97.200.30 - Camping equipment and camp-sites
ICS 97.200.30 Details
Camping equipment and camp-sites
Campingausrustung. Campingplatze
Matériel et terrains de camping
Oprema za taborjenje in tabori
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 97.200.30 - Camping equipment and camp-sites
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities. This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Draft6 pagesEnglish languagesale 15% off
- Draft7 pagesFrench languagesale 15% off
This document gives a list of the most frequent terms relating to camping tents and caravan awnings together with some definitions.
- Standard30 pagesEnglish languagesale 15% off
This method of test specifies a test method for determining the thermal resistance of textile articles which may be filled, e.g. padded coats and jackets, child sleep bags, cot duvets, etc., or textiles articles with a thermal resistance of up to 0,5 m2K/W (5,0 tog) and/or which do not have uniform thickness.
The test method is applicable to products with a thermal resistance within the range 0,025 m2K/W (0,25 tog) to approximately 0,5 m2K/W (5,0 tog) but is limited only by the ability of the test apparatus to cope with the thickness of the test sample.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements, test methods and other provisions for the labelling of adult sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding thermal characteristics, dimensions and mass.
This document describes a method for the assessment of performance in steady‐state conditions of a sleeping bag with regard to the protection against cold.
NOTE 1 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means of establishing temperature ratings.
This document does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 2 No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not possible.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements, test methods and other provisions for the labelling of adult
sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding
thermal characteristics, dimensions and mass.
This document describes a method for the assessment of performance in steady‐state conditions of a
sleeping bag with regard to the protection against cold.
NOTE 1 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain
parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means
of establishing temperature ratings.
This document does not apply to sleeping bags intended for specific purpose such as military use and
extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 2 No prediction model exists for the determination of the limiting temperatures based on the thermal
resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed
because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical
reasons, not possible.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This method of test described a means of determining the thermal resistance of textile assemblies with a non-uniform thickness and child sleep bags and cot duvets. The test method is suitable for products with a thermal resistance within the range 0.25 tog (0.025 m².K/W) to 5.0 tog (0.5 m².K/W).
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements, test methods and other provisions for the labelling of adult sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding thermal characteristics, dimensions and mass. This document describes a method for the assessment of performance in steady‐state conditions of a sleeping bag with regard to the protection against cold. NOTE 1 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means of establishing temperature ratings. This document does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies. NOTE 2 No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not possible.
- Standard25 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
This document specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles.
It details health and safety requirements on:
— the selection of materials;
— components and appliances;
— design considerations;
— tightness testing of installations;
— the contents of the user's handbook.
This document only covers installations supplied with 3rd family gases (LPG).
It does not cover:
— water connections or electrical power supplies to the appliance(s);
— portable appliances, incorporating their own LPG supply;
— the installation of LPG appliances to be used for commercial purposes;
— LPG installations on boats;
— LPG supply equipment and LPG appliances separate from and external to the body of the vehicle.
This document covers LPG tanks fulfilling the requirements of the Pressure Equipment Directive (2014/68/EU).
Attention is drawn to the Pressure Equipment Directive (2014/68/EU) for any parts of the installation operating above 0,5 bar.
- Standard50 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft44 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements on safety, performance and fitness for use of camping tents.
NOTE For caravan awnings, see ISO 8936.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60364-7-708:2017(E) lays down requirements applying only to circuits intended to supply leisure accommodation vehicles, tents or residential park homes in caravan parks, camping parks and similar locations. This new edition includes the following significant technical changes with respect to the previous edition: - new requirements to protect against impact; - new requirements for socket outlets and connectors.
- Standardization document15 pagesEnglish languagesale 10% offe-Library read for1 day
EN-ISO 5912 specifies the requirements on safety, performance and fitness for use of camping tents.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements on safety, performance and fitness for use of camping tents. NOTE For caravan awnings, see ISO 8936.
- Standard24 pagesEnglish languagesale 15% off
- Standard25 pagesFrench languagesale 15% off
This European Standard specifies the general safety requirements for outdoor seating and tables for adults for camping, domestic and contract use.
It does not apply to removable upholstery, coverings, seating for spectator facilities, seating and tables for children.
Mechanical safety requirements are covered by prEN 581-2 for seating and prEN 581-3 for tables.
Annex A (informative) is a schematic presentation of requirements and conditions concerning shear and squeeze points.
Annex B (informative) is a rational concerning fingers entrapment.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the mechanical safety requirements and test methods for outdoor tables used by adults for camping, domestic and contract use without regard to materials, design/construction or manufacturing processes. This standard excludes tables using glass in their construction. This document does not apply to outdoor furniture for severe contract use where higher requirements may be necessary, nor does it apply to street furniture and furniture permanently fixed to the ground/wall. Annex A (informative) specifies guidelines for purchase information. Information regarding ageing and degradation caused by light, temperature and moisture has not been included.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the general safety requirements for outdoor seating and tables for adults for camping, domestic and contract use.
