This European Standard covers all life cycle stages, from cradle to grave, namely product stage, construction process stage, use stage and end-of-life stage of glass products (see point 4), used in buildings.
While covering all life cycle stages, this PCR primarily focuses on the product stage, in particular the manufacturing of flat glass and the consequent processing into flat glass products (as listed in point 4.), from cradle to gate. It covers raw materials and energy supply, transport, f...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This document covers all life cycle stages, from cradle to grave, namely product stage, construction process stage, use stage and end-of-life stage of glass products (see Clause 4), used in buildings.
While covering all life cycle stages, this PCR primarily focuses on the product stage, in particular the manufacturing of flat glass and the consequent processing into flat glass products (as listed in point 4.), from cradle to gate. It covers raw materials and energy supply, transport, flat glass...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of coated glass for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of insulating glass units (IGU) for use in buildings.
NOTE 1    For glass products with electrical wiring or connections for e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
NOTE 2   Units for which the intended use is only ‘artistic’ and therefore no essential requirement is required, are not subject to CE marking and are not part of this standard.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the routine factory production control, the periodic testing and inspection and test methods to verify that an insulating glass unit (IGU) conforms to the system description.

    • sale 10% off
    • Draft
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and describes the test methods for edge seal components and inserts. This includes the identification, the determination of physical attributes and the evaluation of characteristics for use in substitution rules in accordance with prEN 1279-1:2015.
For the purpose to demonstrate that edge seal components will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6, prEN 1279-2:2015 and prEN 1279-3:2015 ...
view more

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of gas leakage rate and specifies the requirements for limit values for gas leakage rate and gas concentration for gas filled insulating glass units made
a) in accordance with prEN 1279-1:2015 and prEN 1279-6:2015 or
b) for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a) in accordance with prEN 1279-1:2015 and prEN 1279-6:2015 or
b) for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard (all parts) covers the requirements for insulating glass units. The main intended uses of the insulating glass units are installations in windows, doors, curtain walling, structural sealant glazing, roofs and partitions.
The achievement of the requirements of this standard indicates that insulating glass units fulfil the needs for intended use and ensures by means of the evaluation of conformity to this standard that, visual, energetic, acoustic, safety parameters do not ...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of coated glass for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of gas leakage rate and specifies the requirements for limit values for gas leakage rate and gas concentration for gas filled insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018, or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document (all parts) covers the requirements for insulating glass units. The main intended uses of the insulating glass units are installations in windows, doors, curtain walling, bonded glazing for doors, windows and curtain walling, roofs and partitions.
The achievement of the requirements of this standard indicates that insulating glass units fulfil the needs for intended use and ensures by means of the evaluation of conformity to this standard that, visual, energetic, acoustic, safety ...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements and describes the test methods for edge seal components and inserts. This includes the identification, the determination of physical attributes and the evaluation of characteristics for use in substitution rules in accordance with EN 1279 1:2018.
For the purpose to demonstrate that edge seal components will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6, EN 1279 2:2018 and EN 1279 3:2018 also apply.

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This document covers the product standard of insulating glass units (IGU) for use in buildings.
Units for which the intended use is only artistic and therefore no essential characteristics are required, are not subject to CE marking and are not part of this standard.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This document describes the routine factory production control, the periodic testing and inspection and test methods to verify that an insulating glass unit (IGU) conforms to the system description.

    • sale 10% off
    • Draft
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This document describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018; or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of basic alumino silicate glass products for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies minimum quality requirements (in respect of optical, visual and edge faults) and durability tests for painted glass for internal use in building.
This standard applies to testing of paints that can be used to produce painted glass. The test of durability are undertaken on soda lime silicate glass  as being a representative substrate.
Painted glass, that conforms to this standard, may have substrate as follows: basic glass, special basic glass, chemically strengt...
view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the assessment and verification of constancy of performance and the factory production control of basic alumino silicate glass products for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies minimum quality requirements (in respect of optical, visual and edge faults) and durability tests for painted glass for internal use in building.
This standard applies to testing of paints that can be used to produce painted glass. The test of durability are undertaken on soda lime silicate glass  as being a representative substrate.
Painted glass, that conforms to this standard, may have substrate as follows: basic glass, special basic glass, chemically strengt...
view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

