2020-12-02 JF: ISO/CS confirmed that the changes addressing HAS assessment will be incorporated in the final ISO draft (editorial changes).
2020-11-18 JF: information on the resolution of LoC HAS assessment has been provided to ISO/CS
2020-10-09 Lack of compliance assessment at 2nd FV has been resolved by CEN/TC 144.
2020-04-16: Second // vote to be launched to follow ISO similar decision

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

1.1 This document specifies, in accordance with ISO 10326-1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines.
1.2 This document is applicable to operator seats used on earth-moving machines as defined in
ISO 6165.
1.3 This docu...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

1.1 This document specifies, in accordance with ISO 10326‑1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines.
1.2 This document is applicable to operator seats used on earth-moving machines as defined in ISO 6165.
1.3 This docum...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method. Its object is to enable the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. This European Standard is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

ISO 13854:2017 enables the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. It specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method.
ISO 13854:2017 is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in.
NOTE For impact, shearing, drawing-in hazards, additional or other measures are to be taken.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This standard specifies the technical safety requirements and protective measures to be adopted by persons undertaking the
design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance)
of machines for cold working of metal with geometrically-defined cutting edge tools (milling).
This international standard takes account of intended use, including reasonably foreseeable misuse, maintenance, cleaning,
and setting operations. It specifies ...
view more

    • sale 10% off
    • Standard
      162 pages
      English language
    • e-Library read for
      1 day

1.1   General
This European Standard specifies the technical requirements to minimize the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of maintenance stairs and platforms when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorized representative. It also takes into account some requirements recognized as essential by a...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

1.1   General
This document specifies the technical requirements to minimize the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of maintenance or service stairs and platforms when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorized representative. It also takes into account some requirements recognized as essential by...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This standard specifies technical safety requirements and measures to be adopted by persons undertaking the design (as defined in EN 12100), manufacture and supply of hydraulic presses which are intended to work cold metal or material partly of cold metal.
This standard applies in combination with ISO 16092-1. Both parts together cover all significant hazards relevant for hydraulic presses which are intended to work cold metal or material partly of cold metal, when they are used as intended and...
view more

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

This International standard specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses and ancillary devices which are intended to work cold metal or material partly of cold metal.
The requirements in this International standard take account of intended use, as defined in 3.22 of ISO 12100-1:2003. This standard presumes access to the press from all directions, deals with the hazards during the various phases of the life...
view more

    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies designed-in means aimed at preventing unexpected machine start-up to allow safe human interventions in hazard zones. It applies to unexpected start-up from all types of energy source, i.e.  power supply, e.g. electrical, hydraulic, pneumatic, stored energy due to, e.g., gravity, compressed springs and external influences, e.g. from wind.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

ISO 16090-1:2017 specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2), machining centres and transfer machines which are intended to cut cold metal, and other non-combustible cold materials except for wood or materials with physical charact...view more

    • sale 10% off
    • Standard
      162 pages
      English language
    • e-Library read for
      1 day

ISO 16092-3:2017, in addition to ISO 16092‑1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic presses which are intended to work cold metal or material partly made up of cold metal.
The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces...
view more

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

ISO 14118:2017 specifies requirements for designed-in means aimed at preventing unexpected machine start-up (see 3.2) to allow safe human interventions in danger zones (see Annex A).
ISO 14118:2017 applies to unexpected start-up from all types of energy source, i.e.:
- power supply, e.g. electrical, hydraulic, pneumatic;
- stored energy due to, e.g. gravity, compressed springs;
- external influences, e.g. from wind.
ISO 14118:2017 does not specify performance levels or safety integrity leve...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

ISO 16092-1:2017 specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses which are intended to work cold metal or material partly of cold metal, but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather, etc.).
NOTE 1 The design of a machine includes the study of the machine itself, taking into account all phases of the "life" of the machine mentioned in ISO 12100:...
view more

    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This International standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting up, maintenance, and repair) of machines, as defined in clause 3 of this standard, whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a sawing tool.
This international standard takes into account the intended use, reasonably foreseeable misuse...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

ISO 16093:2017 deals with all significant hazards, hazardous situations and events to sawing machines as defined in Clause 3, whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
ISO 16093:2017 is applicable to (metal) sawing machines which are manufactured after the date of publication of this document.
When additional processing (i.e. ...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

This part of ISO 3691 gives safety requirements and the means for their verification, additional to those
of ISO 3691-1, for industrial trucks with a vertical, non-tilting mast:
a) those trucks having an elevating operator position, and order‑picking trucks, as defined in
ISO 5053-1, where the elevating operator position and the load‑handling device lifts to a height of
more than 1 200 mm above ground level;
b) lateral- and front-stacking trucks, as defined in ISO 5053-1, designed to travel...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

