, windows and shutters:
-- Mechanically operated locks and locking plates, multipoint locks, latches and locking plates (EN 12209, EN 15685 );
-- Cylinders for locks (EN 1303);
-- Padlocks and padlock fittings (EN 12320);
-- Mechanically operated push-button locksets (BS 8607);
-- Emergency exit devices operated by a lever handle or push pad, for use on escape routes and panic exit devices operated by a horizontal bar, for use on escape routes (EN 179, EN 1125);
- Electromechanical building hardware products:
-- Mechatronic cylinders (EN 15684);
-- Mechatronic padlocks (EN 16864);
-- Mechatronic door furniture (EN 16867);
-- Electromechanically operated locks and striking plates (EN 14846);
-- Electrically controlled exit systems for use on escape routes (EN 13637).
This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012+A2:2019.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
- defines the parameters to be declared and the way in which they are collated and reported;
- describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
- defines rules for the development of scenarios;
- includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied;
- includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
- defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft77 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for durability, strength, security and function of sash balances.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and door height windows including requirements and test methods common to all hardware.
This document is applicable to the hardware suitable for windows and door height windows in Table 1, whatever the material used for the construction of the window.
Table 1 - Window opening-types
This document does not apply to the following:
— fusible links;
— hardware for lifting side-hung windows;
— fixing devices that are used to assemble or install a fixed window;
— devices that are used for the permanent fixing of a complete window into a building structure;
— mechanisms for the pneumatic or hydraulic remote operation of windows;
— single axis hinges (other than those, which provide a pivot-function for windows);
— single axis hinges as covered in EN 1935;
— hardware for sliding doors and folding doors as covered in EN 1527;
— door and window bolts as covered in EN 12051.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for durability, strength, security, and function of sash fasteners for windows and door height windows.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for durability, strength, security and function of espagnolettes and their striker plates for use on windows and door height windows.
Espagnolettes are defined as a locking mechanism for windows and door height windows that usually have a maximum handle movement of 90°.
This document does not include door bolts within the scope of EN 12051, or locks with latch and/or dead bolt within the scope of EN 12209 or multi-point locks within the scope of prEN 15685.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for the design manual system sliding doors, sliding corner doors and folding doors of the bi-fold type and multi-panel folding doors but excluding doors and panels. Cycle tests, static load, initial friction and corrosion resistance tests are included for fittings and track only.
This document covers door gear for all industrial, commercial and residential sliding doors and folding doors.
This document does not cover the rollers for horizontal sliding and building hardware for inward or outward sliding folding windows (types N Q, R and S) in accordance with EN 13126-15, building hardware for Lift and Slide windows (type P) in accordance with EN 13126-16 and building hardware for Tilt and Slide windows (type T) in accordance with EN 13126-17.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to mechanical padlocks and padlock fittings used on buildings and general use and specifies the test methods to be used.
This document specifies performance and other requirements for strength, security, durability, performance, and corrosion resistance of padlocks. It establishes one category of use, two categories of durability, six categories for corrosion resistance and six grades for security based on performance tests that simulate attack.
Limited manual attack testing is included in this document because the machine testing does not replicate all known manual attacks.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft29 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and procedures to achieve and maintain protection of data and sensitive information related to mechanical Master Key Systems and other mechanical key systems where customer or application related data are being processed throughout the process of planning, production, installation, and maintenance.
The requirements and test methods for mechanical cylinder locks is covered by EN 1303.
Reference is made to EN 1303 and Annexes relating to Master Key Systems (MKS).
Requirements relating to the information security of key based and non-key based electronic cylinders are not covered.
- Technical specification10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Lift and Slide windows and door height windows in accordance with common application as shown in informative Annex C, regardless of whether the hardware enables an additional tilt position.
NOTE 1 This document is also applicable to hardware systems, whereby the sash itself is not lifted but a gasket mechanism is moved.