It does not apply to removable upholstery, coverings, seating for spectator facilities, seating and tables for children.
Mechanical safety requirements are covered by prEN 581-2 for seating and prEN 581-3 for tables.
Annex A (informative) is a schematic presentation of requirements and conditions concerning shear and squeeze points.
Annex B (informative) is a rational concerning fingers entrapment.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
The particular requirements contained in this part of IEC 60364 apply only to circuits intended
to supply leisure accommodation vehicles, tents or residential park homes in caravan parks,
camping parks and similar locations.
NOTE For the purposes of this document caravan park includes camping parks and similar locations.
The particular requirements do not apply to the internal electrical installations of leisure
accommodation vehicles, mobile or transportable units or residential park homes.
- Standardization document15 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 8936:2017 specifies requirements, test methods and material performance characteristics for vehicle awnings. It applies to awnings intended to be pitched and struck.
ISO 8936:2017 is not applicable to:
a) sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 1 A sun awning can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document.
b) external blinds: structure permanently fixed to a vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 2 An external blind can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document.
c) fixed awnings: permanent awning which is not designed for mobile use.
EXAMPLE Awnings equipped with square aluminium frames or timber supporting structures and the possibility to install living compartment windows and doors.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor tables for adults, without regard to materials, design/construction or manufacturing processes.
It does not apply to street furniture.
With the exception of stability tests the standard does not provide assessment of the suitability of any storage features included in tables.
It does not include requirements for the durability of castors/wheels and height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements, test methods and material performance characteristics for
vehicle awnings. It applies to awnings intended to be pitched and struck.
This document is not applicable to:
a) sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun,
but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 1 A sun awning can be used with additional front and side panels to form an enclosure, but this
enclosure would not meet the requirements of an awning as defined in this document.
b) external blinds: structure permanently fixed to a vehicle which is used to provide shelter from the
sun, but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 2 An external blind can be used with additional front and side panels to form an enclosure, but this
enclosure would not meet the requirements of an awning as defined in this document.
c) fixed awnings: permanent awning which is not designed for mobile use.
EXAMPLE Awnings equipped with square aluminium frames or timber supporting structures and the
possibility to install living compartment windows and doors.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 8936:2017 specifies requirements, test methods and material performance characteristics for vehicle awnings. It applies to awnings intended to be pitched and struck. ISO 8936:2017 is not applicable to: a) sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow; NOTE 1 A sun awning can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document. b) external blinds: structure permanently fixed to a vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow; NOTE 2 An external blind can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document. c) fixed awnings: permanent awning which is not designed for mobile use. EXAMPLE Awnings equipped with square aluminium frames or timber supporting structures and the possibility to install living compartment windows and doors.
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
This European Standard specifies a method of measurement of the volume under load of sleeping bags and a method of calculation of easiness of packing of sleeping bags filled with feather and/or down.
- Standard6 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 23537 specifies the fabric and material properties as well as provisions for labelling
of adult sized sleeping bags for use in sports and leisure time activities. Thermal and dimensional
requirements are specified in ISO 23537-1.
This part of ISO 23537 does not apply to sleeping bags intended for specific purpose such as military
use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE No prediction model exists for the determination of the limiting temperatures based on the thermal
resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed
because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical
reasons, not permitted.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
Corrigendum issued in July 2016 - TC origin (modification to several tables)
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method of measurement of the volume under load of sleeping bags as specified in prEN 13537 and a method of calculation of easiness of packing of sleeping bags filled with feather and/or down.
- Standard6 pagesEnglish languagesale 10% offe-Library read for1 day
Corrigendum issued in July 2016 - TC origin (modification to several tables)
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor seating for adults, without regard to materials, design/construction or manufacturing processes.
It does not apply to street furniture.
It does not apply to removable upholstery and covering.
It does not include requirements for the durability of castors/wheels and height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture.
The test requirements contained within this standard are based on use by persons weighing up to 110 kg.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 581 specifies the mechanical safety requirements and test methods of outdoor seating for camping, domestic and contract use for adults, without regard to materials, design/construction or manufacturing processes. This document does not apply to outdoor furniture for severe contract use, where higher requirements may be necessary nor to removable upholstery and coverings, permanently fixed furniture and street furniture. The test requirements contained within this European Standard are based on use by persons weighing up to 110 kg. Information regarding ageing and degradation caused by light, temperature and moisture has not been included. Annex A (normative) specifies additional test methods for seating with multi-position back rests. Annex B (normative) specifies test methods for loungers. Annex C (informative) specifies guidelines for purchase information.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
EN 15619 specifies the characteristics, requirements and test methods for coated fabric intended for mobile, temporary installed tents and related structures. Plastic film and material other than coated fabrics are not covered by this European Standard.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics, requirements and test methods for coated fabric intended for mobile, temporary installed tents (see 3.3) and related structures.