ISO 3691-3:2016 gives safety requirements and the means for their verification, additional to those of ISO 3691‑1, for industrial trucks with a vertical, non-tilting mast:
a) those trucks having an elevating operator position, and order‑picking trucks, as defined in ISO 5053‑1, where the elevating operator position and the load‑handling device lifts to a height of more than 1 200 mm above ground level;
b) lateral- and front-stacking trucks, as defined in ISO 5053‑1, designed to travel with a l...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, that are applicable to windows (including roof windows, roof windows with external fire resistance and door height windows), external pedestrian doorsets (and their assemblies, including unframed glass doorsets, escape route doorsets) and screens.
Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are cover...
view more

    • sale 10% off
    • Standard
      76 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      72 pages
      German language
    • e-Library read for
      1 day

This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, that are applicable to windows (including roof windows, roof windows with external fire resistance and door height windows), external pedestrian doorsets (and their assemblies, including unframed glass doorsets, escape route doorsets) and screens.
Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are cover...
view more

    • sale 10% off
    • Standard
      76 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      72 pages
      German language
    • e-Library read for
      1 day

This European Standard specifies a procedure which leads to the selection of critical factors relating to emissions of hazardous substances for the purpose of specifying suitable verification procedures.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies functional requirements and design principles for the emergency
stop function on machinery, independent of the type of energy used.
It does not deal with functions such as reversal or limitation of motion, deflection of emissions (e.g.
radiation, fluids), shielding, braking or disconnecting, which can be part of the emergency stop function.
The requirements for this International Standard apply to all machines, with exception to:
— machines where an eme...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This part of ISO 3691 gives safety requirements and the means for their verification for self-propelled
carriers designed for carrying burdens without lifting, as defined in ISO 5053, and/or personnel
carriers, having three or more wheels, a maximum speed not exceeding 56 km/h and a load capacity not
exceeding 5 000 kg (hereafter referred to as carriers or trucks).
This part of ISO 3691 is applicable to trucks equipped with a platform (which can be tilting) for the
purpose of carrying mater...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

The document specifies general requirements for the design and construction of guards provided primarily to protect persons from mechanical hazards. The standard applies primary to machines which are manufactured after the date of issue of this standard.
Attention is drawn to the use of guards to minimise exposure to non-mechanical hazards. The requirements are applicable if fixed and movable guards are used. The standard does not cover those parts of guards which actuate interlocking devices. T...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies electrical and flammability safety requirements for conveyor belts
intended for use in underground installations, in the presence of flammable or non-flammable
atmospheres.
Conveyor belts covered by this European Standard and intended for use in flammable atmospheres are
intended for use on conveyor belt installations (machinery in mines). The belt is a component or part of
equipment, which can be incorporated into the conveyor, which is an equipment of Grou...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with principles for the control of risks to health due to hazardous substances from machinery.
This European Standard is not applicable to substances which are a hazard to health solely because of their explosive, flammable or radioactive properties or their behaviour at extremes of temperature or pressure.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

ISO 14123-2:2015 establishes a methodology that leads to the selection of critical factors relating to emissions of hazardous substances for the purpose of specifying suitable verification procedures.
ISO 14123-2:2015 is intended to be used in conjunction with ISO 14123‑1 and relates specifically to ISO 14123‑1:2015, Clause 8.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

from CEN/TC 188 N362: The revision of EN 14973 should be started to bring it in line with the revised EN 12881-1 and EN 12881-2. (see Resolution 2/2011). The experts present agree that an Annex should be added to EN 14973 to specify that Family approval for belts is possible. Resolution 2/2011: The experts present agree that general revision of EN 14973 and EN 12882 is needed due to the work being done on EN 12881-1 and EN 12881-2.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

ISO 14120:2015 specifies general requirements for the design, construction, and selection of guards provided to protect persons from mechanical hazards.
ISO 14120:2015 indicates other hazards that can influence the design and construction of guards.
ISO 14120:2015 applies to guards for machinery which will be manufactured after it is published.
The requirements are applicable if fixed and movable guards are used. This International Standard does not cover interlocking devices. These are cover...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

ISO 14123-1:2015 establishes principles for the control of risks to health resulting from hazardous substances emitted by machinery.
ISO 14123-1:2015 is not applicable to substances that are a hazard to health solely because of their explosive, flammable or radioactive properties or their behaviour at extremes of temperature or pressure.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

ISO 13850:2015 Standard specifies functional requirements and design principles for the emergency stop function on machinery, independent of the type of energy used.
It does not deal with functions such as reversal or limitation of motion, deflection of emissions (e.g. radiation, fluids), shielding, braking or disconnecting, which can be part of the emergency stop function.
The requirements for this International Standard apply to all machines, with exception to:
- machines where an emergency...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