NOTE 2 This document is also applicable to hardware systems, whereby the sash itself is not lifted but the sash is being moved parallel to the plane of the frame.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2 Exclusions
This document does not cover:
- mechatronic cylinders according to EN 15684;
- electromechanical operated locks and striking plates according to EN 14846.
- Standard66 pagesEnglish languagesale 10% offe-Library read for1 day
This part of prEN 13126 specifies requirements and test methods for durability, strength, security and function of espagnolettes and their striker plates for use on windows and door height windows.
NOTE Espagnolettes are defined as a locking mechanism for windows and door height windows that usually have a maximum handle movement of 90°.
This document does not include door bolts within the scope of EN 12051, or locks with latch and/or dead bolt within the scope of EN 12209 or multi-point locks within the scope of prEN 15885.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for durability, strength, security and function of sash balances.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and door height windows including requirements and test methods common to all hardware.
This document is applicable to the hardware suitable for windows and door height windows in Table 1, whatever the material used for the construction of the window.
This document does not apply to the following:
- fusible links,
- hardware for lifting side-hung windows,
- fixing devices that are used to assemble or install a fixed window,
- devices that are used for the permanent fixing of a complete window into a building structure,
- mechanisms for the pneumatic or hydraulic remote operation of windows,
- single axis hinges (other than those, which provide a pivot-function for windows),
- single axis hinges as covered in EN 1935,
- hardware for sliding doors and folding doors as covered in EN 1527
- door and window bolts as covered in EN 12051.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for durability, strength, security and function of sash fasteners for windows and door height windows.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to mechanical padlocks and padlock fittings used on buildings and general use, and specifies the test methods to be used.
This document specifies performance and other requirements for strength, security, durability, performance, and corrosion resistance of padlocks. It establishes one category of use, two categories of durability, six categories for corrosion resistance and six grades for security based on performance tests that simulate attack.
Limited manual attack testing is included in this document because the machine testing does not replicate all known manual attacks.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft29 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for the design manual system sliding doors, sliding corner doors and folding doors of the bi-fold type and multi-panel folding doors but excluding doors and panels. Cycle tests, static load, initial friction and corrosion resistance tests are included for fittings and track only.
This document covers door gear for all industrial, commercial and residential sliding doors and folding doors.
This document does not cover the rollers for horizontal sliding and building hardware for inward or outward sliding folding windows (types N Q, R and S) in accordance with EN 13126-15, building hardware for Lift and Slide windows (type P) in accordance with EN 13126-16 and building hardware for Tilt and Slide windows (type T) in accordance with EN 13126-17.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2 Exclusions
This document does not cover:
- mechatronic cylinders according to EN 15684;
- electromechanical operated locks and striking plates according to EN 14846.
- Standard66 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements and test procedures for durability, strength, security and functionality of finger catches for windows and door height windows.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for durability, strength, security and functionality of window fastener handles.
This document does not apply to the following hardware:
a) handles - primarily for Tilt and Turn, Tilt-First and Turn-Only hardware, refer to EN 13126-3;
b) sash fasteners, refer to EN 13126-14;
c) sliding closing devices, refer to EN 13126-19.
NOTE The handles covered by this document do not have a spindle and the spur is primarily used to achieve the locked closed position.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides a test method for determining the bearing capacity (pull out force) of a connection consisting of a screw in a screw thread channel, which cannot be calculated in accordance with current codes or conventional calculations. This document can be applied to several products, including doors, windows and curtain walling.
This document applies to screw thread channels made out of metal as well as metal screws.
The pull out forces of such connections may already be assessed indirectly with another test method e.g. wind load resistance for doors/windows according to EN 12211 or curtain walling kits according to EN 12179. Additional information with respect to the mechanical performance of connections and direct applications can be determined with the test method described in this document.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for durability, strength, security and functionality of window fastener handles.
This document does not apply to the following hardware:
a) handles - primarily for Tilt and Turn, Tilt-First and Turn-Only hardware, refer to EN 13126-3;
b) sash fasteners, refer to EN 13126-14;
c) sliding closing devices, refer to EN 13126-19.