1   Scope
This European Standard gives principles of glazing as well as recommendations on the selection of components, e.g. frame sections, beads, drainage holes, etc., for fitting glass into frames of any material.
This European Standard applies to all basic types of edge supported vertical and sloping glazing systems, in all types of fixed or opening frames used in buildings.
This European standard specifies also the functions, requirements and installation of glazing blocks within a frame duri...
view more

    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened soda lime silicate safety glass for use in buildings.
Information on curved heat soaked thermally toughened soda lime silicate safety glass is given in Annex B, but this product does not form part of this European Standard.
Other requirements, not specified in this European Standar...
view more

    • sale 10% off
    • Draft
      51 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the heat soak process system together with tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened soda lime silicate safety glass for use in buildings.
Curved heat soaked thermally toughened soda lime silicate safety glass is not part of this European Standard.
Other requirements, not specified in this European Standard, can apply to heat soaked thermally toughened soda lime s...
view more

    • sale 10% off
    • Draft
      51 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard defines principles of glazing as well as recommendations on the selection of components, e.g. frame sections, beads, drainage holes, etc., for fitting glazing into frames of any material.
This European Standard applies to all basic types of edge supported vertical and sloping glazing systems, in all types of fixed or opening frames used in buildings.
This European standard specifies also the functions, requirements and installation of glazing blocks within a frame during...
view more

    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies and classifies basic alumino silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and their minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to basic alumino silicate glasses supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a di...
view more

    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This European Standard defines a test method to establish the self-cleaning performances for coatings on glass which utilize sun, rain or a combination of sun and rain to enhance the cleanliness of the glass.
The European Standard applies to class A coated glass as defined in EN 1096 1 and EN 1096-2 for use in outdoor building applications. The test is designed to be applicable for coatings on glass which use hydrophilic or photocatalytic active functionalities to enhance the cleanliness of the...
view more

    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard defines a test method to establish the self-cleaning performances for coatings on glass which utilize sun, rain or a combination of sun and rain to enhance the cleanliness of the glass.
The European Standard applies to class A coated glass as defined in EN 1096 1 and EN 1096 2 for use in outdoor building applications. The test is designed to be applicable for coatings on glass which use hydrophilic or photocatalytic active functionalities to enhance the cleanliness of the...
view more

    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies and classifies basic alumino silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and their minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to basic alumino silicate glasses supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a di...
view more

    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass product that has had an adhesive backed polymeric film applied, for use in
buildings. The adhesive backed polymeric film is based on biaxially oriented polyester film as defined in EN 15752-1. This applies to both site and factory applications. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). O...
view more

    • sale 10% off
    • Draft
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

EN 15752-1 defines adhesive backed polymeric film based on biaxially oriented polyester film, and the performance characteristics of adhesive backed polymeric film for use on glass in buildings. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to other glass or glazing products, e.g. laminated glass or insulating glass units, when adhesive backed polymeric film is inc...view more

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass product that has had an adhesive backed polymeric film applied, for use in buildings. The adhesive backed polymeric film is based on biaxially oriented polyester film as defined in
FprEN 15752-1. This applies to both site and factory applications.
This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PV...
view more

    • sale 10% off
    • Draft
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard defines adhesive backed polymeric film based on biaxially oriented polyester film, and the performance characteristics of adhesive backed polymeric film for use on glass in buildings.
This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC).
Other requirements, not specified in this standard, may apply to other glass or glazing products, e.g. laminated glass or insulating glass units, when adhesive backed polymer...
view more

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of painted glass for internal use in buildings.
Note   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      30 pages
      English language
    • e-Library read for
      1 day

This document is currently submitted to the Enquiry and formal vote Procedure to amend clauses 7.1., 7.4.3., 8.3. and 10.

    • sale 10% off
    • Amendment
      5 pages
      English language
    • e-Library read for
      1 day

This document is currently submitted to the Enquiry and formal vote Procedure to amend clauses 7.1., 7.4.3., 8.3. and 10.

    • sale 10% off
    • Amendment
      5 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of painted glass for internal use in buildings.
Note   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      30 pages
      English language
    • e-Library read for
      1 day