This product standard applies to devices operating within the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications, in relation to exposure to electromagnetic fields
The object of this generic standard is to provide a route for evaluation of such equipment against limits on human exposure to electric, magnetic and electromagnetic fields, and induced and contact current.
NOTE   Other standards can apply to products covered by this document. In particular this document is not designed to evaluate the electromagnetic compatibility with other equipment; nor does it reflect any product safety requirements other than those specifically related to human exposure to electromagnetic fields.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard is related to human exposure to radiofrequency electromagnetic fields transmitted by base station equipment in the frequency range 110 MHz to 100 GHz.
The object is to assess the compliance of such equipment with the general public basic restrictions (directly or indirectly via compliance with reference levels) and the workers’ exposure limits values (directly or indirectly via compliance with action values), when it is put into service in its operational environment.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to wireless communication devices used in close proximity to the human ear (e.g. mobile phones, wireless headsets). The applicable frequency range is from 300 MHz to 6 GHz.
The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields.
For devices used next to the body or in front of the face the applicable product standard is EN 50566:2017.
For low power devices the applicable product standard is prEN 50663:2016.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to wireless communication devices used at distances up to and including 200 mm from the human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, camera or Bluetooth add-on), or embedded in garments. The applicable frequency range is from 30 MHz to 6 GHz.
The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields.
For devices used next to the ear the applicable product standard is EN 50360:2017.
For low power devices the applicable product standard is prEN 50663:2016.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies in the vicinity of base station as defined in 3.2 the measurement methods, the measurement systems and the post processing that shall be used to determine in-situ the electromagnetic field for human exposure assessment in the frequency range 100 kHz to 300 GHz.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to fixed stand alone broadcast transmitter operating in the frequency range 30 MHz to 40 GHz when put on the market. The term broadcast transmitter covers fixed stand alone broadcast transmitters intended for use with external antennas of the same or an other manufacturer. The object of this standard is to demonstrate the compliance of such equipment with the reference levels or the basic restrictions related to public exposure to radio frequency electromagnetic fields.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This basic standard applies to Base Stations as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of this basic standard is to specify, for such equipment and when it is put into service in its operational environment, the methods to assess the value of the Total Exposure Ratio or to establish whether the Total Exposure Ratio is less than or equal to one in relevent areas where the general public has access.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives elements to establish methods for measurement and calculation of quantities associated with the assessment of human exposure to electric, magnetic and electromagnetic fields (EMF) in the frequency range from 0 Hz to 300 GHz. The major intention of this Basic Standard is to give the common background and information to relevant EMF standards. This Basic Standard cannot go into details extensively due to the broad frequency range and the huge amount of possible applications. Therefore it is not possible to specify detailed calculation or measurement procedures in this Basic Standard. This standard provides general procedures only for those product and workplace categories for which there do not exist any relevant assessment procedures in any existing European EMF basic standard. If there exists an applicable European EMF standard focused on specific product or workplace categories then the assessment shall follow that standard. If an applicable European EMF standard does not exist, but an applicable assessment procedure in another European EMF standard does exist, then that assessment procedure shall be used. This standard deals with quantities that can be measured or calculated in free space, notably electric and magnetic field strength or power density, and includes the measurement and calculation of quantities inside the body that forms the basis for protection guidelines. In particular the standard provides information on - definitions and terminology, - characteristics of electric, magnetic and electromagnetic fields, - measurement of exposure quantities, - instrumentation requirements, - methods of calibration, - measurement techniques and procedures for evaluating exposure, - calculation methods for exposure assessment.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to equipment for arc welding and allied processes designed for use in industrial or domestic environments, including welding power sources, wire feeders and ancillary equipment, e.g. torches, liquid cooling systems and arc striking and stabilising devices.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Corrigendum issued following a mistake in the French translation in Clause 6.

  • Corrigendum
    1 page
    French language
    sale 10% off
    e-Library read for
    1 day

This basic standard applies to radio base stations and fixed terminal stations for wireless telecommunication systems as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of the standard is to specify, for such equipment, the method for assessment of compliance distances according to the basic restrictions (directly or indirectly via compliance with reference levels) related to human exposure to radio frequency electromagnetic fields.

  • Corrigendum
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to any wireless communication devices intended to be used with the radiating part in close proximity to the human body (i.e. less than 200 mm) including devices operated in front of the face. The frequency range covered is 30 MHz to 6 GHz. The objective of this product standard is to demonstrate the compliance of such devices with the basic restrictions related to general public exposure to radio frequency electromagnetic fields. Devices used next to the ear are covered by EN 50360. Low power exclusion criteria are specified in EN 62479.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to any transmitting devices intended to be used with the ratiating part of the equipment in close proximity to the human ear (e.g. mobile phones, cordless telephones, etc.).