NOTE The handles covered by this document do not have a spindle and the spur is primarily used to achieve the locked closed position.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for performance and testing of Mechatronic Cylinders and their keys and/or electronic keys.
It applies to cylinders for such locks designed to be normally used in buildings. It also applies to cylinders for use with other hardware products such as exit devices, door operators, etc. or monitoring facilities and alarm systems.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tests that simulate attack.
This document includes assessment of additional features when they are included in the cylinder design.
This document does not cover any other element of a security system, other than those directly involved in the control of a cylinder.
The suitability of cylinders for use on fire or smoke-door assemblies is determined by fire performance tests conducted in addition to the performance testing specified by this document (see Annex A).
- Standard52 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft54 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements and test procedures for durability, strength, security and functionality of finger catches for windows and door height windows.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the test method for determining the force required when engaging or releasing the hardware of a window and when commencing the movement of a casement or sash, in both opening and closing directions.
This document is applicable to all types of openable windows where the movement is a manual operation.
This document is applicable to products of any frame material.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for performance and testing of Mechatronic Cylinders and their keys and/or electronic keys.
It applies to cylinders for such locks designed to be normally used in buildings. It also applies to cylinders for use with other hardware products such as exit devices, door operators, etc. or monitoring facilities and alarm systems.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tests that simulate attack.
This document includes assessment of additional features when they are included in the cylinder design.
This document does not cover any other element of a security system, other than those directly involved in the control of a cylinder.
The suitability of cylinders for use on fire or smoke-door assemblies is determined by fire performance tests conducted in addition to the performance testing specified by this document (see Annex A).
- Standard52 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft54 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2 Exclusions
This document does not cover:
- mechatronic cylinders according to EN 15684;
- electromechanical operated locks and striking plates according to EN 14846.
- Standard66 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft66 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of rollers for horizontal sliding and hardware for inward or outward sliding folding windows and door height windows in accordance with common application as shown in Figures C.1 to C.7 in informative Annex C. This document is applicable to rollers irrespective of whether they are adjustable or not and irrespective of the method or type of fixing or if they are used independently, or in multiples or combinations.
All components of the hardware (e.g. guide tracks, lateral guides, rails, hinges) used while testing the rollers for sliding folding windows and door height windows (window types Q, R and S) are considered to be part of the complete sliding folding hardware set.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Tilt and Slide windows and door height windows in accordance with common application as shown in Figures C.1 and C.2 in informative Annex C.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Lift and Slide windows and door height windows in accordance with common application as shown in informative Annex C, regardless of whether the hardware enables an additional tilt position.
NOTE 1 This document is also applicable to hardware systems, whereby the sash itself is not lifted but a gasket mechanism is moved.
NOTE 2 This document is also applicable to hardware systems, whereby the sash itself is not lifted but the sash is being moved parallel to the plane of the frame.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60730-2-12:2015(E) applies to electrically operated door locks for use in, on or in association with equipment, including equipment for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard also applies to electrically operated door locks for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to electrically operated door locks intended exclusively for industrial process applications unless explicitly mentioned in the equipment standard. This standard does not apply to electrically operated door locks intended for security access applications. This part 2 is intended to be used in conjunction with IEC 60730-1. It was established on the basis of the fifth edition (2013) of that publication. Consideration may be given to future editions of, or amendments to, IEC 60730-1. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - aligns the text with IEC 60730-1, Edition 5; - modifies requirements for Class B control function (H.27.1.2.2); - modifies requirements for Class C control function (H.27.1.2.3) and - modifies requirements for faults during safety shut-down.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Lift and Slide windows and door height windows in accordance with common application as shown in informative Annex C, regardless of whether the hardware enables an additional tilt position.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Tilt and Slide windows and door height windows in accordance with common application as shown in informative Annex C.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of rollers for horizontal sliding and hardware for inward or outward sliding folding windows and door height windows in accordance with common application as shown in informative Annex C. This standard is applicable to rollers irrespective of whether they are adjustable or not and irrespective of the method or type of fixing or if they are used independently, or in multiples or combinations.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers vertically mounted types of manual or powered, operable fabric curtain assemblies with downward closing operation. Curtain systems are different from (are separated from) door systems due to their not rigid closure element typically made of thin walled materials as for instance woven or knitted fabrics and foils. These closure elements are not able to carry significant loads normal to their surface by their bending stiffness. In other words: curtain systems are separated from door systems because they can only conduct pulling forces by tensile stress in plane to their surface. Pushing forces are not conducted in plane to their surface.