Plastic film and material other than coated fabrics are not covered by this European Standard.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
Contains a list of the most frequent terms relating to camping tents and caravan awnings together with some definitions. It also gives the relevant terms used in ISO 5912:1993, ISO 8936:1988 and ISO 8937:1991. Replaces the first edition.
- Standard50 pagesEnglish languagesale 15% off
- Standard41 pagesEnglish, French and German languagesale 10% offe-Library read for1 day
This European Standard specifies a method for the determination of the thickness and elastic recovery of sleeping bags filled with feathers and/or down.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method for the determination of the thickness and elastic recovery of sleeping bags filled with feathers and/or down.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
Same as EN 1949:2011
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
Same as EN 1949:2011
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 23537-2:2016 specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities. Thermal and dimensional requirements are specified in ISO 23537‑1.
ISO 23537-2:2016 does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not permitted.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
2018-01-09 - TC decision is missing to skip Formal Vote. email sent to TC requesting TC decision on 2018-01-09. email saved on network (standards).
2018-01-10 - TC decision received to skip FV.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 23537 specifies the requirements and test methods as well as provisions for labelling of
adult sized sleeping bags for use in sports and leisure time activities.
This part of ISO 23537 does not apply to sleeping bags intended for specific purpose such as military
use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 1 No prediction model exists for the determination of the limiting temperatures based on the thermal
resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed
because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical
reasons, not permitted.
NOTE 2 The limit temperature for extreme climate conditions is seen to be −20 °C.
This part of ISO 23537 describes the method for the assessment of the performance in steady-state
conditions of a sleeping bag with regard to the protection against cold.
NOTE 3 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain
parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means
of establishing temperature ratings.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
2018-01-09 - TC decision is missing to skip Formal Vote. email sent to TC requesting TC decision on 2018-01-09. email saved on network (standards).
2018-01-10 - TC decision received to skip FV.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 23537-1:2016 specifies the requirements and test methods as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
ISO 23537-1:2016 does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 1 No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not permitted.
NOTE 2 The limit temperature for extreme climate conditions is seen to be −20 °C.
ISO 23537-1:2016 describes the method for the assessment of the performance in steady-state conditions of a sleeping bag with regard to the protection against cold.
NOTE 3 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means of establishing temperature ratings.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles. It details safety and health requirements on the selection of materials, components and appliances, on design considerations and tightness testing of installations and on the contents of the user's handbook.
This European Standard does not cover installations supplied from other than 3rd family gases (LPG), water connections or electrical power supplies to the appliance(s). Portable appliances, incorporating their own gas supply, are not considered part of the installation and are outside the scope of this standard. It does not include the installation of LPG appliances to be used for commercial purposes or for boats. Gas supply equipment and gas appliances separate from and external to the body of the vehicle are also not considered by this standard.
- Standard37 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard37 pagesGerman languagesale 10% offe-Library read for1 day
- Amendment3 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment3 pagesEnglish languagesale 10% offe-Library read for1 day
The particular requirements contained in this part of IEC 60364 apply only to circuits intended to supply leisure accommodation vehicles, tents or residential park homes in caravan parks, camping parks and similar locations.
- Standardization document12 pagesEnglish languagesale 10% offe-Library read for1 day
- Standardization document12 pagesGerman languagesale 10% offe-Library read for1 day
ISO 5912:2011 specifies requirements for safety, performance and fitness for use of camping tents (referred to as "tents" throughout).
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 5912:2011 specifies requirements for safety, performance and fitness for use of camping tents (referred to as "tents" throughout).
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
This European Standard specifies the mechanical safety requirements and test methods for outdoor tables used by adults for camping, domestic and contract use without regard to materials, design/construction or manufacturing processes. This standard excludes tables using glass in their construction.
This document does not apply to outdoor furniture for severe contract use where higher requirements may be necessary, nor does it apply to street furniture and furniture permanently fixed to the ground/wall.
Annex A (informative) specifies guidelines for purchase information.
Information regarding ageing and degradation caused by light, temperature and moisture has not been included.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the general safety requirements for outdoor seating and tables for camping, domestic and contract use.
It does not apply to removable upholstery, coverings and permanently fixed furniture.
Annex A (informative) is a schematic presentation of requirements and conditions concerning shear and squeeze points.
Annex B (informative) includes a terminology for outdoor furniture.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day