IEC 62512:2012 provides a globally applicable and agreed method to test the washing and drying function of washer-dryers. Although this standard is based on IEC 61121:2012 on tumble dryers and IEC 60456:2010 on clothes washers, it specifies the conditions needed to test the combined function of washing and drying. The main elements of this standard are:   - the definition of the loads to be tested in continuous and interrupted operation cycles;  - the method for testing automatic and not automat...view more

    • sale 10% off
    • Amendment
      50 pages
      English language
    • e-Library read for
      1 day

This document applies to cooking fume extractors incorporating a fan for the recirculation
or extraction mode situated in a household kitchen.
It can also be used for cooking fume extractors where the fan is mounted separately from the
appliance, but controlled by the appliance when the fan is defined in the technical
documentation (e.g. name plate data) and instructions for installation.
This document deals also with down-draft systems arranged beside, behind or under the
cooking applianc...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

2018-03-27: CMs to 65187.

    • sale 10% off
    • Amendment
      8 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      7 pages
      English language
    • e-Library read for
      1 day

This document defines product category rules (PCR) for electronic and electrical products and systems (EEPS).
It specifies the process and requirements on how to conduct life cycle assessment in the context of
environmental declarations.
PCR is complemented by additional product-specific rules (PSR), which further define e.g. functional units and
default scenarios in the product-specific context. Therefore, it also provides guidance on how to develop PSR
in corresponding technical committee...
view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This Technical Specification provides a measurement and evaluation method for the determination of the representative maximum temperature reached inside the base load during the washing cycle of a washing machine or washer-dryer.
The mean maximum temperature within the base load is measured with three temperature sensors, which are attached to towels and/or pillowcases placed in different, representative locations inside the drum.
This Technical Specification does not provide a method for me...
view more

    • sale 10% off
    • Technical specification
      15 pages
      English language
    • e-Library read for
      1 day

This document is part of the of the EN 50708 series which applies to transformers in compliance with EN 60076 1.

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

The scope of this document is to define performance requirements of Large Power Transformers in compliance with prEN 50708 1 1:2019.
NOTE    This document covers the transformers under the EU Regulation N. 548/2014 and Amendment of 2019, gives additional specific guidance for single phase transformers, autotransformers, multi winding transformers and for transformers with OD and OF cooling systems, necessary for the correct application of energy efficiency requirements to these categories of tran...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

The scope of this document is to define the energy performance of Medium Power Transformers in compliance with prEN 50708-1-1:2019.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

2019-12-24: decision to skip FV taken by TC - mail from TC 2019-12-23

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

2019-12-24: decision to skip FV taken by TC - mail from TC 2019-12-23

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

IEC 61121:2012(E) is applicable to household electric tumble dryers of the automatic and non-automatic type, with or without a cold water supply and incorporating a heating device. This excludes tumble dryers which use gas or other fuels as a heating source. The object is to state and define the principal performance characteristics of household electric tumble dryers of interest to users and to describe standard methods for measuring these characteristics. This edition includes significant tech...view more

    • sale 10% off
    • Amendment
      10 pages
      English language
    • e-Library read for
      1 day

This document defines product category rules (PCR) for electronic and electrical products and systems (EEPS).
It specifies the process and requirements on how to conduct life cycle assessment in the context of
environmental declarations.
PCR is complemented by additional product-specific rules (PSR), which further define e.g. functional units and
default scenarios in the product-specific context. Therefore, it also provides guidance on how to develop PSR
in corresponding technical committee...
view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

IEC 61121:2012(E) is applicable to household electric tumble dryers of the automatic and non-automatic type, with or without a cold water supply and incorporating a heating device. This excludes tumble dryers which use gas or other fuels as a heating source. The object is to state and define the principal performance characteristics of household electric tumble dryers of interest to users and to describe standard methods for measuring these characteristics. This edition includes significant tech...view more

    • sale 10% off
    • Amendment
      10 pages
      English language
    • e-Library read for
      1 day