This document establishes the methodology for extending the application of test results obtained from test(s) conducted in accordance with the EN 1634-1 test method for shutters.
Subject to the completion of the appropriate test or tests selected from those identified in Clause 4, the extended application may cover all or some of the following non-exhaustive list of examples:
- uninsulated (E), radiation (EW) or insulated (EI1 or EI2) classifications;
- coiling mechanisms;
- wall/ceiling fixed elements;
- items of building hardware;
- decorative finishes;
- intumescent, draught or acoustic seals;
- alternative supporting construction(s).
- Standard91 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of mechanically operated variable/parallel geometry stay hinges (with or without a friction system) whether fitted, with integral restrictors or not, in accordance with common application as shown in informative Annex D.
By means of this standard, the user of recognized tested hardware can assume that with correct usage, the variable/parallel geometry stay hinges (with or without a friction system) for windows conform to prescribed requirements.
NOTE 1 Balancing stay arms/hinges do not represent a friction system.
NOTE 2 For the purposes of this standard, the friction system is achieved by friction pads or similar.
- Standard40 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft40 pagesEnglish languagesale 10% offe-Library read for1 day
This part of prEN 13126 specifies requirements and test methods for durability, strength, security and function of mechanically operated variable/parallel geometry stay hinges (with or without a friction system) whether fitted, with integral restrictors or not, in accordance with common application as shown in informative Annex D.
By means of this standard, the user of recognized tested hardware can assume that with correct usage, the variable/parallel geometry stay hinges (with or without a friction system) for windows conform to prescribed requirements.
NOTE 1 Balancing stay arms/hinges do not represent a friction system.
NOTE 2 For the purposes of this standard, the friction system is achieved by friction pads or similar.
- Standard40 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft40 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the requirements and test procedures for durability, strength, security and function of Tilt and Turn, Tilt-First and Turn-Only hardware components or sets for windows and door height windows in accordance with common application as shown in informative Annex C.
NOTE To maintain the guaranteed characteristics during the utilization period, the manufacturers' product information and the manufacturers' maintenance and service instructions will be complied with in a manner that can be proven.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for performance and testing of mechatronic padlocks (MPs) and their keys and/or electronic keys.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tests that simulate attack. If the design incorporates mechanical security means in addition to the mechatronic means, these are also tested.
This European Standard does not cover any other element of a security system, other than those directly involved in the control of a padlock.
This European Standard does not cover the physical testing of multi-function devices such as Smartphones that may be used as part of the control system.
- Standard45 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft44 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method for determining the fire resistance of door and shutter assemblies and openable windows designed for installation within openings incorporated in vertical separating elements, such as:
a) hinged and pivoted doors;
b) horizontally sliding and vertically sliding doors including articulated sliding doors and sectional doors;
c) folding doors, sliding folding doors /shutters;
d) tilting doors;
e) rolling shutter doors;
f) openable windows;
g) operable fabric curtains.
This European Standard is used in conjunction with EN 1363-1.
The testing of fire dampers is covered by EN 1366-2.
The testing of closures for conveyor systems is covered by EN 1366-7.
By prior agreement with the test sponsor, additional information may be gained for individual elements of building hardware in order to fulfil the performance criteria identified in EN 1634-2. Based on the observations recorded during the test, the results may be presented in a separate report which should be in accordance with the requirements of EN 1634-2.