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to base stations as defined in Clause 3, operating in the frequency range 110 MHz to 40 GHz. The objective of the standard is to verify that such product complies with the basic restrictions directly or via compliance with reference levels related to the general public exposure to radio frequency electromagnetic fields in the frequency range 100 kHz to 40 GHz, where the general public has access and when it is put into service in its operational environment.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to base stations as defined in Clause 3, operating in the frequency range 110 MHz to 40 GHz. The objective of the standard is to verify that such product complies with the basic restrictions directly or via compliance with reference levels related to the general public exposure to radio frequency electromagnetic fields in the frequency range 100 kHz to 40 GHz, where the general public has access and when it is put into service in its operational environment.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to radio base stations and fixed terminal stations for wireless telecommunication systems as defined in Clause 3, operating in the frequency range 110 MHz to 40 GHz.
The object of this standard is to demonstrate the compliance of such product with the basic restrictions (directly or indirectly via compliance with reference levels) related to occupational exposure to radio frequency electromagnetic fields.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to any transmitting devices intended to be used with the ratiating part of the equipment in close proximity to the human ear (e.g. mobile phones, cordless telephones, etc.).

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to devices operating within the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications, in relation to exposure to electromagnetic fields The object of this generic standard is to provide a route for evaluation of such equipment against limits on human exposure to electric, magnetic and electromagnetic fields, and induced and contact current. NOTE Other standards can apply to products covered by this document. In particular this document is not designed to evaluate the electromagnetic compatibility with other equipment; nor does it reflect any product safety requirements other than those specifically related to human exposure to electromagnetic fields.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to wireless communication devices used in close proximity to the human ear (e.g. mobile phones, wireless headsets). The applicable frequency range is from 300 MHz to 6 GHz. The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields. For devices used next to the body or in front of the face the applicable product standard is EN 50566:2017. For low power devices the applicable product standard is EN 50663:2017.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to wireless communication devices used at distances up to and including 200 mm from the human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, camera or Bluetooth add-on), or integrated into garments. The applicable frequency range is from 30 MHz to 6 GHz. The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields. For devices used next to the ear the applicable product standard is EN 50360:2017 [1]. For low power devices the applicable product standard is EN 50663:2017 [2].

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard is related to human exposure to radiofrequency electromagnetic fields transmitted by base station equipment in the frequency range 110 MHz to 100 GHz. The object is to assess the compliance of such equipment with the general public basic restrictions (directly or indirectly via compliance with reference levels) and the workers’ exposure limits values (directly or indirectly via compliance with action levels), when it is put into service in its operational environment.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies procedures for assessment of electric, magnetic and electromagnetic fields produced by industrial and professional induction heating equipment.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product family standard applies to equipment for resistance welding, arc welding and allied processes designed for use in industrial or domestic environments, including welding power sources, wire feeders and ancillary equipment, e.g. torches, liquid cooling systems and arc striking and stabilising devices.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices (30 MHz - 6 GHz)

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This basic standard applies to radio base stations and fixed terminal stations for wireless telecommunication systems as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of the standard is to specify, for such equipment, the method for assessment of compliance distances according to the basic restrictions (directly or indirectly via compliance with reference levels) related to human exposure to radio frequency electromagnetic fields.

  • Corrigendum
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This basic standard applies to radio base stations and fixed terminal stations for wireless telecommunication systems as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of the standard is to specify, for such equipment, the method for assessment of compliance distances according to the basic restrictions (directly or indirectly via compliance with reference levels) related to human exposure to radio frequency electromagnetic fields.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Superseded by EN 62233:2008