2019-10-24 PeC: to revisit after SLR is published

    • sale 10% off
    • Amendment
      23 pages
      English language
    • e-Library read for
      1 day

2019-10-24 PeC: to revisit after SLR is published

    • sale 10% off
    • Amendment
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements for metal halide lamps for general lighting purposes. For some of the requirements given in this document, reference is made to "the relevant lamp data sheet". For some lamps, these data sheets are contained in this document. For other lamps, falling under the scope of this document, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this document relate only to type testing. The requirements and...view more

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This European Standard defines methods for the measurement of energy consumption of vending machines, whether or not fitted with refrigerating appliances.
The standard applies (but is not limited) to the categories shown in Table 1 of machine types.
For verification purposes all the tests specified are to be applied to a single unit.  The tests may also be made individually for the study of a particular characteristic.
This standard does not deal with any characteristics of machine design oth...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This document defines methods for the measurement of energy consumption of vending machines, whether or not fitted with refrigerating appliances. The standard applies (but is not limited) to the categories shown in Table 1 of machine types. The following types of vending machine are excluded from this standard: — drink machines dispensing hot and/or cold drinks into cups; — machines with a food heating function; — vending machines operating at temperatures below 0 °C; or — any machine including ...view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements for metal halide lamps for general lighting purposes. For some of the requirements given in this document, reference is made to "the relevant lamp data sheet". For some lamps, these data sheets are contained in this document. For other lamps, falling under the scope of this document, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this document relate only to type testing. The requirements and...view more

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements for metal halide lamps for general
lighting purposes.
For some of the requirements given in this document, reference is made to “the relevant lamp
data sheet”. For some lamps, these data sheets are contained in this document. For other
lamps, falling under the scope of this document, the relevant data are supplied by the lamp
manufacturer or responsible vendor.
The requirements of this document relate only to type testing.
The requireme...
view more

    • sale 10% off
    • Standard
      415 pages
      English language
    • e-Library read for
      1 day

This International Standard applies to outdoor and indoor bushings of any voltage used on DC
systems, of capacitance graded or gas insulated types for use as components of oil-filled
converter transformers and smoothing reactors, as well as air-to-air DC bushings. This
standard does not apply to the following:
• cable terminations (potheads);
• bushings for instrument transformers;
• bushings for test power supplies;
• bushings applied with gaseous insulation (other than air at atmospheri...
view more

    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

IEC 61167:2018 specifies the performance requirements for metal halide lamps for general lighting purposes. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. a) A set of new lamp data sheets has been introduced for lamp types designed for replacing high pressure sodium lamps. b) A set of new lamp data sheets has been in...view more

    • sale 10% off
    • Standard
      415 pages
      English language
    • e-Library read for
      1 day

This European standard is applicable to tumble dryers intended to be used by trained users e.g. in hotels, hospitals, factories, in light industry and on farms. It covers tumble dryers declared for commercial use in public areas and operated by lay persons e.g. in launderettes, apartment houses and communal laundry rooms. This European standard covers tumble dryers which use electricity, gas or steam as a heating source.
The object is to state and define the principal performance characteristi...
view more

    • sale 10% off
    • Standard
      65 pages
      English language
    • e-Library read for
      1 day

This European standard deals with the performance of clothes washing machines intended to be used by trained users e.g. in hotels, hospitals, factories, in light industry and on farms. It also covers washing machines declared for commercial use in public areas and operated by lay persons e.g. in launderettes, apartment houses and communal laundry rooms. The clothes washing machines can be utilizing cold and/or hot water supply and without heating or with heating devices for electricity, steam or...view more

    • sale 10% off
    • Standard
      112 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with the performance of clothes washing machines intended to be used by trained users e.g. in hotels, hospitals, factories, in light industry and on farms. It also covers washing machines declared for commercial use in public areas and operated by lay persons e.g. in launderettes, apartment houses and communal laundry rooms. The clothes washing machines can be utilizing cold and/or hot water supply and without heating or with heating devices for electricity, steam or...view more