Doors tested in accordance with this European Standard and classified in accordance with EN 13501-2 may be accepted for lift landing door applications as an alternative to EN 81-58 and subject to National Regulations. EN 81-58 represents a specific test for lift landing doors and results in an alternative classification which may not be suitable for some other purposes as defined in National Regulations.
- Standard76 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates:
a) for use in doors in buildings;
b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire; and
c) for use on locked fire doors to maintain the fire integrity of the door assembly.
This European standard covers locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or produced by more than one producer, or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This European Standard specifies mechanically operated locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades.
This European standard does not specify Multipoint locks or their locking plates which are specified by prEN 15685.
This European Standard specifies the dimensions and properties required for security
Assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies is beyond the scope of this European Standard.
- Standard81 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard91 pagesGerman languagesale 10% offe-Library read for1 day
- Draft79 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the requirements and test procedures for durability, strength, security and function of Tilt and Turn, Tilt-First and Turn-Only hardware components or sets for windows and door height windows in accordance with common application as shown in informative Annex C.
NOTE To maintain the guaranteed characteristics during the utilization period, the manufacturers' product information and the manufacturers' maintenance and service instructions will be complied with in a manner that can be proven.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for performance and testing of mechatronic padlocks (MPs) and their keys and/or electronic keys.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tests that simulate attack. If the design incorporates mechanical security means in addition to the mechatronic means, these are also tested.
This European Standard does not cover any other element of a security system, other than those directly involved in the control of a padlock.
This European Standard does not cover the physical testing of multi-function devices such as Smartphones that may be used as part of the control system.
- Standard45 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft44 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard specifies requirements for the manufacture; performance and testing of electrically controlled exit systems, designed for use on escape routes. These systems consist of at least the following elements:- Initiating element for requesting the release of electrical locking element in order to exit;- Electrical locking element for securing an exit door;- Electrical controlling element for supplying, connecting and controlling electrical locking element and initiating element. In addition, these electrically controlled exit systems can include time delay and/or denied exit mode. This European Standard covers electrically controlled exit systems placed on the market as a complete unit (e.g. mortise lock, lever handle, keeper, initiating element, electrical locking element, electrical controlling element, etc.). The components are tested as a single product. This European Standard covers electrically controlled exit systems which are either manufactured and placed on the market in their entirety by one manufacturer or assembled from sub-assemblies produced by more than one manufacturer and subsequently placed on the market as a kit in a single transaction. The suitability of an electrically controlled exit system for use on fire/smoke resisting door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this European Standard.
- Standard126 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard covers hinged and pivoted steel (any kind) and aluminium based framed, glazed
doorsets or openable windows.
This European Standard prescribes the methodology for extending the application of test results obtained
from resistance to fire test(s) conducted in accordance with EN 1634-1.
Subject to the completion of the appropriate test or tests selected from those identified in Clause 4 the
extended application may cover all or some of the following examples:
- integrity (E), integrity/radiation (EW) or integrity/insulation (EI1 or EI2) classifications;
- doorsets and openable windows;
- door / window leaf (leaves);
- glazing and non-glazed panels in doorset and openable window;
- items of building hardware;
- decorative finishes;
- intumescent, smoke, draught or acoustic seals;
- alternative supporting construction(s).
- Standard132 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates:
a) for use in doors in buildings;
b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire; and
c) for use on locked fire doors to maintain the fire integrity of the door assembly.
This European standard covers locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or produced by more than one producer, or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This European Standard specifies mechanically operated locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades.
This European standard does not specify Multipoint locks or their locking plates which are specified by prEN 15685.
This European Standard specifies the dimensions and properties required for security
Assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies is beyond the scope of this European Standard.
- Standard81 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard91 pagesGerman languagesale 10% offe-Library read for1 day
- Draft79 pagesEnglish languagesale 10% offe-Library read for1 day