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to devices operating within the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications. This product standard may be used for demonstration of compliance to the requirements of the RTTE Directive 1999/5/EC, with regard to the limitation of human exposure to electromagnetic fields (EMFs). There are additional requirements covered by the Directive, which are not included in this product standard. This product standard may be used for demonstration of compliance to the requirements of the Low Voltage Directive 2006/95/EC, with regard to the limitation of human exposure to EMFs. There are additional requirements covered by the Directive, which are not included in this product standard. It should be noted that the supplier of a specific piece of equipment might not know the overall exposure environment in which the equipment is being used. This product standard can only assess the human exposure from the specific equipment under evaluation when being used according to the supplier’s guidelines. Other standards can apply to products covered by this document. In particular this document is not designed to evaluate the electromagnetic compatibility with other equipment; nor does it reflect any product safety requirements other than those specifically related to human exposure to electromagnetic fields.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives elements to establish methods for measurement and calculation of quantities associated with the assessment of human exposure to electric, magnetic and electromagnetic fields (EMF) in the frequency range from 0 Hz to 300 GHz. The major intention of this Basic Standard is to give the common background and information to relevant EMF standards. This Basic Standard cannot go into details extensively due to the broad frequency range and the huge amount of possible applications. Therefore it is not possible to specify detailed calculation or measurement procedures in this Basic Standard. This standard provides general procedures only for those product and workplace categories for which there do not exist any relevant assessment procedures in any existing European EMF basic standard. If there exists an applicable European EMF standard focused on specific product or workplace categories then the assessment shall follow that standard. If an applicable European EMF standard does not exist, but an applicable assessment procedure in another European EMF standard does exist, then that assessment procedure shall be used. This standard deals with quantities that can be measured or calculated in free space, notably electric and magnetic field strength or power density, and includes the measurement and calculation of quantities inside the body that forms the basis for protection guidelines. In particular the standard provides information on • definitions and terminology, • characteristics of electric, magnetic and electromagnetic fields, • measurement of exposure quantities, • instrumentation requirements, • methods of calibration, • measurement techniques and procedures for evaluating exposure, • calculation methods for exposure assessment.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies in the vicinity of base station as defined in 3.2 the measurement methods, the measurement systems and the post processing that shall be used to determine in-situ the electromagnetic field for human exposure assessment in the frequency range 100 kHz to 300 GHz.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to equipment for resistance welding and allied processes designed for use in industrial or domestic environments. NOTE 1 Typical allied processes are resistance hard and soft soldering or resistance heating achieved by means comparable to resistance welding equipment. This European Standard establishes a suitable evaluation method for determining the electromagnetic fields in the space around the equipment and defines standardized operating conditions and measuring distances. It provides a method to show conformity with guidelines or requirements concerning human exposure to electromagnetic fields. The Directive 2006/95/EC of the European Parliament and the Council [1], Article 2, stipulates that the Member States take all appropriate measures to ensure that electrical equipment may be placed on the market only if, having been constructed in accordance with good engineering practice in safety matters in force in the Community, it does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which is was made. The principal elements of those safety objectives are listed in Annex I Clause 2.b. This standard may be used in conjunction with EN 50445 for demonstration of conformity to the Council Directive with reference to human exposure to electromagnetic fields (EMF). There are additional requirements covered by Article 2 and Annex I Clause 2.b, which are not included in this document. The Council Recommendation 1999/519/EC [2] provides Basic Restrictions and Derived reference levels for exposure of the general public. This standard may be used for demonstration of resistance welding equipment conformity to the Council Recommendation on this basis, but there may be additional specific national or international requirements which are not included. The ICNIRP Guidelines [3], on limits of exposure to static magnetic fields as well as for limiting exposure in time varying electric, magnetic and electromagnetic fields, provide Basic restrictions and Derived reference levels for both occupational and general exposure. This standard may be used for demonstration of equipment conformity to ICNIRP Guidelines on this basis, but there may be additional national or international requirements which are not included. It is also possible to use this document as a basis to demonstrate conformity of resistance welding equipment to other national and international guidelines or requirements with regard to human exposure from EMF, for example Council Directive 2004/40/EC [4] on the minimum health and safety requirements regarding the exposure of workers to the risk arising from physical agents (electromagnetic fields), or the requirements of the Directive 98/37/EC [5]. In these cases, other restrictions and levels than those referenced above may be used. Other standards may apply to equipment covered by this standard. In particular this standard can not be used to demonstrate electromagnetic compatibility with other equipment; nor does it specify any product safety requirements other than those specifically related to human exposure to electromagnetic fields. The frequency range covered is 0 Hz to 300 GHz.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to equipment for arc welding and allied processes designed for use in industrial or domestic environments, including welding power sources, wire feeders and ancillary equipment, e.g. torches, liquid cooling systems and arc striking and stabilising devices. NOTE Allied processes are for example electric arc cutting and arc spraying. This standard specifies procedures for assessment of electromagnetic fields produced by arc welding equipment and defines standardized operating conditions and test set-ups. This standard may be used as a basis to demonstrate compliance to national and international guidelines or requirements with regard to human exposure to EMF from arc welding equipment [1] [2]. Other standards may apply to products covered by this standard. In particular this standard can not be used to demonstrate electromagnetic compatibility with other equipment; nor does it specify any product safety requirements other than those specifically related to human exposure to electromagnetic fields.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product family standard applies to equipment for resistance welding, arc welding and allied processes designed for use in industrial or domestic environments, including welding power sources, wire feeders and ancillary equipment, e.g. torches, liquid cooling systems and arc striking and stabilising devices. NOTE 1 Allied processes are for example resistance hard and soft soldering, resistance heating by means comparable to resistance welding equipment, electric arc cutting and arc spraying. The frequency range covered is 0 Hz to 300 GHz. This product family standard may be used to demonstrate compliance with the requirements of Directive 2006/95/EC [1] (needed for placing electric welding equipment on the European market), with regard to the limitation of human exposure to electromagnetic fields (EMF). There are additional requirements in the Directive, which are not included in this product family standard. NOTE 2 The Directive 2006/95/EC [1], Article 2, stipulates that the Member States take all appropriate measures to ensure that electrical equipment may be placed on the market only if, having been constructed in accordance with good engineering practice in safety matters in force in the Community. This product family standard may also be used for assessment regarding the requirements of Directive 2004/40/EC [3] on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) or Recommendation 1999/519/EC [2] on the limitation of exposure of the general public to electromagnetic fields, provided that no other relevant field sources are present in close proximity. If other relevant field sources are present, additional assessment is necessary. NOTE 3 It should be noted that the supplier of specific equipment might not know the overall exposure environment in which the equipment is being used. This product family standard can only be used to assess human exposure from the specific equipment under evaluation when being used in accordance with the suppliers guidelines. NOTE 4 Assessment procedures for workplaces with multiple field-sources may be found in EN 50499 [7]. Other standards may apply to products covered by this product family standard. In particular this standard can not be used to demonstrate electromagnetic compatibility with other equipment; nor does it specify any product safety requirements other than those specifically related to human exposure to electromagnetic fields. NOTE 5 Procedures to demonstrate compliance are not specified for the whole frequency range.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies procedures for assessment of electric, magnetic and electromagnetic fields produced by industrial and professional induction heating equipment. NOTE This European Standard does not apply to household appliances. Typical induction heating applications are for example: - melting; - zone-melting; - heating before hot forming; - heating by tunnel-inductor; - hardening / coaxial transformer handheld devices; - tube welding; - tube annealing; - hardening; - soldering; - hard-soldering /brazing; - bonding; - annealing; - metal-strip and wire heating; - tempering; - sintering; - shrinking. This product standard covers the frequency range up to 30 MHz taking into account the specific characteristics of industrial and professional induction heating equipment and its usage. This European Standard may also be used for assessment regarding the requirements of Directive 2004/40/EC [1] on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields), provided that no other relevant field sources are present in close proximity. If other field sources are present, additional assessment according to EN 50499:2008 is necessary. This European Standard does not cover protective measures for people with active implants.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