ISO 3691-6:2013 gives safety requirements and the means for their verification for self-propelled carriers designed for carrying burdens without lifting, as defined in ISO 5053, and/or personnel carriers, having three or more wheels, a maximum speed not exceeding 56 km/h and a load capacity not exceeding 5 000 kg.
It is applicable to trucks equipped with a platform (which can be tilting) for the purpose of carrying materials or with a number of seats for the purpose of transporting passengers.
...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This standard specifies safety and hygiene requirements for the design and manufacture of dough sheeters used in the food industry and shops (bread-making, pastry-making, sweet industries, bakeries, confectioners, delicatessens, catering facilities, etc) for reducing the thickness of a solid mass of dough or pastry by rolling it out. The operation is generally carried out by passing the dough back and forth between the rollers whose distance apart is reduced progressively either by manual adjust...view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety and hygiene requirements for the design and manufacture of dough sheeters, as described in Clause 3, used in the food industry and craft activities (bread-making, pastry-making, sweet industries, bakeries, confectioners, delicatessens, catering facilities, etc.) for reducing the thickness of a solid mass of dough or pastry by rolling it out.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the transpor...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This International Standard provides technical information on the design of textile machinery
with reduced noise emissions. Textile machines with a significant noise hazard are defined in
ISO 11111 (all parts).
This International Standard supports the technical designer with the development of low-noise textile
machinery. For this purpose, the significant sources of noise of the individual types of textile machines
and suitable noise control measures are described.
Elements needed for the ...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

ISO 23771:2015 provides technical information on the design of textile machinery with reduced noise emissions. Textile machines with a significant noise hazard are defined in ISO 11111 (all parts).
ISO 23771:2015 supports the technical designer with the development of low-noise textile machinery. For this purpose, the significant sources of noise of the individual types of textile machines and suitable noise control measures are described.

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This standard specifies safety and hygienic design requirements for the manufacture of machines used for the production of pies, tarts, pasties, en croute products and other similar items where the pastry cases are formed by the closing under pressure of one or more forming heads. The standard applies to the following three basic types of machine:
- machines where operators hands enter hazard zone 1 (see 4.1) at each cycle;
- machines which are loaded outside hazard zone 1;
- automatic machin...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies the maximum permissible values of unbalances for bonded
abrasive wheels with an outside diameter D ≥ 125 mm and maximum operating speed vs ≥ 16 m/s, in the
as-delivered condition.
It also specifies the method for measuring the unbalance and the practical method for testing whether
a grinding wheel is acceptable or not.
This International Standard is applicable to bonded abrasive wheels in the as-delivered condition.
This International Standard is not a...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

1.1   This European Standard specifies safety and hygiene requirements for the design and manufacture of intermediate provers with powered moving pocket carriers as described in Clause 3 and used in the food industry, pastry-making, bakeries, etc. for giving a resting time to dough between different phases of the process.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the installation, adjustment, operation, cleaning, maintenance, dismantlin...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

ISO 6103:2014 specifies the maximum permissible values of unbalances for bonded abrasive wheels with an outside diameter D ≥ 125 mm and maximum operating speed vs ≥ 16 m/s, in the as-delivered condition. It also specifies the method for measuring the unbalance and the practical method for testing whether a grinding wheel is acceptable or not.
It is applicable to bonded abrasive wheels in the as-delivered condition.
It is not applicable to diamond, cubic boron nitride or natural stone grinding ...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

EN 16228-7, together with part 1, deals with all significant hazards for interchangeable auxiliary equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014. This document does not repeat the requirements from EN 16228-1, but adds or replaces the requiremen...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

EN ISO 11200 is the frame standard introducing the basic group, ISO 11201, ISO 11202, ISO 11203, ISO 11204 and ISO 11205, on the determination of emission sound pressure levels at work stations and other specified positions. It gives guidance for: - facilitating the writing of noise test codes; - providing physical explanations of this noise emission quantity compared to other noise quantities (see 4.1 to 4.3); - comparing the different measurement methods offered by the group (see Table 1); - f...view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

EN 16228-1 specifies the common safety requirements for drilling and foundation equipment. Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment (see Annex A), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage...view more

    • sale 10% off
    • Standard
      152 pages
      English language
    • e-Library read for
      1 day

EN 16228-4, together with part 1, deals with all significant hazards for foundation equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014 This document does not repeat the requirements from EN 16228-1:2014 but adds or replaces the requirements for appli...view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

EN 16228-3, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014.

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

EN 16228-5, together with part 1, deals with all significant hazards for diaphragm walling equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

EN 16228-2, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). In this document the general term “mobile drill rig” covers several different types of machines for use in: - civil engineering; - geotechnical engineering (inclu...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day