    • sale 10% off
    • Standard
      112 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to tumble dryers intended to be used by trained users e.g. in hotels, hospitals, factories, in light industry and on farms. It covers tumble dryers declared for commercial use in public areas and operated by lay persons e.g. in launderettes, apartment houses and communal laundry rooms. This European Standard covers tumble dryers which use electricity, gas or steam as a heating source. The object is to state and define the principal performance characteristics...view more

    • sale 10% off
    • Standard
      65 pages
      English language
    • e-Library read for
      1 day

2016-01-19: If the vote is accepted update directive information in mother standard.
Common modifications to be merged with PR=60123

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      8 pages
      English language
    • e-Library read for
      1 day

2016-01-19: If the vote is accepted update directive information in mother standard.
Common modifications intended for merge with PR=60123 & then transformed to homegrown AMD, as mother EN published as IEC identical

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      8 pages
      English language
    • e-Library read for
      1 day

This International Standard applies to outdoor and indoor bushings of any voltage used on DC systems, of capacitance graded or gas insulated types for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air DC bushings. This standard does not apply to the following: • cable terminations (potheads); • bushings for instrument transformers; • bushings for test power supplies; • bushings applied with gaseous insulation (other than air at atmospheric press...view more

    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This European Standard provides methods to determine, by means of tests, measurements and/or calculations:
-   The energy consumption of desktop computers, integrated desktop computers and notebook computers in OFF mode, with Wake-on-LAN (when available) enabled and disabled;
-   The energy consumption of desktop computers, integrated desktop computers and notebook computers in other modes of operation, including low power state(s);
-   The lowest power state of desktop computers, integrated deskt...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60350 defines methods for measuring the performance of electric hobs for
household use.
Appliances covered by this document can be built-in or designed to be placed on a work
surface. The hob can also be a part of a cooking range.
This document does not apply to portable appliances for cooking, grilling and similar functions
(see IEC 61817).
This document defines the main performance characteristics of hobs which are of interest to
the user and specifies methods for measu...
view more

    • sale 10% off
    • Standard
      79 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to new three-phase and single-phase power transformers with a highest voltage for equipment exceeding 36 kV and a rated power equal or higher than 5 kVA, or a rated power equal to or higher than 40 MVA regardless of the highest voltage for equipment.
The scope of this European Standard is the following:
-   Defining the appropriate energy efficiency criteria;
-   Setting of benchmark minimum efficiency levels for new transformers based on an assessment of the energy...
view more

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

IEC 60350-2:2017(E) defines methods for measuring the performance of electric hobs for household use. Appliances covered by this document can be built-in or designed to be placed on a work surface. The hob can also be a part of a cooking range. This document does not apply to portable appliances for cooking, grilling and similar functions (see IEC 61817). This document defines the main performance characteristics of hobs which are of interest to the user and specifies methods for measuring these...view more

    • sale 10% off
    • Standard
      79 pages
      English language
    • e-Library read for
      1 day

This document defines data models for Interoperable Connected Household Appliances. The data model is derived from a logical decomposition of use cases into functional blocks that themselves are realized by abstract actions on the data model itself.

    • sale 10% off
    • Standard
      462 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to new three-phase and single-phase power transformers with a highest voltage for equipment exceeding 36 kV and a rated power equal or higher than 5 kVA, or a rated power equal to or higher than 40 MVA regardless of the highest voltage for equipment. The scope of this European Standard is the following: - Defining the appropriate energy efficiency criteria; - Setting of benchmark minimum efficiency levels for new transformers based on an assessment of the energy ef...view more

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This document defines data models for Interoperable Connected Household Appliances. The data model is derived from a logical decomposition of use cases into functional blocks that themselves are realized by abstract actions on the data model itself.

    • sale 10% off
    • Standard
      462 pages
      English language
    • e-Library read for
      1 day