D109/093: CLC/TC 211 renumbered CLC/TC 106X

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This basic standard applies to Base Stations as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of this basic standard is to specify, for such equipment and when it is put into service in its operational environment, the methods to assess the value of the Total Exposure Ratio or to establish whether the Total Exposure Ratio is less than or equal to one in relevent areas where the general public has access.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to base stations as defined in Clause 3, operating in the frequency range 110 MHz to 40 GHz. The objective of the standard is to verify that such product complies with the basic restrictions directly or via compliance with reference levels related to the general public exposure to radio frequency electromagnetic fields in the frequency range 100 kHz to 40 GHz, where the general public has access and when it is put into service in its operational environment.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Listing under LVD and R&TTE expected together with EN 50413 * Superseded by EN 62311:2008

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to fixed stand alone broadcast transmitter operating in the frequency range 30 MHz to 40 GHz when put on the market. The term broadcast transmitter covers fixed stand alone broadcast transmitters intended for use with external antennas of the same or an other manufacturer. The object of this standard is to demonstrate the compliance of such equipment with the reference levels or the basic restrictions related to public exposure to radio frequency electromagnetic fields.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Superseded by EN 62233:2008

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This product standard applies to radio base stations and fixed terminal stations for wireless telecommunication systems as defined in Clause 3, operating in the frequency range 110 MHz to 40 GHz. The object of this standard is to demonstrate the compliance of such product with the basic restrictions (directly or indirectly via compliance with reference levels) related to occupational exposure to radio frequency electromagnetic fields.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day